• Tribology and Lubricants
• /
• 제31권1호
• /
• pp.6-12
• /
• 2015

This paper investigates the stick-slip characteristic of magnetorheological elastomer (MRE) between an aluminum plate and the surface of the MRE. MRE is a smart material and it can change its mechanical behavior with the interior iron particles under the influence of an applied magnetic field. Stick-slip is a movement of two surfaces relative to each other that proceeds as a series of jerks caused by alternate sticking from friction and sliding when the friction is overcome by an applied force. This special tribology phenomenon can lead to unnecessary wear, vibration, noise, and reduced service life of work piece. The stick-slip phenomenon is avoided as far as possible in the field of mechanical engineering. As this phenomenon is a function of material property, applied load, and velocity, it can be controlled using the characteristics of MRE. MRE as a soft smart material, whose mechanical properties such as modulus and stiffness can be changed via the strength of an external magnetic field, has been widely studied as a prospective replacement for general rubber in the mechanical domain. In this study, friction force is measured under different loads, speed, and magnetic field strength. From the test results, it is confirmed that the stick-slip phenomenon can be minimized under optimum conditions and can be applied in various mechanical components.

• 한국의상디자인학회지
• /
• 제7권2호
• /
• pp.25-37
• /
• 2005

This is a study on the origin of fashion imaging. First of all, 1 looked into the history of French fashion printmaking from late 16th century to early 19th century. Then studied the changes in the characteristics of context and form over the different periods and summarized each concept. At the same time, I looked into the process of fashion magazine evolving from fashion printmaking. In order to find out how fashion printmaking dealt with the characteristics of fashion media, 1 researched the commercial environment of fashion printmaking and reorganized the methodology of its media's role. Such analysis and results helped to reach a definition on how to regulate fashion printmaking. Fashion imaging was sparked by a small curiosity. As people began to be rage over new things, it came to introduce the fashion leaders of the public combined with the attributes of trend. At times when changes were so big that they were unpredictable, it itself became a fashion leader. Then a fashion creator emerges and it's function changes to that of a communication media. Moreover, the regular issuance of fashion printmaking implemented the concept of trend cycle and fashion imaging completely fulfilled the conditions of a communication media. The massive increase in the production of fashion printmaking and magazine contributed to the spread of fashion and the diffusion of printmaking lead to mutual complementation and synergy necessitated by fashion. Thus, the democratization of fashion and the commercialization of printmaking art occurred at the same time.

• 한국전자통신학회논문지
• /
• 제11권12호
• /
• pp.1209-1218
• /
• 2016

4대의 전동실린더를 이용하여 대형 유리판과 같은 부하를 신속하고 안전하게 이송하기 위해서는 동기오차가 허용된 범위 내에서 지속적으로 유지되어야 한다. 본 연구에서는 4대 이상의 전동실린더 간의 동기화에 적용 가능한 동기제어기법이 제안된다. 이 동기제어시스템은 디커플링 구조에 기반을 두고 있으며, 기준모델, 위치제어기 그리고 동기제어기로 구성된다. 기준모델은 각각의 실린더에 대해 상호 분리된 동기오차와 제어입력의 계산이 가능하도록 한다. I-PD형의 위치제어기는 각 실린더가 오버슈트와 입력포화를 일으키지 않고 지령을 추종하도록, 그리고 진상보상기형의 동기제어기는 루프정형을 통해 안정적으로 정밀한 동기가 되도록 설계 된다. 끝으로 토크외란이 인가된 상태에서도 4개의 실린더가 신속하고 안정적으로 동기를 유지하면서 목표지점에 도달됨을 시뮬레이션으로 검증한다.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1786-1795
• /
• 2015

