• E2M - 전기 전자와 첨단 소재
• /
• 제8권6호
• /
• pp.780-786
• /
• 1995

For the execution of RIETAN program adopting Rietveld Analysis Method, the sample superconductor is made according to the solid state synthesis method at 920.deg. C for 24hrs, and was examined for the optimization of parameters needed to analyze Rietveld method with the input of the measured pattern data after measuring the pattern resulted from the X-ray diffraction. It was proven that the lattice constant of the superconductor which was consisted of Pmmm orthorhombic crystal structure in the analyzed space group correspond to the presented theoretical lattice constant a=3.8887(8).angs., b=3.8238(4).angs., c=11.7079.angs.. Therefore, it was examined and confin-ned that the R factor, which was compensated after analyzing the structure of superconductor resulted from this experimented data with the computer simulation, was refined to $R_{wp}$=8.83[%], $R_{P}$=6.47[%], $R_{I}$=10.08[%], $R_{F}$=7.19[%], $R_{E}$=3.76[%]. On the basis of these experimental data, the significant parameter such as the scale factor(S) and the zero point shift(Z) and FWHM value(U,V,W) were optimized as follows; S=2.0827E-3, Z=0.2146, U=4.2761E-2, V=1.7983E-2, and W=2.6768E-2.2.2.2.2.2.

• 스마트미디어저널
• /
• 제12권2호
• /
• pp.76-82
• /
• 2023

제4차 산업혁명시대에 P2P 네트워크를 통해 데이터를 분산하여 관리하는 기술인 블록체인은 제조, 문화, 공공 분야 등 다양한 분야에서 탈중앙형의 새로운 네트워킹 패러다임으로써 활용되고 있다. 하지만, 양자 컴퓨터의 등장과 함께 해시 함수, 대칭키 암호, 공개키 암호 등 기존 암호 체계의 문제를 해결할 수 있는 양자 알고리즘이 소개가 되었다. 현재 주요 블록체인 시스템은 대부분 트랜잭션 서명에 타원곡선 암호를 사용하고 있어 양자 공격자로부터 안전하지 않다. 따라서, 블록체인에서 트랜잭션 서명을 위해 격자 기반 암호를 활용하는 양자 내성 블록체인에 대한 연구가 필요하다. 본 논문에서는 양자 내성을 갖는 격자 기반 암호를 활용하여 서명할 내용을 숨겨 서명할 뿐만 아니라, 추후 서명 내용이 검증 가능한 블록체인을 위한 블라인드 서명 기법을 제안한다. 또한, 랜덤 오라클 모델을 이용하여 제안한 기법의 보안성을 검증한다.

• 한국분말재료학회지
• /
• 제30권2호
• /
• pp.146-155
• /
• 2023

The Ti-6Al-4V lattice structure is widely used in the aerospace industry owing to its high specific strength, specific stiffness, and energy absorption. The quality, performance, and surface roughness of the additively manufactured parts are significantly dependent on various process parameters. Therefore, it is important to study process parameter optimization for relative density and surface roughness control. Here, the part density and surface roughness are examined according to the hatching space, laser power, and scan rotation during laser-powder bed fusion (LPBF), and the optimal process parameters for LPBF are investigated. It has high density and low surface roughness in the specific process parameter ranges of hatching space (0.06-0.12 mm), laser power (225-325 W), and scan rotation (15°). In addition, to investigate the compressive behavior of the lattice structure, a finite element analysis is performed based on the homogenization method. Finite element analysis using the homogenization method indicates that the number of elements decreases from 437,710 to 27 and the analysis time decreases from 3,360 to 9 s. In addition, to verify the reliability of this method, stress-strain data from the compression test and analysis are compared.

• 한국데이타베이스학회:학술대회논문집
• /
• 한국데이타베이스학회 2000년도 추계학술대회 E-Business와 정보보안
• /
• pp.119-123
• /
• 2000

In this note, we study recent results concerning simplicity and spatiality of involutive quantales from the algebraic point of view. When S is a sup-lattice (with a duality), Q(S)$\times$Q( $S^{op}$ ) (Q(S)) is an involutive quantale. Using this, some characterizations of simplicity and spatiality of involutive quantales are investigated.

