• Structural Engineering and Mechanics
• /
• 제65권4호
• /
• pp.369-380
• /
• 2018

In this paper, a multi-layered finite element model for laminated glass plates is introduced. A layer-wise theory is applied to the analysis of laminated glass due to the combination of stiff and soft layers; the independent layers are connected via Lagrange multipliers. The von $K{\acute{a}}rm{\acute{a}}n$ large deflection plate theory and the constant Poisson ratio for constitutive equations are assumed to capture the possible effects of geometric nonlinearity and the time/temperature-dependent response of the plastic foil. The linear viscoelastic behavior of a polymer foil is included by the generalized Maxwell model. The proposed layer-wise model was implemented into the MATLAB code and verified against detailed three-dimensional models in ADINA solver using different hexahedral finite elements. The effects of temperature, load duration, and creep/relaxation are demonstrated by examples.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.703-709
• /
• 2001

In this paper, we analyzed the laminated composite sandwich plate structure of truss core with changing values of the designing parameters. As a result, in designing parameters of that, the more height and thickness of the laminated composite plate's core, the more increase of natural frequency. In this type of structure, in the case of applying core of the laminated composite plate and antisymmetric stacking, natural frequency has high value and we calculated the optimum angle-ply making natural frequency maximum. Natural frequency of CFRP is higher than that of GFRP. Both are materials of the laminated composite plate. The mode shapes are various along with the angle-ply of the laminated composite plate.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.616-622
• /
• 2001

In this paper, we analyzed the laminated composite sandwich plate structure of honeycomb core with changing values of the designing parameters. As a result, in designing parameters of that, the more height and thickness of the laminated composite plate's core, the more increase of natural frequency. The laminated angle has the maximum value when the plate of honeycomb core is join to opposite direction. This paper shows that the natural frequency of CFRP is higher than that of GFRP, and also impact strength marks maximum value in case of antisymmetry than symmetry of core. Also it shows that the mode shapes are various along with the angle-ply of laminated composite plate.

• Coupled systems mechanics
• /
• 제12권6호
• /
• pp.519-530
• /
• 2023

This paper presents a mathematical model suitable for the calculation of laminated glass, i.e. glass plates combined with an interlayer material. The model is based on a beam differential equation for each glass plate and a separate differential equation for the slip in the interlayer. In addition to slip, the model takes into account prestressing force in the interlayer. It is possible to combine the two contributions arbitrarily, which is important because the glass sheet fabrication process changes the stiffness of the interlayer in ways that are not easily predictable and could introduce prestressing of varying magnitude. The model is suitable for reformulation into an inverse procedure for calculation of the relevant parameters. Model consisting of a system of differential-algebraic equations, proved too stiff for cases with the thin interlayer. This novel approach covers the full range of possible stiffnesses of layered glass sheets, i.e., from zero to infinite stiffness of the interlayer. The comparison of numerical and experimental results contributes to the validation of the model.

• Advances in Computational Design
• /
• 제7권3호
• /
• pp.173-188
• /
• 2022

In modern buildings, glass is considered a structurally unsafe material due to its brittleness and unpredictable failure behavior. The possible use of structural glass elements (i.e., floors, beams and columns) is generally prevented by its poor tensile strength and a frequent occurrence of brittle failures. In this study an innovative modelling based on an equivalent thickness concept of laminated glass beam reinforced with FRP (Fiber Reinforced Polymer) composite material and of glass plates punched is presented. In particular, the novel numerical modelling applied to an embedding Carbon FRP-rod in the interlayer of a laminated structural glass beam is considered in order to increase both its failure strength, together with its post-failure strength and ductility. The proposed equivalent modelling of different specimens enables us to carefully evaluate the effects of this reinforcement. Both the responses of the reinforced beam and un-reinforced one are evaluated, and the corresponding results are compared and discussed. A novel equivalent modelling for reinforced glass beams using FRP composites is presented for FEM analyses in modern material components and proved estimations of the expected performance are provided. Moreover, the new suggested numerical analysis is also applied to laminated glass plates with wide holes at both ends for the technological reasons necessary to connect a glass beam to a structure. Obtained results are compared with an integer specimen. Experimental considerations are reported.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.89-92
• /
• 2002

Traditionally unidirectional laminated composite which are characterized by high specific stiffness and strength were used for structural application. But theses composites are highly susceptible to impact damage because of lower transverse tensile strength. The main failure modes of laminated composite are fiber breakage, matrix cracking and delamination for low velocity impact. The modified failure criterions are implemented to predict these failure modes with finite element analysis. Failure behavior of the woven fabric laminated composite which is used in forehead part of subway to lighten weigh has been studied. The new failure criterions are in good agreement with experimental results and can predict the failure behavior of the woven fabric composite plate subjected to low velocity impact more accurately.