It is common practice to identify the insulation faults of GIS through monitor the contents of SF₆ decomposed components. Partial discharges (PD) could lead to the decomposition of SF₆ dielectric, so new reactions usually occur in the mixture of the newly decomposed components including traces of H₂O and O₂. The new reactions also cause the decomposed components to differ due to the different amounts of H₂O and O₂ even under the same strength of PD. Thus, the accuracy of assessing the insulation faults is definitely influenced when using the concentration and corresponding change of decomposed components. In the present research, a needle-plate electrode was employed to simulate the PD event of a metal protrusion insulation fault for two main characteristic components SO₂F₂ and SOF₂, and to carry out influence analysis of trace H₂O and O₂ on the characteristic components. The research shows that trace H₂O has the capability of catching an F atom, which inhibits low-sulfide SF_x from recombining into high-sulfide SF₆. Thus, the amount of SOF₂ strongly correlates to the amount of trace H₂O, whereas the amount of SO₂F₂ is weakly related to trace H₂O. Furthermore, the dilution effect of trace O₂ on SOF₂ obviously exceeds that of SO₂F₂.

• International Journal of Safety
• /
• 제3권1호
• /
• pp.6-9
• /
• 2004

This paper deals with the noise evaluation technique of a reciprocating air-compressor and its noise reduction. The reciprocating air-compressors are widely used in the small, medium sized industrial firms, and lots of their employees are affected and irritated by their noise in the workplace. Thus, noise control actions should be taken appropriately by considering the hearing loss due to the occupational noise exposure. Lead-wrapping techniques are employed to identify the contribution of principal noise sources which are generally known as motor, belts, suction/discharge valves, moving pistons, and flow-induced noise caused by edges or discontinuities along the flow path e.g. expansions, contractions, junctions and bends etc .. As a result, main noise sources of the air-compressor can be categorized by the suction/discharge noise, valve noise, and compressed-air tank noise. Based on the investigations, mufflers are designed to reduce both the suction/discharge noise and the compressed-air tank noise. Instead of the conventional valve plate, polyethylene resin is used as a new one for the reduction of valve impact noise. In addition, attempts are made to reduce the valve noise propagation to the cylinder head and the compressor tank by using the insulation casings. As a result of the countermeasure plans, it can be achieved that the noise reduction of the air-compress is up to 10dB.

• 복합신소재구조학회 논문집
• /
• 제1권2호
• /
• pp.1-13
• /
• 2010

복합적층구조의 층간분리현상은 탄성좌굴하중을 감소시키며 설계값보다 낮은 수준에서 전체구조물의 파괴를 유발한다. 따라서 복합적층구조의 층간분리 현상은 매우 중요한 문제이며 많은 이론과 실험적인 연구가 진행되어왔다. 본 연구에서는 3차원 이론을 사용한 효과적인 유한요소법에 기초하여 임베디드된 사각형 층간분리 현상을 갖는 복합적층판의 탄성좌굴 거동을 분석하였다. 해석을 위해 개발된 3차원 유한요소는 EAS-SOLID8이라고 이름 붙여졌으며 강화된 대체 변형률 방법을 사용하였다. 임베디드된 사각형 층간분리를 갖는 복합적층판의 탄성좌굴거동 분석을 위해 경계조건, 폭-두께비 변화에 대하여 매개변수 해석을 수행하였다. 본 연구의 그래프와 좌굴모드는 임베디드된 사각형 층간분리를 갖는 복합적층판의 설계에 매우 유용한 자료가 될 것으로 사료된다.

• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1706-1713
• /
• 2020

Functionally gradient material (FGM) is promisingly effective in mitigating the thermal stress between plasma facing materials (PFM) and structural materials. However, the corresponding research with respect to W/V FGM has not been reported yet. In this work, we firstly report the successful fabrication of W/V FGM by a combined technology of mechanical alloying (MA) and spark plasma sintering (SPS). The microhardness and microstructure of the consolidated sample were both investigated. W/V stacks show significantly enhanced microhardness (>100%) compared with pure W plate, which is beneficial to the integral strength of the hybrid structure. Furthermore, we clarify that the different ductility of W and V should be carefully considered, otherwise W/V powder might aggregate and lead to the formation of compositional segregation, and simultaneously unmask the impact of V proportion on the distribution of second phase in W-V binary alloy system. This work provides an innovative approach for obtaining W-V connections with much better performance.