• Journal of the Optical Society of Korea
• /
• 제6권4호
• /
• pp.172-179
• /
• 2002

Like the conventional digital storage systems, volume holographic memory can be deteriorated by burst errors due to its high-density storage characteristics. These burst errors are used byoptical defects such as scratches, dust particles, etc. and are two-dimensional in a data page. To deal with these errors, we introduce some concepts for describing them and propose efficient two- dimensional interleaving schemes. The schemes are two-dimensional lattices of an error-correction code word and have equilateral triangular and square structures. Using these structures, we can minimize the number of code words that are interleaved and improve the efficiency of the system. For large size burst errors, the efficient interleaving structure is an equilateral triangular lattice. However, for some small size burst errors, it is reduced to a square lattice.

• Bulletin of the Korean Chemical Society
• /
• 제30권9호
• /
• pp.2001-2006
• /
• 2009

Temperature dependence of the critical micelle concentration (CMC), $x_{CMC}$, in micellization can be described by ln $x_{CMC}$ = A + BT + C lnT + D/T, which has been derived statistical-mechanically. Here A, B, C, and D are fitting parameters. The equation fits the CMC data better than conventionally used polynomial equations of temperature. Moreover, it yields the unique(exponent) value of 2 when the CMC is expressed in a power-law form. This finding is quite significant, because it may point to the universality of the thermal behavior of CMC. Hence, in this article, the nature of the equation ln $x_{CMC}$ = A + BT + C lnT + D/T is examined from a lattice-theory point of view through the Flory-Huggins model. It is found that a linear behavior of heat capacity change of micellization is responsible for the CMC equation of temperature.

• 한국강구조학회 논문집
• /
• 제10권4호통권37호
• /
• pp.769-777
• /
• 1998

본 연구의 목적은 삼각형네트워크를 갖는 핀접합 단층래티스돔이 형상초기부정을 가질 경우 하중상태에 따라 좌굴특성에 미치는 영향을 검토하는 것이다. 또한 형상초기부정을 고려하는 단층래티스돔의 일반화 좌굴내력식의 개발을 위한 기초자료를 수집하는데 있다. 해석은 유한요소법에 의한 이산화해석법을 이용했다.

• 품질경영학회지
• /
• 제26권4호
• /
• pp.143-150
• /
• 1998

We propose an adaptive monitoring a, pp.oach for serially correlated data. This algorithm uses the adaptive linear prediction lattice filter (ALPLF) which makes it compute process parameters in real time and recursively update their estimates. It involves computation of the forward and backward prediction errors. CUSUM control charts are a, pp.ied to prediction errors simulaneously in both directions as an omnibus method for detecting changes in process parameters. Results of computer simulations demonstrate that the proposed adaptive monitoring a, pp.oach has great potentials for real-time industrial a, pp.ications, which vary frequently in their control environment.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.414-419
• /
• 2007

This paper describes the prediction of aerodynamic performance and wake of HAWT in normal and yawed flow operation using potential based methods. In order to analyze aerodynamic performance of wind turbine WINFAS program is used, which is based on VLM(Vortex Lattice Method) and CVC(Constant vorticity contour) Free wake model. Some problems of CVC vortex filament method are investigated arid to improve these problems vortex ring wake are introduced in behalf of CVC vortex filament. The prediction results using the vortex lattice wake are compared to experimental data.

• 대한의용생체공학회:의공학회지
• /
• 제15권1호
• /
• pp.51-56
• /
• 1994

Protein adsorption on the polyurethane surface was modelled by a modified random sequential adsorption(RSA) process. In this model, polyurethane surface was modelled as a mixed domain of hydrophobic and hydrophilic parts which was implemented by a 2 dimensional $150{\times}150$ lattice in the computer. Protein adsorption was simulated using a small box which represents a particle of the protein, and polyurethane lattice by considering their hydrophobic interaction. In order to validate the model, we perfonned fibrinogen adsorption on polyurethane surface. Isotherms of the adsorbed protein were calculated and compared to the experimental data. The protein adsorption on the polyurethane surface could be well described using this computer model.