• Macromolecular Research
• /
• 제16권3호
• /
• pp.231-237
• /
• 2008

Biodegradable poly($\varepsilon$-caprolactone-co-L-lactide)-b-poly(ethylene glycol) (PCLA-b-PEG) copolymers were synthesized via solution polymerization by varying the feed composition of $\varepsilon$-caprolactone ($\varepsilon$-CL) and L-lactide (LLA) ($\varepsilon$-CL: LLA= 10:0, 7:3, 5:5, 3:7, 0: 10). The feed ratio based on weight is in accordance with the copolymer composition except for the case of $\varepsilon$-CL: LLA=3:7 (C3L7), which was verified by $^1H$-NMR. Two different approaches were used for the exceptional case, which is an extension of the reaction time or the sequential introduction of the monomer. A copolymer composition of $\varepsilon$-CL: LLA=3:7 could be obtained in either case. The chemical microstructure of PCLA-b-PEG was determined using the $^{13}C$-NMR spectra and the effect of the sequential structure on the thermal properties and crystallinity were examined. Despite the same composition ratio of the copolymer, the microstructure can differ according to the reaction conditions.

• 청정기술
• /
• 제12권2호
• /
• pp.53-61
• /
• 2006

생분해성 고분자인 Poly(lactide-co-glycolide) (PLGA)와 약물 단백질로 약물 중합체를 만들기 위하여 초임계 나노 입자 제조 공정중 하나인 PGSS법을 이용하여 연구를 수행하였다. 초임계 이산화탄소에 의해서 고분자 PLGA의 유리전이온도($T_g$)를 강하시켜 가소화시키면서 단백질을 용기 내에서 혼합하였다. 고분자 PLGA에 캡슐화 된 단백질의 입자를 얻기 위해 고압 용기에 들어있는 시료를 노즐을 통하여 대기압으로 이산화탄소를 분사시켰다. 입자의 형태, 입자 크기 그리고 크기 분포에 대한 영향을 알아보기 위해서 고압 용기 안에서 초임계 이산화탄소를 이용하여 공정변수들을 조작함으로서 PGSS 실험을 하였다. 입자는 거칠고 불규칙하며 표면에 기공이 생성되었음을 확인하였다. 제조된 입자의 크기와 크기분포는 과포화도, 핵 생성시간 등으로 설명하였다. 제조된 입자 내의 protein의 활성도 저하는 거의 없었다.

• 폴리머
• /
• 제30권1호
• /
• pp.28-34
• /
• 2006

메톡시폴리에틸렌글리콜(MPEG)과 카프로락톤(CL)과 L-락타이드(LA)로 구성된 MPEG-PCLA 블록공중합체의 단량체를 다양한 비율로 $Sn(Oct)_2$의 존재 하에서 개환중합을 통해 합성하였다. MPEG-PCLA 블록공중합체의 특성은 $^1H-NMR$, GPC, DSC 그리고 XRD를 이용하여 결정하였다. 동역학적 변화를 측정하기 위하여 $Sn(Oct)_2$의 존재 하에서 MPEG-PCLA 블록공중합체의 중합 시 중합시간, 온도, 첨가하는 촉매의 양을 달리하면서 중합을 실시하였다. 그 결과 $110\;^{\circ}C$의 중합온도와 첨가하는 촉매의 양은 개시제 대비 1.2배의 경우에서 가장 높은 중합률을 보였다. 또한 합성된 블록공중합체의 수용액상에서의 시간에 따른 생분해 거동은 GPC를 이용한 분자량 분포의 비교를 통해 측정하였다. 합성된 블록공중합체의 생분해 거동을 측정한 결과 MPEG-PCLA 블록공중합체의 L-락타이드 함량이 증가할수록 생분해성도 증가하는 것을 확인하였다. 본 연구를 통해 MPEG-PCLA 블록공중합체의 $Sn(Oct)_2$의 존재 하에서 개환중합을 실시함에 있어 다양한 중합조건에 따른 중합속도를 확인하였으며 MPEG-PCLA 블록공중합체는 PCLA 블록의 PCL 대비 PLA의 함량 비율에 따라 생분해 기간을 조절할 수 있는 가능성을 확인하였다.

• 폴리머
• /
• 제36권2호
• /
• pp.124-130
• /
• 2012

본 연구의 목적은 전기방사법을 사용하여 poly(L-lactide-$co$-${\varepsilon}$-caprolactone) (PLCL)과 marine collagen (MC)이 혼합된 나노섬유를 제조하는 것이다. 전기방사된 나노섬유의 직경과 형태는 여러 공정 변수에 의해서 변화되는데, PLCL과 MC의 혼합비, 노즐과 콜렉터와의 거리, 노즐의 직경, 용액의 방출 속도 그리고 전기장의 세기 변화에 따라 나노파이버의 직경을 주사전자현미경을 통해서 분석하였다. 또한 제조된 나노파이버의 표면변화를 확인하기 위해 물과의 접촉각을 측정하였으며, 나노파이버의 세포 친화성을 평가하기 위해 MG-63을 이용하여 생존율과 흡착형태를 주사전자현미경과 형광현미경을 통해서 관찰하였다. 이와 같은 연구 결과, 방사거리, MC의 함량, 전기장의 세기가 증가할수록 제조된 나노파이버의 평균직경은 감소하는 경향을 나타냈다. 또한 MC의 함량이 증가할수록 나노파이버의 친수성이 증가하였고 세포독성은 관찰되지 않았다. 이에 따라 해양유래 생물에서 추출한 콜라겐은 조직공학용 소재에 새롭게 사용될 수 있을 것으로 예상된다.

