• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.308-318
• /
• 2009

The purpose of this study was to develop the functionally improved winter work clothing for the Korean railroad workers. Based on the questionnaires, the sample clothing for the Korean railroad workers was produced. The design, materials, and patterns were modified to increase mobility and comfort of workers. Water-repellent treatment was added to the material in order to decrease the dirt and stains while working. Also the reflective strips were added to chest and back of the upper garment in order to increase visibility and safety of the workers. In terms of the design and pattern underarm of the sleeve and side panel of the bodice were put in together and action pleats at the back were inserted in order to decrease the pullback of the armpit and scapular area and increase mobility of the arm movement. Also the patterns of the elbows areas were modified to increase mobility of joint. The prototype was evaluated an objective assessment and subjective assessment to compare to the existing working uniform. Assessment group was consisted of 5 subject groups and 11 expert groups and evaluated external appearance and adaptability to the movements. According to the results, the prototype was evaluated better than the existing working uniform in appearance and adaptability except height of collar. A field test was conducted to compare the prototype and the existing working uniform. The field tests were performed by 6 workers in the Korean railroad. According to the results, the prototype was improved in terms of adaptability and comfort.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.423-432
• /
• 2017

Objectives: This study was conducted to evaluate asbestos handling history of workers at automobile manufacturing plants in Korea. Methods: National regulations on asbestos and Korea Occupational Safety and Health Agency(KOSHA) database on the information of asbestos containing products were reviewed. We investigated asbestos related materials from one automobile manufacturing plant. Material safety data sheets(MSDS) collected in 2010, work environment monitoring results reported from 2000 to 2013, trade union reports and asbestos survey reports were reviewed. We also interviewed workers with long career and did walk-through survey. Results: The Ministry of Labor in Korea has permitted asbestos manufacturing since 1990. In 1997, the use of crocidolite and amosite asbestos were banned. In 2007, the Korean government announced a total ban on the manufacturing, importation and use of all kinds of asbestos, which took full effect in 2009. A total of 174 asbestos products information from KOSHA database was analyzed. Extruded cement panel for building, special brake for crane farm machinery, gasket, joint sheet and thermal insulator were produced until 2007. From automobile manufacturing plant survey, we confirmed that asbestos containing materials(ACM) such as gasket, heating induction materials have been used until 2011. Asbestos containing building materials(ACBM) such as bamlites, slate and ceiling tex were reported at 122 asbestos dismantling projects in 2014. Conclusion: Although the use of all kinds of asbestos were banned from 2009, ACMs and ACBMs installed before 2009 were still found at automobile manufacturing plant until 2011 and 2014 respectively. In particular, asbestos slates should be managed because most of slates had not been removed until 2014.

• Genomics & Informatics
• /
• v.7 no.1
• /
• pp.20-25
• /
• 2009

Rheumatoid arthritis (RA) is a chronic autoimmune disorder that is characterized by inflammation of the synovial tissue and deterioration of the joint and bone. A recent study reported a potential gene-environment interaction between HLA-DR and smoking. The present study investigated whether a specific gene was related to the association between smoking and the severity of RA (rheumatoid factor levels > 20 IU/ml). We used the resources of the NARAC family collection of GAW 15 databases, and 1139 subjects with RF>20 IU/ml were included in the current analysis. The linkage panel contained 5858 SNP markers, and 5744 SNPs passed quality control criteria. Linear regression analyses, using PLINK software and generalized estimating equation regression models, were used to test for associations between the SNPs and the severity of RA according to smoking groups. Two major findings were established. First, the severity of RA in smokers was associated with rs703618 (p=$6{\times}10^{-5}$), which lies in the intronic region of the stabilin 2 (STAB2) gene on chromosome 12. Second, there were significant differences in the levels of RF between 'ever smokers' and 'never smokers' according to the rs703618 genotype (G/G, A/G, A/A). We investigated whether a specific gene acts as a mediator between smoking and the severity of RA and found that the STAB2 gene could affect this relationship. Our finding indicates that smoking may mediate RA severity by affecting the expression level of a specific gene.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.405-415
• /
• 2011

