• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1963-1969
• /
• 2009

This paper introduces method to estimate pollutant negative influence to polymer type insulator according to the international standard. To accomplish this goal, effective sample collecting method was surface was collected directly with the same dimension. Distilled Through this method pollute is easily and accurately collected. The second step is pollutant analysis. Several analyze item is selected such as quantity, conductivity, contact angle, Optical Microscope(OM), IR spectrometer(FT-IR), Equivalent Salt Deposit Density(ESDD), Thermal Analyzer(TA) and ICP-AES. The third step, best represent tunnel was selected considering location, length and natural surroundings. Also to consider the difference at inside the tunnel, several bracket insulators were selected along to the location. To make the result precise, above procedure was repeated several times at the same target. Finally relation among type of train, numbers of movement, surroundings, length will be considered in combination with the pollution. With this result pollute map for KORAIL could be accomplished and inspect period will be optimized case by case.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.45 no.1
• /
• pp.29-33
• /
• 2019

Objectives: Bone density seems to be an important factor affecting implant stability. The relationship between bone density and primary and secondary stability remains under debate. The aim of this study was to compare primary and secondary stability measured by resonance frequency analysis (RFA) between different bone types and to compare implant stability at different time points during 3 months of follow-up. Materials and Methods: Our study included 65 implants (BioHorizons Implant Systems) with 3.8 or 4.6 mm diameter and 9 or 10.5 mm length in 59 patients. Bone quality was assessed by Lekholm-Zarb classification. After implant insertion, stability was measured by an Osstell device using RFA at three follow-up visits (immediately, 1 month, and 3 months after implant insertion). ANOVA test was used to compare primary and secondary stability between different bone types and between the three time points for each density type. Results: There were 9 patients in type I, 18 patients in type II, 20 patients in type III, and 12 patients in type IV. Three implants failed, 1 in type I and 2 in type IV. Stability values decreased in the first month but increased during the following two months in all bone types. Statistical analysis showed no significant difference between RFA values of different bone types at each follow-up or between stability values of each bone type at different time points. Conclusion: According to our results, implant stability was not affected by bone density. It is difficult to reach a certain conclusion about the effect of bone density on implant stability as stability is affected by numerous factors.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.1
• /
• pp.66-74
• /
• 2012

In this paper, the impact of segregation layer density ($N_{DSL}$) and length ($L_{DSL}$) on scalability and analog/RF performance of dopant-segregated Schottky barrier (DSSB) SOI MOSFET has been investigated in sub-30 nm regime. It has been found that, although by increasing the $N_{DSL}$ the increased off-state leakage, short-channel effects and the parasitic capacitances limits the scalability, the reduced Schottky barrier width at source-to-channel interface improves the analog/RF figures of merit of this device. Moreover, although by reducing the $L_{DSL}$ the increased voltage drop across the underlap length reduces the drive current, the increased effective channel length improves the scalability of this device. Further, the gain-bandwidth product in a common-source amplifier based on optimized DSSB SOI MOSFET has improved by ~40% over an amplifier based on raised source/drain ultrathin-body SOI MOSFET. Thus, optimizing $N_{DSL}$ and $L_{DSL}$ of DSSB SOI MOSFET makes it a suitable candidate for future nanoscale analog/RF circuits.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.2
• /
• pp.91-94
• /
• 2003

Rhizotron technique was used to determine the zone of active root growth in contrasting field situations. The distribution of roots with depth showed most root in the 15∼30 cm layer with fewer in the 0∼15 cm and below 30 cm layer at Lincoln Farm, while root density increased with depth at Winchmore. At Mt Johm (Lake Tekapo) roots were more distributed near soil surface. Root density was increased with fertilizer and irrigation at Mt John. Root number showed the same trends as root length at all lesions. Tube method was good for comparative purposes, and for long-term root growth studies at the same place.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.27-34
• /
• 2000

In this paper, carrier transport mechanism and modulation response for SCH(Separate Confinement Heterostructure) SQW(Single Quantum Well) laser diodes were studied. In order to explain carrier transport mechanism, both carrier density and current density were calculated. The recombination current density in the quantum well as a function of the SCH length was also calculated. For the modulation response, linearizing the rate equation, we calculated the bandwidth, relaxation oscillation frequency, damping factor, and the K-factor.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.347-354
• /
• 2003

The dynamics of fluid flow through nanomachines is completely different from that of continuum. In this study, molecular dynamics simulations were performed for the flow of helium, neon, argon inside carbon(graphite) nanotubes of several sizes. The fluid was introduced into the nanotube at a given initial velocity according to given temperature. Diffusion coefficients were evaluated by Green-Kubo equation derived from Einstein relationship. The behaviour of the fluid was strongly dependent on the density of fluid and tube diameter, not on the tube length. It was found that the diffusion Coefficients increased With decreasing the density of molecules and increasing the diameter and temperature.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.158-161
• /
• 2002

We investigated whether controlled dynamization enhanced regenerative bone healing of the tibia in 12 adult mongrel dogs. An average of 2 cm (∼ 10% of bone length) lengthening was obtained. The left hindlimb was allowed dynamization of 1 mm, 2 mm, and 3 mm in magnitude when 1 cm (∼ 5%) of lengthening was achieved, whereas the right hindlimb was not dynamized and served as a control. Bone mineral density (BMD) of the regenerative bone was measured periodically until nine weeks after the end of distraction. After sacrifice, uniaxial compression testing was performed. Relative BMD ratio and

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.697-702
• /
• 2006

This paper deals with the free vibrations of immersed columns with soft base. The support condition of the column is represented by using a translational spring and a rotational spring. The eccentricity and rotatory inertia of the concentrated mass at the top are taken into account. In the governing equation for the free vibration of column, the density of immersed part was modified to account for the added fluid mass. The governing differential equations are solved numerically using the corresponding boundary conditions. Numerical results are presented to show the effects on the natural frequencies of non-dimensional system parameters: the mass density ratio of fluid to column, the ratio of fluid depth to span length, the ratio of tip mass to total column mass, the dimensionless mass moment of inertia, the eccentricity, the translation spring parameter, and the rotational spring parameter.

• Journal of Environmental Science International
• /
• v.11 no.12
• /
• pp.1321-1326
• /
• 2002

A numerical model is investigated to predict a behavior of the gaseous volatile organic compounds and a subsurface contamination caused by them in the unsaturated zone. Two dimensional advective-dispersion equation caused by a density difference and two dimensional diffusion equation are computed by a finite difference method in the numerical model. A laboratory experiment is also carried out to compare the results of the numerical model. The dimensions of the experimental plume are 1.2m in length, 0.5m in height, and 0.05m in thickness. In comparing the result of 2 methods used in the numerical model with the one of the experiment respectively, the one of the advective-dispersion equation shows better than the one the diffusion equation.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.3
• /
• pp.1-7
• /
• 2004

Using WAsP, which is PC-program for the vertical and horizontal extrapolation of wind data, annual energy production as well as wind energy density has been predicted for Haengwon wind farm in Jeju island. The predicted results were compared with real data derived from wind turbines in Haengwon wind farm. As the results, in order to produce more electric power, new wind turbines should be located along coastal line, which has comparatively high wind energy density. Also, the roughness length should be inputted to the Map Editor program for better agreement with real annual energy production.