• 한국당과학회:학술대회논문집
• /
• 한국당과학회 2006년도 제1회 연례학술대회
• /
• pp.57-57
• /
• 2006

• Macromolecular Research
• /
• 제10권2호
• /
• pp.54-59
• /
• 2002

ABA triblock copolymers of L-lactide and trimethylene carbonate with several different compositions were prepared by sequential ring-opening polymerization in the presence of diethylene glycol. Also chain-extension reactions of the resulting copolymers were carried out using hexamethylene diisocyanate to produce relatively high molecular weight polymers, which could be cast into elastomeric tough films. The polymers with certain L-lactide contents were partially crystalline, exhibiting two-phase morphology. The polymer films showed reversible elastic behavior under tensile tension, providing a novel thermoplastic elastomer possessing desirable properties such as biodegradability and good mechanical properties.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.210-211
• /
• 2006

A series of L-LA polymerizations initiated by $Sn(Oct)_{2}\;([LA]_{0}/[Sn]_{0}=200)$ were carried out in scR22 at $130^{\circ}C$ and 300 bar, where $[LA]_{0}$ is the initial L-lactide concentration and $[Sn]_{0}$ is the initial $Sn(Oct)_{2}$ concentration. The reaction time dependences of monomer conversion and PLLA MW improved. The monomer conversion and PLLA MW increased with increasing reaction time. The effect of temperature on monomer conversion and PLLA MW was investigated in a series of polymerizations conducted at temperatures ranging from 90 to $150^{\circ}C$ and at a constant pressure of 200 bar. In all of these experiments, the ratio of monomer to R22 concentration was held constant at 12.4 wt.-%. Increasing the reaction temperature from 90 to $130^{\circ}C$ resulted in increased monomer conversion from 11.5 to 72.2 %.

• Macromolecular Research
• /
• 제14권1호
• /
• pp.59-65
• /
• 2006

We report a new approach to fabricate electrospun polymer nonwoven mats with porous surface morphology by varying the collector temperature during electrospinning. Polymers such as poly(L-lactide) (PLLA), polystyrene (PS), and poly(vinyl acetate) (PVAc) were dissolved in volatile solvents, namely methylene chloride (Me) and tetrahydrofuran (THF), and subjected to electrospinning. The temperature of the collector in the electrospinning device was varied by a heating system. The resulting nonwoven mats were characterized by using scanning electron microscopy (SEM), field emission SEM (FESEM), and atomic force microscopy (AFM). We observed that the surface morphology, porous structure, and the properties such as pore size, depth, shape, and distribution of the nonwoven mats were greatly influenced by the collector temperature.

• Archives of Pharmacal Research
• /
• 제23권4호
• /
• pp.385-390
• /
• 2000

To demonstrate the effect of formulation conditions on the controlled release of protein from poly(lactide-co-glycolide) (PLGA) microspheres for use as a parenteral drug carrier, ovalbumin (OVA) microspheres were prepared using the W/O/W multiple emulsion solvent evaporation and extraction method. Methylene chloride or ethyl acetate was applied as an organic phase and poly(vinyl alcohol) as a secondary emulsion stabilizer. Low loading efficiencies of less than 20％ were observed and the in vitro release of OVA showed a burst effect in all batches of different microspheres, followed by a gradual release over the next 6 weeks. Formulation processes affected the size and morphology, drug content, and the controlled release of OVA from PLGA microspheres.

• Advanced Composite Materials
• /
• 제18권3호
• /
• pp.287-295
• /
• 2009

$\beta$-Tricalcium phosphate ($\beta$-TCP) particles reinforced bioresorbable plastics poly-L-lactide (PLLA) composites were prepared by injection molding. The nominal weight ratio of $\beta$-TCP was selected as 5, 10 and 15%. In order to clarify effects of the PLLA crystallinity on the mechanical properties, the specimens were heat treated isothermally. Results of differential scanning calorimetry indicated that the PLLA crystallinity increased with increasing heat treatment temperature. Bending and compressive tests were conducted on the specimen with different $\beta$-TCP contents and crystallinities. The results show that the bending and compressive moduli increased with increasing $\beta$-TCP contents and crystallinity. On the other hand, bending strength decreased with increasing $\beta$-TCP contents. Maximum bending strength was obtained at the heat treatment of $70^{\circ}C$ for 24 h, whereas compressive 0.2% proof strength increased with increasing heat treatment temperature. This difference is attributed to the difference in the microscopic damages.