For the safe seismic design of buildings, it is necessary to predict the plastic deformation demands of the members as well as the story drift ratio. In the present study, a simple method of estimating the beam plastic rotation was developed for special-moment-resisting steel frame structures designed with strong column-weak beam behavior. The proposed method uses elastic analysis rather than nonlinear analysis, which is difficult to use in practice. The beam plastic rotation was directly calculated based on the results of the elastic analysis, addressing the moment redistribution, the column and joint dimensions, the movement of the plastic hinge, the panel zone deformation, the gravity load, and the strain-hardening behavior. In addition, the rocking effect of the braced frame or core wall on the beam plastic rotation was addressed. For verification, the proposed method was applied to a six-story special-moment frame designed with strong column-weak beam behavior. The predicted plastic rotations of the beams were compared with those that were determined via nonlinear analysis. The beam plastic rotations that were predicted using the proposed method correlated well with those that were determined from the nonlinear pushover analysis.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.34 no.2
• /
• pp.16-30
• /
• 2021

Objectives: The aim of this study was to establish a clear diagnostic definition of Sanhupung using the Delphi method. Methods: This study used the Delphi technique. A panel consisting of 21 experts of Korean medicine, particularly in of gynecologic medicine, participated in the Delphi examination that included answering the 4th round survey. The Delphi examination was carried out through evaluating and correcting the questionnaire by e-mail. Results: Through the Delphi survey, we have reached on an agreement regarding the basic concepts, time, cause, essential symptoms, and accessory symptoms of Sanhupung. They are as follows: 1) Sanhupung is a culture bound syndrome reflecting Korea's cultural specificity. 2) Sanhupung can be diagnosed even after the miscarriage. 3) For the diagnosis of Sanhupung, the main cause of symptoms should not be classified as other disease. 4) Sanhupung can be diagnosed based on essential symptoms and accessory symptoms. 5) Essential symptoms include local symptoms such as joint pain at specific areas, partial sensory impairment and general symptoms including pain of all the joints, whole body sensory impairment, increased sweating, feeling of wind coming into the body, worsened symptoms with the cold, intolerance to cold, and pain of all the muscles. Conclusions: The basic concepts and diagnostic definition of Sanhupung were suggested based on the Delphi survey among experts in the field. Further research is necessary to improve reliability and validity of diagnostic definition of Sanhupung in clinical trials.

• Environmental and Resource Economics Review
• /
• v.31 no.4
• /
• pp.887-908
• /
• 2022

In order to confirm the effects of economic growth and environmental improvement, this study analyzed the existence of environmental Kuznets curve (EKC) for SO₂ emission, greenhouse gas emission, and waste generation in OECD countries. As a result of panel analysis, the shape of the EKC were different depending on environmental pollutants. SO₂ generated peaks relatively early in economic growth, and the peak of greenhouse gas emissions was showed in higher income level. But both emissions showed the a complete inverted U-shaped curve decreasing after the peak. On the other hand, for waste, there was no environmental Kuznets curve that could confirm the peak. Therefore, this study confirmed that it is difficult to expect a voluntary reduction in all environmental pollutants, and additional global joint efforts are needed to pass the peak. In particular, since waste has a greater impact on population density and industrial structure than income level, additional policy efforts are needed to reduce generation and create a resource circulation system.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.4
• /
• pp.315-326
• /
• 2024

In this study, the Delphi method and AHP (analytic hierarchy process) were used to evaluate tunnel collapse risk from a comprehensive and multifaceted perspective. Influence factors were established through literature reviews, previous studies, and brainstorming sessions with expert groups, resulting in the construction of five main classification systems. A panel of 21 experts was formed, and three rounds of Delphi surveys were conducted to prevent errors and biases in the expert judgment process, thereby enhancing reliability. Ultimately, 14 influence factors were identified through CVR (content validity ratio) and COV (coefficient of variation) analyses of the experts' responses. Subsequently, the AHP method was applied to assess the relative importance of each influence factor and calculate the final composite weights. The timing of support and reinforcement had the highest priority, followed by groundwater inflow, joint conditions, support pattern levels, and auxiliary methods. These findings help identify the key factors affecting tunnel collapse risk and provide a foundation for developing strategies to improve tunnel safety.