• Journal of the Korean Wood Science and Technology
• /
• 제42권3호
• /
• pp.282-289
• /
• 2014

합판과 유리섬유강화플라스틱을 조합하여 적층 후 $1.96N/mm^2$의 압력으로 $150^{\circ}C$에서 1시간 고밀화시킨 유리섬유 강화플라스틱 적층판을 제작하였다. 제작된 5가지의 유리섬유강화플라스틱 적층판을 각각 기둥재와 접하는 집성재에 부착하여 부분보강보부재를 제작하였다. 더불어 합판과 시트형 유리섬유강화플라스틱을 적층한 보강적층목재핀과 유리섬유로 보강한 원통형 단판적층기둥재로 기둥-보 접합부를 제작하였다. 기준시험편으로는 원주목과 집성재로 제작한 보부재, 드리프트핀을 사용한 접합부를 제작하여 모멘트 저항 내력을 평가하였다. 시험결과 기준시험편과 비교하여 부분보강보부재를 사용한 시험체들이 평균 1.8배 높은 내력성능이 측정되었다. 모든 부분보강보부재와 원통형 단판적층기둥재에는 파단이 발생하지 않았으며 접합부의 인성과 강성이 모두 양호하게 측정되었다. 부분보강보부재의 보강효과는 시트형 유리섬유강화플라스틱이 직물형 유리섬유강화플라스틱으로 보강한 적층판보다 양호한 보강효과를 보였으며, 시트형 유리섬유강화플라스틱을 각층에 삽입한 적층판이 접합내력과 변형각 모두 양호하여 보부재의 부분보강에 적합한 것을 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제42권5호
• /
• pp.571-578
• /
• 2014

As a way of developing wooden joint development, a glass fiber reinforced wood plate was manufactured to replace a steel plate. Also, the fracture toughness was evaluated. Through application to a cantilever-type specimen made of a column and a beam, the moment resistance performance was evaluated. For the fracture toughness specimen of the wood plate, 12 types were manufactured by varying the combination of a main member (veneer and plywood) and reinforcement (glass fiber sheet and glass fiber cloth). The results of the fracture toughness test indicated that the 5% yield load of the specimen using plywood was 18% higher than that of the specimen using veneer, and that the specimen reinforced by inserting glass fiber sheets between testing materials (Type-3-PS) had the highest average 5% yield load 4841 N. Thus, a moment resistance strength test was performed by applying Type-3-PS to a column-beam joint. The results of the test indicated that compared to the specimen using a steel plate and a drift pin (Type-A), the maximum moment ratio of the specimen using a glass fiber reinforced wood plate (Type-3-PS) and a drift pin (Type-B) was 0.79; and that a rupture occurred in the wood plate due to high stiffness of the drift pin. The maximum moment ratio of the specimen using a glass fiber reinforced wood plate (Type-3-PS) and a glass fiber reinforced wooden laminated pin (Type-C) was 0.67, which showed low performance. However, unlike Type-A, a ductile fracture occurred on Type-C, and the load gradually decreased even after the maximum moment.

• Journal of the Korean Wood Science and Technology
• /
• 제42권3호
• /
• pp.258-265
• /
• 2014

목구조물 접합부에 기존 드리프트핀(Drift pin)을 대체하고자 단판이나 합판을 유리섬유강화플라스틱(GFRP: Glass fiber reinforced plastic)과 복합 적층시킨 GFRP보강적층목재핀을 제작하였다. 더불어 GFRP보강적층목재핀을 사용하여 집성재 접합부의 인장형 전단내력 시험을 실시하였다. GFRP 배열에 따른 보강적층목재핀의 휨강도 시험결과 GFRP를 각층에 1장씩 삽입한 시험편(Type-A)이 가장 양호한 성능을 발휘하였다. 또한 압체압력 $1.96N/mm^2$, 온도 $150^{\circ}C$에서 한 시간 열압하여 고밀화한 시험편이 고밀화하지 않은 시험편과 비교하여 휨강도 성능이 1.57배 향상됨을 확인하였으며, 하중방향에 따라 Edgewise가 Flatwise보다 3.51배 높은 성능을 발휘하였다. 시험을 통해 가장 양호한 성능을 보인 Type-A 보강적층목재핀을 이용하여 전단내력 시험을 실시하였다. 접합구의 종류와 접합판의 종류를 달리하여 시험한 결과 드리프트핀과 강판을 적용한 시험체(Type-DS)와 비교하여 GFRP보강적층목재핀과 GFRP보강목재적층판을 적용한 시험체(Type-WL)가 1.12배 높은 전단내력이 측정되었으며 최대하중 이후에도 매우 양호한 인성이 관찰되었다.

• Structural Engineering and Mechanics
• /
• 제57권1호
• /
• pp.105-126
• /
• 2016

In the present study, modelling and vibration control of axially moving laminated Carbon nanotubes/fiber/polymer composite (CNTFPC) plate under initial tension are investigated. Orthotropic visco-Pasternak foundation is developed to consider the influences of orthotropy angle, damping coefficient, normal and shear modulus. The governing equations of the laminated CNTFPC plates are derived based on new form of first-order shear deformation plate theory (FSDT) which is simpler than the conventional one due to reducing the number of unknowns and governing equations, and significantly, it does not require a shear correction factor. Halpin-Tsai model is utilized to evaluate the material properties of two-phase composite consist of uniformly distributed and randomly oriented CNTs through the epoxy resin matrix. Afterwards, the structural properties of CNT reinforced polymer matrix which is assumed as a new matrix and then reinforced with E-Glass fiber are calculated by fiber micromechanics approach. Employing Hamilton's principle, the equations of motion are obtained and solved by Hybrid analytical numerical method. Results indicate that the critical speed of moving laminated CNTFPC plate can be improved by adding appropriate values of CNTs. These findings can be used in design and manufacturing of marine vessels and aircrafts.