• Journal of Welding and Joining
• /
• v.31 no.3
• /
• pp.76-83
• /
• 2013

This study investigated the effect of bonding temperature and holding time on microstructures and mechanical properties of diffusion bonded joint of Haynes230. The diffusion bonds were performed at the temperature of 950, 1050, and $1150^{\circ}C$ for holding times of 30, 60, 120 and 240 minutes at a pressure of 4MPa under high vacuum condition. The amount of non-bonded area and void observed in the bonded interface decreased with increasing bonding temperature and holding time. Cr-rich precipitates at the linear interface region restrained grain migration at $950^{\circ}C$ and $1050^{\circ}C$. However, the grain migration was observed in spite of short holding time due to the dissolution of precipitates to base metal in the interface region at $1150^{\circ}C$. Three types of the fracture surface were observed after tensile test. The region where the coalesce and migration of grain occurred much showed high fracture load because of base metal fracture whereas the region where those did less due to the precipitates demonstrated low fracture load because of interface fracture. The expected fracture load could be derived with the value of fracture area of base metal ($A_{BF}$) and interface ($A_{IF}$), $Load=201A_{BF}+153A_{IF}$. Based on this equation, strength of base metal and interface fracture were calculated as 201MPa and 153MPa, respectively.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.4
• /
• pp.481-487
• /
• 2002

Currently, the load transfer's mechanism from a beam to a column has yet to ve clarified in a concrete filled steel tubular (CFT) structure with a connection type of an exterior diaphragm. The loads for each floor are transferred to the concrete core from a steel beam through ha contacted face between an in-filled concrete and the interior surface of a steel tube. Thus, a Push-Out test was performed to investigate the load transfer mechanism. A total of 30 samples were tested to confirm the bond stress and/or axial load distribution between a steel tube and in-filled concrete for CFT column. The main parameters considered for this study included concrete type, steel tube-shape/length, and the effect of a weld joint wit ha backing strip for a column splice. Test results were summarized to confirm load transfer behavior between a concrete and steel tube for each experimental parameter, using the analytical approach to verify experimental results.

• Publications of The Korean Astronomical Society
• /
• v.24 no.1
• /
• pp.65-81
• /
• 2009

We present the performance test results of VLBI Correlation Subsystem (VCS) trial product which was being developed for 1 year from August 2007. It is a core component of Korea-Japan Joint VLBI Correlator (KJJVC). The aim for developing VCS trial product is to improve the performance of VCS main product to reduce the efforts and cost, and to solve the design problems by performing the preliminary test of the manufactured trial product. The function of VCS trial product is that it is able to process the 2 stations-1 baseline, 8 Gbps/station speed, 1.2 Gbps output speed with FX-type. VCS trial product consists of Read Data Control Board (RDC), Fourier Transform Board (FTB), and Correlation and Accumulation Board (CAB). Almost main functions are integrated in the FTB and CAB board. In order to confirm the performance of VCS trial product functions, the spectral analysis, delay compensation and correlation processing experiments were carried out by using simulation and real observation data. We found that the overflow problem of re-quantization after FFT processing was occurred in the delay compensation experiment. We confirmed that this problem was caused by valid bit-expression of the re-quantized data. To solve this problem, the novel method will be applied to VCS main product. The effectiveness of VCS trial product has been verified through the preliminary experimental results, but the overflow problem was occurred.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.40-46
• /
• 2020

Safe security technology is required for the startup ecosystem according to the construction and service of a joint open platform in the financial sector. Financial industry standard open API recommends that payment-related fintech companies develop/apply additional security technologies to protect core API authentication keys in the mutual authentication process. This study proposes an enhanced API security protocol using multiple channels. It was designed in consideration of the compatibility of heterogeneous platforms by further analyzing the problems and weaknesses of existing open API related research. I applied the method of concealment to remove the additional security channels into a single channel of the existing security protocols. As a result of the performance analysis, the two-way safety of the communication session of the multi-channel and the security of the man-in-the-middle attack of the enhanced authentication key were confirmed, and the computational performance of the delay time (less than 1 second) in the multi-session was confirmed.

• Korean Journal of Oriental Medicine
• /
• v.9 no.2
• /
• pp.121-130
• /
• 2003

The goal of this study is construction and efficacy evaluation of MPC-25 (Magnetic Pain Control-25), a medical device using magnetic stimulation. MPC-25 consists of a main body containing power supply and control module and a bed containing magnetic core and coil. In distinction from electric pain control medical devices, magnetic pain control system is non-contact, so the patients need not take off their clothes to be treated. High amplitude current pulses are applied to a magnetic coil and induce time varying magnetic field generating eddy current in a conductor like human body. Clinical efficacy test was performed in patients suffering from musculoskeletal pain of lumbar, shoulder and joint. Degree of pain before and after treatment for 30 minutes was compared using Visual Analogous Scale. As a result, 14 cases out of 20 showed decreased pain perception, so the rate of efficacy is 70%. Reduction of pain perception was statistically significant (P=0.001 by Wilcoxon Signed Rank Test).