• Journal of Applied Biological Chemistry
• /
• v.59 no.3
• /
• pp.189-201
• /
• 2016

A processing factor (PF) has been used to define the maximum residue limits of pesticide in a variety of processed fruit products. This study summarizes PF by the stage of fruit processing based on JMPR reports from 2010 to 2014. When we compared PF of 19 pesticides in apple products during the processing of washing, drying, canning, juice, sauce, puree and pomace, PF was higher than 1 only in pomace. In the comparison of 21 pesticides during the process of grape (washing, juice, wine and raisin), PF was higher than 1 in raisin. In the comparison of 19 pesticides during the process of orange (juice, oil and marmalade), PF was higher than 1 in oil. When 27 pesticides were compared during the process of tomato (juice, puree and paste), paste showed the highest PF value except pomace. During the process of plum (washing, drying and puree) with 12 pesticides, PF was higher than 1 in drying. The correlation coefficients between physical characteristics of pesticide (fat-solubility and volatility) and PF were statistically significant in the processes of apple juice, orange juice, tomato puree and paste and strawberry jam.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.4
• /
• pp.1693-1697
• /
• 2012

Objective: To explore the effect on radiosensitivity of arsenic trioxide ($As_20_3$) in conjunction with hyperthermia on the esophageal carcinoma EC-1 cell line. Method: Inhibition of EC-1 cell proliferation at different concentrations of $As_20_3$ was assessed using the methyl thiazolyl blue colorimetric method (MTT method), with calculation of $IC_{50}$ value and choice of 20% of the $IC_{50}$ as the experimental drug concentration. Blank control, $As_20_3$, hyperthermia, radiotherapy group, $As_20_3$ + hyperthermia, $As_20_3$ + radiotherapy, hyperthermia + radiotherapy and $As_20_3$ + hyperthermia + radiotherapy groups were established, and the cell survival fraction (SF) was calculated from flat panel colony forming analysis, and fitted by the 'multitarget click mathematical model'. Flow cytometry (FCM) was used to detect changes in cell apoptosis and the cell cycle. Results: $As_20_3$ exerted inhibitory effects on proliferation of esophageal carcinoma EC-1 cells, with an $IC_{50}$ of 18.7 ${\mu}mol/L$. After joint therapy of $As_20_3$ + hyperthermia + radiotherapy, the results of FCM showed that cells could be arrested in the $G_2$/M phase, and as the ratio of cells in $G_0/G_1$ and S phases decreased, cell death became more pronounced. Conclusion: $As_20_3$ and hyperthermia exert radiosensitivity effects on esophageal carcinoma EC-1 cells, with synergy in combination. Mechanistically, $As_20_3$ and hyperthermia mainly influence the cell cycle distribution of EC-1 esophageal carcinoma cells, decreasing the repair of sublethal damage and inducing apoptosis, thereby enhancing the killing effects of radioactive rays.

• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2020

In general, auto parts production assembly line is assembled and produced by automatic mounting by an automated robot. In such a production site, quality problems such as misalignment of parts (doors, trunks, roofs, etc.) to be assembled with the vehicle body or collision between assembly robots and components are often caused. In order to solve such a problem, the quality of parts is manually inspected by using mechanical jig devices outside the automated production line. Automotive inspection technology is the most commonly used field of vision, which includes surface inspection such as mounting hole spacing and defect detection, body panel dents and bends. It is used for guiding, providing location information to the robot controller to adjust the robot's path to improve process productivity and manufacturing flexibility. The most difficult weighing and measuring technology is to calibrate the surface analysis and position and characteristics between parts by storing images of the part to be measured that enters the camera's field of view mounted on the side or top of the part. The problem of the machine vision device applied to the automobile production line is that the lighting conditions inside the factory are severely changed due to various weather changes such as morning-evening, rainy days and sunny days through the exterior window of the assembly production plant. In addition, since the material of the vehicle body parts is a steel sheet, the reflection of light is very severe, which causes a problem in that the quality of the captured image is greatly changed even with a small light change. In this study, the distance between the car body and the door part and the door are acquired by the measuring device combining the laser slit light source and the LED pattern light source. The result is transferred to the joint robot for assembling parts at the optimum position between parts, and the assembly is done at the optimal position by changing the angle and step.