• 대한소아치과학회지
• /
• 제32권3호
• /
• pp.525-530
• /
• 2005

정중이개란 상악 중절치 사이의 치간이개를 말한다. 이는 혼합 치열기에서 ugly ducking stage에 흔히 관찰할 수 있으며 일반적으로 견치가 맹출하면서 자연적으로 소실되므로 꼭 치료가 필요한 것은 아니다. 그러나 견치 맹출 후에도 정중이개가 2mm이하로 계속 존재하거나 견치 맹출 전이라도 3mm이상의 정중이개가 존재하는 경우에서는 치료의 적응증이 될 수 있다. 특히 후자의 경우 심미적인 면에서 뿐만 아니라, 이로 인해 측절치와 견치의 맹출공간이 부족해지는 문제가 발생하므로 교정치료가 권장된다. 정중이개 치료시 사용되는 장치물은 finger spring 등을 이용한 가철성 장치물과, 교정용 band, tube, bracket 등을 부착시켜 rubber elastics이나 coil spring 등을 사용하는 고정성 장치물로 나뉘어진다. 그러나 정중이개의 치료를 위해 rubber band를 band, tube, bracket 등과 같은 적절한 부가장치 없이 사용하면 rubber band가 치근은 따라 치은 하방으로 이동하게 되고 치주 인대를 파괴하며 치근단 부위에 이르러 치아동요, 치아정출 및 탈락 등 치아에 치명적인 손상을 입힐 수 있다. 본 증례는 정중이개의 치료를 위해 부적절하게 rubber band를 사용하여 외상을 받은 치아를 관찰하여 다소의 지견을 얻었기에 이를 보고하는 바이다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.583-586
• /
• 2005

In this paper, millimeter-wave monolithic integrated circuit (MIMIC) low noise amplifier (LNA) for V-band, which is applicable to 58 GHz, we designed and fabricated. We fabricated the module using the fabricated LNA chips. The V-band MIMIC LNA was fabricated using the high performance $0.1\;{\mu}\;m$ ${\Gamma}-gate$ pseudomorphic high electron mobility transistor (PHEMT). The MIMIC LNA was designed using active and passive device library, which is composed $0.1\;{\mu}\;m$ ${\Gamma}-gate$ PHEMT and coplanar waveguide (CPW) technology. The designed V-band MIMIC LNA was fabricated using integrated unit processes of active and passive device. Also we fabricated CPW-to-waveguide fin-line transition of WR-15 type for module. The Transmission Line was fabricated using RT Duroid 5880 substrate. The measured results of V-band MIMIC LNA and Module are shown $S_{21}$ gain of 13.1 dB and 8.3 dB at 58 GHz, respectively. The fabricated LNA chip and Module in this work show a good noise figure of 3.6 dB and 5.6 dB at 58 GHz, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.347-347
• /
• 2012

Nickel Oxide (NiO) is a transition metal oxide of the rock salt structure that has a wide band gap of 3.5 eV. It has a variety of specialized applications due to its excellent chemical stability, optical, electrical and magnetic properties. In this study, we concentrated on the application of NiO thin film for transparent conducting oxide. The energy band structure, electronic and optical properties of Nickel Oxide (NiO) thin films grown on Si by using electron beam evaporation were investigated by X-Ray Photoelectron Spectroscopy (XPS), Reflection Electron Energy Loss Spectroscopy (REELS), and UV-Spectrometer. The band gap of NiO thin films determined by REELS spectra was 3.53 eV for the primary energies of 1.5 keV. The valence-band offset (VBO) of NiO thin films investigated by XPS was 3.88 eV and the conduction-band offset (CBO) was 1.59 eV. The UV-spectra analysis showed that the optical transmittance of the NiO thin film was 84% in the visible light region within an error of ${\pm}1%$ and the optical band gap for indirect band gap was 3.53 eV which is well agreement with estimated by REELS. The dielectric function was determined using the REELS spectra in conjunction with the Quantitative Analysis of Electron Energy Loss Spectra (QUEELS)-${\varepsilon}({\kappa},{\omega})$-REELS software. The Energy Loss Function (ELF) appeared at 4.8, 8.2, 22.5, 38.6, and 67.0 eV. The results are in good agreement with the previous study [1]. The transmission coefficient of NiO thin films calculated by QUEELS-REELS was 85% in the visible region, we confirmed that the optical transmittance values obtained with UV-Spectrometer is the same as that of estimated from QUEELS-${\varepsilon}({\kappa},{\omega})$-REELS within uncertainty. The inelastic mean free path (IMFP) estimated from QUEELS-${\varepsilon}({\kappa},{\omega})$-REELS is consistent with the IMFP values determined by the Tanuma-Powell Penn (TPP2M) formula [2]. Our results showed that the IMFP of NiO thin films was increased with increasing primary energies. The quantitative analysis of REELS provides us with a straightforward way to determine the electronic and optical properties of transparent thin film materials.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1601_1602
• /
• 2009