• 한국지구과학회지
• /
• 제23권2호
• /
• pp.194-206
• /
• 2002

This article describes the major themes to change in historical and philosophical perspectives of science education that lead the US and Korean science curriculum reform movements since 1957. Inquiry teaching and criticism of teaching science as inquiry in the late 1950s and the 1960s, Science-Technology-Society (STS) Curricula, and Science Literacy and the 1980s science literacy crisis are discussed. In the US, three major curricular projects as responses to the scientific literacy crisis are exemplary such as the Project 2061 sponsored by the American Association for the Advancement of Science, the Project on Scope, Sequence, and Coordination (SS&C) initiated by the National Science Teachers Association (NSTA), and the National Science Education Standards (NSES) published by the National Research Council. To identify how each set of national content standards differ, we compared specific content standards related to the theory of plate tectonics in Earth and Space science in grades 9-12 over the three national standards: Benchmarks of AAAS, NSES of the NRC, and SS&C of the NSTA. Against this historical background of the US science education reform movements, the curriculum reform movements in Korea is briefly discussed. In general, Korean science curriculum reform movements have reflected and resembled the recommendations of the US reform movements. In addition, it is important to note that throughout the history of curriculum revision in Korea, there have been continuing pendulum swings between a theoretical, discipline-centered curriculum and a liberal, humanistic, and student-centered curriculum, which pays more attention to students in terms of their interest and psychological preparedness. In conclusion, the sixth and seventh national science curriculum revisions reflect rather a student-centered movement by reducing technical and sophisticated topics, taking constructivism learning theory into consideration, and adding more STS related topics.

• 한국수산과학회지
• /
• 제50권2호
• /
• pp.120-129
• /
• 2017

This study assessed the safety of raw oysters Crassostrea gigas for consumption during processing in a processing plant. Bacterial contamination (e.g., viable cell counts, coliform groups, Escherichia. coli and pathogenic bacteria) and chemical contamination (e.g., heavy metals and shellfish toxins) were measured on raw oysters, a processing equipment, employees and work areas. No total mercury, lead, paralytic shellfish poison, diarrheic shellfish poison or norovirus was detected in any post-harvested oyster samples. However, the cadmium level ranged from 0.1-0.2 mg/kg. The viable cell count, E. coli and coliform group levels in post-harvested oysters ranged from 4.00-4.54 log CFU/g, ND-210 MPN/100 g and 110-410 MPN/100 g, respectively. The viable contaminating cell counts on employees, equipment and work areas were in the range of $0.90-3.46log\;CFU/100cm^2$. Airborne bacteria in the work areas ranged from 0.60 to 1.81 log CFU/plate/15 min. Thus, no significant health risks were detected in the processing plant.

• 한국지진공학회논문집
• /
• 제5권5호
• /
• pp.35-45
• /
• 2001

최근에 넓은 공간이 요구되는 건축물에서는 칸막이 벽과 같은 비구조재의 사용이 감소됨으로써 감쇠효과가 크게 줄어들고 있으며 고강도재료의 사용으로 바닥판 구조물이 유연화, 장경간화 되어가고 있다. 대형집회공간, 쇼핑몰, 사무실 등과 같이 장경간 건축물에서는 사람의 움직임에 의하여 과도한 진동이 발생할 수 있으며 이러한 진동은 건축물의 사용성을 크게 저하시키는 원인이 되고 있다. 바닥판 진동의 주요 진동원 중의 하나가 보행하중이다. 보행하중을 받는 구조물의 진동해석에 있어서 보행하중을 적용하는 일반적인 방법은 한 절점에 보행하중을 연속적으로 가하거나 주기하중으로 이상화된 동적하중을 가하는 것이다. 그러나 이러한 방법은 보행의 이동효과를 고려할 수 없다. 본 논문에서는 실제 바닥판 구조물의 고유진동수와 감쇠비를 평가하였으며 예제 구조물의 효율적인 진동해석을 위하여 보행하중을 적용하였다.