Browse > Article
http://dx.doi.org/10.5781/KWJS.2013.31.3.76

Effect of Bonding Condition on the Tensile Properties of Diffusion Bonded Haynes230  

Kang, Gil-Mo (Dept. of Material Science and Engineering, Pusan National University)
Jeon, Ae-Jeong (National Core Research Center(NCRC), Pusan National University)
Kim, Hong-Kyu (Agency for Defense Development)
Hong, Sung-Suk (Agency for Defense Development)
Kang, Chung-Yun (Dept. of Material Science and Engineering, Pusan National University)
Publication Information
Journal of Welding and Joining / v.31, no.3, 2013 , pp. 76-83 More about this Journal
Abstract
This study investigated the effect of bonding temperature and holding time on microstructures and mechanical properties of diffusion bonded joint of Haynes230. The diffusion bonds were performed at the temperature of 950, 1050, and $1150^{\circ}C$ for holding times of 30, 60, 120 and 240 minutes at a pressure of 4MPa under high vacuum condition. The amount of non-bonded area and void observed in the bonded interface decreased with increasing bonding temperature and holding time. Cr-rich precipitates at the linear interface region restrained grain migration at $950^{\circ}C$ and $1050^{\circ}C$. However, the grain migration was observed in spite of short holding time due to the dissolution of precipitates to base metal in the interface region at $1150^{\circ}C$. Three types of the fracture surface were observed after tensile test. The region where the coalesce and migration of grain occurred much showed high fracture load because of base metal fracture whereas the region where those did less due to the precipitates demonstrated low fracture load because of interface fracture. The expected fracture load could be derived with the value of fracture area of base metal ($A_{BF}$) and interface ($A_{IF}$), $Load=201A_{BF}+153A_{IF}$. Based on this equation, strength of base metal and interface fracture were calculated as 201MPa and 153MPa, respectively.
Keywords
Ni-base superalloy; Haynes230; Diffusion bonding; Tensile properties; microstructure; Bonding condition;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 C.F. McDonald, Gas turbine recuperator technology advancements, ASME, 1972, 72-GT-32
2 C.F. McDonald, Gas turbine recuperator technology advancements, in: Proceedings of Institute of Metals Conference on Heat Exchanger Materials, UK, 1995, 337-369
3 Y. W. Lee, J. H. Kim, Influence of Brazing Temperature on Strength and Structure of SUS304 Stainless Steel Brazed System with BNi-2 Filler Metal, Kor. J.Mater. Res, (2007), 17-3, 179-183   과학기술학회마을   DOI   ScienceOn
4 K. H. Kim, Effect of Brazing Temperature and Homogenizing Time to Joining Characteristics of Ni -based Superalloys, Proceedings of KWJS, 46 (2006), 266-268 (in Korean)
5 Xiuqing Li, David Kininmont, Renaud Le Pierres and Stephen John Dewson, Alloy 617 for the High Temperature Diffusion-Bonded Compact Heat Exchangers, Proceedings of ICAPP '08, 1 (2008), 282-288
6 Widodo Widjaja Basuki , Oliver Kraft , Jarir Aktaa, Optimization of solid-state diffusion bonding of Hastelloy C-22 for micro heat exchanger applications by coupling of experiments and simulations, Materials Science and Engineering A, 538 (2012), 340-348   DOI   ScienceOn
7 Takeda, T., Kunitomi, K., Horie, T., Iwata, K., Feasibility study on the applicability of a diffusionwelded compact intermediate heat exchanger to next-generation high temperature gas-cooled reactor, Nuclear engineering and design, 168 (1997), 11-21   DOI   ScienceOn
8 Mylavarapu, S.K., Sun, X., Christensen, R.N., Unocic, R.R., Glosup, R.E., Patterson, M.W., Fabrication and design aspects of high-temperature compact diffusion bonded heat exchangers, Nuclear Engineering and Design, 249 (2012), 49-56   DOI   ScienceOn
9 Guoge, Z., Chandel, R.S., Pheow, S.H., Hoon, H.H., Effect of Bonding Temperature on the Precipitation of $\delta$Phase in Diffusion Bonded Inconel 718 Joints, Materials and Manufacturing Processes, 21-5 (2006), 453-457   DOI   ScienceOn
10 Denis E. Clark, Ronald E. Mizia, Michael V. Glazoff, Michael G. McKellar, Diffusion-Welded Microchannel Heat Exchanger for Industrial Processes, Journal of Thermal Science and Engineering Applications, 5 (2013), 1-12
11 Gosse, S., Alpettaz, T., Chatain, S., Gueneau, C., Chromium Activity Measurements in Nickel Based Alloys for Very High Temperature Reactors: Inconel 617, Haynes 230 and Model Alloys, Journal of Engineering for Gas Turbines and Power, 131-6 (2009), No.062901
12 Xiuqing li, Tim Smith, David Kininmont and Stephen John Dewson, Materials for nuclear diffusion-bonded compact heat exchangers, Proceedings of ICAPP '09, 1 (2009), No.9058
13 F. Meyer-Olbersleben, N. Kasik, B. Ilschner, and F. Rezai-Aria, The thermal fatigue behavior of the combustor alloys in 617 and HAYNES 230 before and after welding, Metallurgical and Materials Transactions A, 30-4 (1999), 981-989   DOI
14 Factor, M.J., Wenzel, J.E., Lee, S., Use Of Haynes Alloy 230 For Supercritical Water Reactors, American Institute of Chemical Engineers AIChE, (2007), No.74094
15 Klarstrom, D L, The development of HAYNES 230 alloy, Materials Design Approaches and Experiences, 4-8 (2001), 297-307
16 M. D. Bellware, Fundamentals of Brazing for Elevated-temperature Service, Welding J, 37 (1958), 683-691
17 Rabinkin, A., Wenski, E., Ribaudo, A., Brazing stainless steel using a new MBF-series of Ni-Cr-B-Si amorphous brazing foils, Welding Journal, 77-2 (1998), 66
18 J.R. Davis: ASM Handbook, Vol. 2: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM International, Materials Park, 2 (1990), 774
19 W.F. Smith: Structure and Properties of Engineering Alloys, McGraw-Hill Inc., New York, NY, 1993, 494-8
20 A. A. Shirzadi and E. R. Wallach, New method to diffusion bond superalloys, Science and Technology of Welding and Joining, 9-1(2004), 37   DOI   ScienceOn
21 Robert E. Reed-Hill, Physical metallurgy principles, fourth edition, 245-253