• Journal of the Korean Operations Research and Management Science Society
• /
• v.16 no.2
• /
• pp.125-125
• /
• 1991

This paper presents a framework for the hierarchical PPC(Production Planning and Control) in make-to-order environment with job shop. The characteristics of the environment are described as : 1) project with non-repetitive and individual production, 2) short delivery date, 3) process layout with large scales manufacturing. 4) job shops. The PPC in a make-to-order typically are organized along hierarchical fashions. A model is proposed for the hierarchical job shop scheduling based on new concepts of production system, work and worker organization. Then, a new integrated hierarchical framework is also developed for the PPC based on concepts of the proposed job shops scheduling model. Finally, the proposed framework has been implemented in the Electric Motor Manufacturing and the results showed good performance.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 1991.09a
• /
• pp.29-40
• /
• 1991

The purpose of this study is invested, recorded about traditional dwelling space, and there is to find out possibilites on the context of the inheritance of traditional life through analzing about life content and space. The results of this study are as follows: 1) Kwang Duk vililage is the typical traditional town where the confucian view of life still affects on overall housing life. 2) The pattern of layout is mainly 'ㅡ' and 'ㄱ' shaped type. In the plane and structural form, the original form is, though some parts have changed, maintained. 3) According to the analysis of transformation state of dwelling space, the category of transformation is summerized as follow ; changes of room function, increase and decrease of annex, and room size by changes of family structure, life style, farming operation style.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.167-172
• /
• 2009

The purpose of this study is examine the characteristics of public open space in the office buildings located in urban commercial strip, in terms of its relationships to street, to building, and to order surrounding facilities. Theoretical basis of this research is that public outdoor spaces are to be the intermediate territory set between streets and a buildings. 5 commercial buildings in Seoul are selected as sample cases and they were closely analyzed in a comparative manner. Based on this comparison, several planning guidelines are suggested for the activation of the space, mainly in terms of the location of public open space in relation to street, the design techniques and devises reflecting the purpose of the space, and territorial arrangement and furniture layout, and the patterns of relationship to surrounding space and facilities.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.3
• /
• pp.183-189
• /
• 2010

In this paper, the trench gate emitter switched thyristor(EST) withl trench gate electrode is proposed for improving snap-back effect which leads to a lot of problems in device applications. The parasitic thyristor which is inherent in the conventional EST is completely eliminated in this structure, allowing higher maximum controllable current densities for ESTs. The dual trench gate allows homogenous current distribution in the EST and preserves the unique feature of the gate controlled current saturation of the thyristor current. The characteristics of the 1700 V forward blocking EST obtained from two-dimensional numerical simulations (MEDICI) is described and compared with that of a conventional EST. we carried out layout, design and process of EST devices.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.37-40
• /
• 2006

Wind tunnel testings to develope tilt-rotor Smart Unmanned Aerial Vehicle (SUAV) were intensively performed. Small wind tunnel was used to find and evaluate design parameters and to fix general layout of configuration. The application of large tunnel with 40% scaled model is to collect performance and stability related aerodynamic data. During large scale model test wind tunnel is used as a tool to compare Flaperon types, to improve lift characteristics by using different height vortex generators and to alleviate nacelle separated flow effects on the wing.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.2
• /
• pp.102-106
• /
• 2005

A low dark current CMOS image sensor (CIS) pixel without any process modification is developed. Dark current is mainly generated at the interface region of shallow trench isolation (STI) structure. Proposed pixel reduces the dark current effectively by separating the STI region from the photodiode junction using simple layout modification. Test sensor array that has both proposed and conventional pixels is fabricated using 0.18 m CMOS process and the characteristics of the sensor are measured. The result shows that the dark current of the proposed pixel is 0.93fA/pixel that is two times lower than the conventional design.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.688-694
• /
• 2001

The 84m discharge line of moisture separator reheater(MSR) in Kori-2 had been suffered by excessive vibration from the beginning of power generation. In 1993, a complementary measure was taken to reduce the vibration level by adding several supports in the MSR pipeline. However, the piping vibration was beyond the allowable limit and an appropriate countermeasure was required to prevent the fatigue failure of the pipeline from the abnormal vibration. In this study, the vibrational characteristics of MSR pipeline and the countermeasure for abnormal vibration was investigated. Among the several vibration reduction methods, piping layout change by smoothing the pipeline was applied to the MSR pipeline in Kori-2. Applying the countermeasure, the vibration level was found to dramatically reduce from 17cm/sec to l.0cm/sec at the full-power operation condition.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.361.2-361
• /
• 2002

Substructures position is considered as design parameter to obtain optimal structural changes to raise its dynamic characteristics. In conventional SDM (structural dynamics modification) method, the layout of modifying substructures position is first fixed and at that condition the structural optimization is performed by using the substructures size and/or material property as design parameters. But in this paper as a design variable substructures global translational and rotational position is treated. (omitted)

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.895-898
• /
• 1999

Recently, small signal modeling of CMOS device becomes more difficult because the design rule goes into deep submicron. De-embedding of substrate parameters is important in order to use CMOS devices at RF frequencies. In this paper, we suggest a new de-embedding model with refined physical meaning and accuracy. In GaAs IC’s, the substrate is almost an insulator but Si substrate has the semiconducting characteristics. It offers some troubles if it is treated like GaAs substrate. The conducting substrate is modeled with five resistances, which leads to very accurate modeling so long as the pad layout is symmetrical. Frequency range is up to 39㎓ and fitting accuracy is as small as 0.00037 on least square errors.

• Journal of Power System Engineering
• /
• v.12 no.5
• /
• pp.14-19
• /
• 2008

In order to meet stringent future emission regulations, especially to reduce Particulate Matter (PM) and NOX, stoichiometric diesel combustion technology with a piezo group-hole nozzle injector is being researched for reduction harmful emissions. A new nozzle layout, namely a group-hole nozzle, which has one group of small orifices with a wide spray included angle was investigated to improve the efficiency of stoichiometric diesel combustion. From this point of view, the group-hole nozzle suggested by Dense Co. is an attractive candidate method applicable to stoichiometric diesel combustion. The group-hole nozzle concept is to reduce the injector nozzle hole diameters without sacrificing spray penetration by closely locating two holes. Experimental studies have proven that the spray from group-hole nozzles have similar spray penetration to that of a single hole with equivalent overall nozzle hole area, but the spray drop sizes (SMD) are reduced, aiding vaporization and mixing.