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.2
• /
• pp.13-25
• /
• 2017

Recently, the high performance of tactical situation display console and tactical data links are used to integrate the operational situations in accordance with information age and NCW (Network Centric Warfare). The tendency to maximize the efficiency of task execution has been developed by sharing information and the state of the battle quickly through complex and diverse information exchange. Tactical data link is a communication system that shares the platform with core components of weapons systems and battlefield situation between the command and control systems to perform a Network Centric Warfare and provides a wide range of tactical data required for decision-making and implementation.It provides the tactical information such as tactical information such as operational information, the identification of the peer, and the target location in real time or near real time in the battlefield situation, and it is operated for the exchange of mass tactical information between the intellectuals by providing common situation recognition and cooperation with joint operations. In this study, still image management, audio file management, tactical screen recording and playback using the storage and playback, NITF (National Imagery Transmission Format) message received from the displayer integrates the tactical situation in three dimensions according to multiple data link operation to suggest ways to ensure data integrity between the data link processor during the entire operation time.

• Korean Security Journal
• /
• no.29
• /
• pp.7-34
• /
• 2011

Achieving high-level technology in fields such as IT-related industry, semiconductors, mobile phones, LCD, automobile, shipbuilding, etc., Korea has become an international market leader in those fields. In results, there are the increasing numbers of technology leakage attempts in various manners. Recently, technology leakages are not limited to illegal industrial espionage, but also occur during usual corporate proceedings such as technology transfer, joint research and M&A. In fact, there was a technology leakage issue in the M&A between Ssangyong Motors of Korea and Shanghai Motors of China. Current M&A regulations of Korea are not independent laws, but are spread over various laws, such as commercial law, Capital Markets and the Financial Investment Services Act, Foreign Trade Act, etc. This paper focuses on whether the current Korean regulations regarding M&A are able to effectively restrict the leakage of major information of corporate during M&A and seeks the complements.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.405-415
• /
• 2011

For the safe seismic design of buildings, it is necessary to predict the plastic deformation demands of the members as well as the story drift ratio. In the present study, a simple method of estimating the beam plastic rotation was developed for special-moment-resisting steel frame structures designed with strong column-weak beam behavior. The proposed method uses elastic analysis rather than nonlinear analysis, which is difficult to use in practice. The beam plastic rotation was directly calculated based on the results of the elastic analysis, addressing the moment redistribution, the column and joint dimensions, the movement of the plastic hinge, the panel zone deformation, the gravity load, and the strain-hardening behavior. In addition, the rocking effect of the braced frame or core wall on the beam plastic rotation was addressed. For verification, the proposed method was applied to a six-story special-moment frame designed with strong column-weak beam behavior. The predicted plastic rotations of the beams were compared with those that were determined via nonlinear analysis. The beam plastic rotations that were predicted using the proposed method correlated well with those that were determined from the nonlinear pushover analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.691-701
• /
• 2017

The barbell squat is a fundamental physical exercise for strengthening the lower body and core muscles. It is an integral part of training and conditioning programs in sports, rehabilitation, and fitness. In this paper, we proposed a virtual test framework for squat exercises using a Smith machine to simulate joint torques and muscle forces, based on an integrated product-human model and motion synthesis algorithms. We built a muscular skeletal human model with boundary conditions modeling the interactions between the human body and a machine or the ground. To validate the model, EMG, external forces, and squat motions were captured through physical experiments by varying the foot position. A regression-based motion synthesis algorithm was developed based on the captured squat motions to generate a new motion for a given foot position. The proposed approach is expected to reduce the need for physical experiments in the development of training programs.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.3
• /
• pp.307-320
• /
• 2002

Electronic commerce creates serious problems for tax administration because of difficulties associated with the identification of traders, coding of trade activities and so on. The core issue with respect to resolving tax-related problems in electronic commerce is first, the identification of individual transactions through internet and their contents as well as traders. Secondly, it is the ability of tax authorities to secure effectively such data and information as identifying taxpayers, taxable amount and tax evasion on time. The tax authorities are studying the way to resolve tax evasion associated with electronic commerce by using payment system. Above of all, it is imperative to establish a systematic international cooperation in collecting value added taxes for electronic commerce. In order to enhance the effectiveness of tax system, the authorities of different nations should make joint efforts to collect taxes by exchanging such information as identification and registration of business as well as details of transactions among nations of production and consumption.