본 논문은 SSN(Simultaneous Switching Noise) 이 유전체를 통해 다른 시스템에 유기되는 것을 막기 위한 방법인 EBG(Electromagnetic Band-Gap)에 관한 연구이다. 이에 대한 EBG 구조를 설계하기 위해 PDN(Power Delivery Network)에 주기적인 패턴을 삽입한다. 패키지에 EBG 구조를 적용하기 위해 인쇄 회로기판 범위에서 연구되었던 구조를 변형 및 개조하여 EBG 구조가 내포하고 있는 필터의 차단 주파수의 범위를 넓히며 차단 시작 주파수를 1GHz 아래로 낮추는 소형화 방법을 모색한다. 이 연구에서 실시할 EBG 구조에 대한 간단한 고찰과 인쇄 회로 기판에 적합한 AI-EBG(Alternating impedance Electromagnetic Band-Gap) 구조를 이용한 EBG 의 소형화에 대해 언급하고, 소형화를 위한 3-D EBG 의 설계구조에 대해 설명한다. 그리고 저주파에서 차단특성을 높이기 위한 방법으로 3-D EBG를 사용하고 AI-EBG와 비교하여 차단특성의 변화를 Full-wave 시뮬레이션과 측정으로서 비교한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.346-349
• /
• 1993

A method for image compression based on decomposition is presented. We design the efficient coding technique for upper band image signals. This coding technique with directive 1-D DPCM is based on the statistical properties of upper bands. Lower band image signals is encoded using 2-D DPCM. The directive 1-D DPCM is performed, scanning upper bands according to edge direction. And then the predicted error signals of upper band sis coded using B1 and Huffman code, and the predicted error signals of lower band is coded using Huffman code. The proposed system shows improved performance when compared with other existing methods with respect to peak signal to noise ratio(PSMR) and human visual system(HVS) properties.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.512-514
• /
• 2007

Even though official G/T for KOMPSAT-2 X-Band downlink acquisition was 32dB/K, KARI performed the data acquisition experiment using 2Am X-Band antenna to check if popular 2Am MODIS receiving antenna can receive KOMPSAT-2 MSC data within acceptable quality level. Through several acquisition tests, it was shown that G/T value of 24dB/K can provide the reliable data BER quality, 10-6 for the above the elevation angle of 10 degree. Some plots for Eb/No versus elevation angle are provided.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.267-267
• /
• 2010

The continuous change in the electronic band structure of metal-adsorbed bilayer graphene was calculated as a function of metal coverage using first-principles calculations. Instead of modifying the unit cell size as a function of metal coverage, the distance between the metal atoms and bilayer graphene in the same $2{\times}2$ unit unit cell was controlled to change the total charges transferred from the metal atoms to bilayer graphene. The validity of the theoretical method was confirmed by reproducing the continuous change in the electronic band structure of K-adsorbed epitaxial bilayer graphene, as shown by Ohta et al. [Science 313, 951 (2006)]. In addition, the changes in the electronic band structures of undoped, n-type, and p-type bilayer graphene were studied schematically as a function of metal coverage using the theoretical method.

• 한국군사과학기술학회지
• /
• 제15권2호
• /
• pp.161-168
• /
• 2012

In this paper, we have experimentally studied on phase characteristics of airborne radome for ELINT directional finding system, because it is difficult to find theoretical solutions for phase error of the radome. Especially, we described the millimeter wave band radome that was fabricated with cyanate-ester material and its thickness was 2mm. We presented the phase error about millimeter band radome. That phase error is about 30 degrees for parallel and perpendicular polarization in the K-Ka band. That is reasonable value for the ELINT directional finding system.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.463-469
• /
• 2016

In this paper, the use of a dual composite right/left-handed coplanar waveguide (CPW) transmission line is proposed for the design of a band rejection filter. The notch property of the filter is achieved by combining the convex signal line with the shorted concave meander line, and the equivalent circuit model is extracted from the geometry of the unit cell for organizing the band rejection property. Then the equivalent parameters of the unit cell are analyzed to identify those behaviors. And the dispersion characteristics and energy distributions are simulated. In the end, the band rejection filter is manufactured by cascading two proposed unit cells. We show that the measurement result for the resonant frequency demonstrates good agreement with the simulation result and the band rejection filter provides a rejection performance of 17.5 dB at the stopband frequency ranging from 869 MHz to 894 MHz.

• 대한물리치료과학회지
• /
• 제4권2호
• /
• pp.453-460
• /
• 1997

This paper reports treatment effect by Thera-Band for two cases of Frozen shoulder. The purpose of study was to introduce treatment effect by Thera-Band for frozen shoulder. Case 1 Total amount of an increase of range of motion of shoulder joint were about 55 degrees in flexion, 60 degrees in abduction and 50 degrees in external rotation and the majority of those improvements were accomplished during three weeks of treatment by Thera-Band. Case 2 Range of motion of shoulder joint were accomplished Normal Range of Motion during one week of treatment by Thera-Band.