• Journal of Ecology and Environment
• /
• v.30 no.2
• /
• pp.187-193
• /
• 2007

Higher plants can be categorized as C3, C4 or CAM according to their photosynthetic pathways, and some succulent plants are known to shift their patterns of photosynthesis from C3 to CAM in response to environmental stresses such as salt treatment or water deficiency. To investigate fundamental photosynthetic patterns and the induction of pattern shifts (C3, CAM, C3-CAM etc.) as a result of environmental stresses, we measured the water content, diurnal changes in pH, net $CO_2$ exchange, transpiration rate, total ionic contents, and osmolality of Kalancoe daigremontiana, Sedum kamschaticum and Sedum sarmentosum which belong to Crassulaceae known as representative CAM plant, after 10 days of drought treatment. S. kamschaticum and S. sarmentosum did not show a significant difference in diurnal pH variation in the treatment and control conditions. However, the pH of drought-treated Kalancoe was low at night and high in the daytime, with a pH value between 4 and 5. Typical CAM plants display a net $CO_2$ exchange that increases at night and decreases in the daytime. Kalancoe displayed the predicted pattern. However, S. kamschaticum and S. sarmentosum showed a photosynthetic pattern more typical of C3 plants, and did not show changes in photosynthetic pattern under drought stress. Kalancoe also showed a transpiration rate typical for CAM pho-tosynthesis, whereas the transpiration rates of S. kamschaticum and S. sarmentosum were in the typical range for C3 photosynthesis. Kalancoe had high total ionic contents during the night, which decreased somewhat during the daytime, whereas S. kamschaticum and S. sarmentosum displayed the opposite pattern. This result is similar to the diurnal patterns of changes in pH in the three plant species, which suggests a relationship between pH and ionic contents. S. sarmentosum showed lower osmolality under drought stress than in the control condition, whereas the osmolality of Kalancoe and S. kamschaticum did not differ between conditions. S. sarmentosum may have maintained internal water content by lowering its osmolality and raising its total ionic contents. In conclusion, Kalancoe displayed the characteristic responses of a typical CAM plant, whereas S. kamschaticum and S. sarmentosum displayed aspects of the C3 photosynthetic pattern under drought conditions. These results suggest that S. kamschaticum and S. sarmentosum (Crassulacea) in Korea overcome drought stress by increasing solute and ionic contents internally rather than changing their photosynthetic pattern from C3 to CAM under drought stress.

• Journal of Nutrition and Health
• /
• v.11 no.3
• /
• pp.37-42
• /
• 1978

Actomyosin and myofibril were extracted from Korean native Goat muscle with the Weber-Edsall solution. ATPase activities and physiochemical properties were measured. The results obtained were as follows; 1) Mg-activitied ATPase activity of actomyosin and myofibrill from Korean native Goat muscle exhibited a common biphasic response, a typical ATPase pattern, that is high at a low ionic strength and low at a high ionic strength. Actomyosin showed high activity than myofibrill. 2) Mg-activited ATPase activity of actomyosin from muscle increased extraction time 24 hours. 3) EDTA-enhanced ATPase activity of actomyosin was greater than myofibrill and low at the low ionic strength, high at the high ionic strength. The difference of the activity were shown great broad pattern at the after 0.3M KCI concentration. 4) Effect of EGTA on-ATPase activity of myofibrill and actomyosin from muscle was measured, the Mg-ATPase activity was markedly depressed. 5) Solubility of actomyosin from muscle began to solubilize at KCI concentration of 0.28M and solubilized completely at the KCI concentration of 0.3M.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.409-414
• /
• 2008

The fabrication of gelatin nanofibers by electro spinning has been examined using the TFE/DW co-solvent system. It has been found that no beads-on-string structure was formed for the solution containing ionic salts. The resulting fibers exhibited a uniform diameter ranging from 110 to 125 nm. As the concentration of ionic salts increases, the beads become smaller and more spindle like, due to the increase of viscosity and conductivity. The addition of ionic salts induces a higher charge density on the surface of ejected jet during spinning, leading that higher elongation forces are applied to the jet. The higher enhancement of viscosity and conductivity was observed in gelatin solutions by the use of divalent salt. However, the concentration of ionic salts scarcely affected the variation of fiber diameter. While very low crystallinity was observed from XRD pattern for the sample containing no ionic salt, which increased with increasing the concentration of ionic salts.

• Journal of Pharmaceutical Investigation
• /
• v.19 no.4
• /
• pp.179-183
• /
• 1989

Drug release experiments were performed based on pH-sensitive swelling behaviors of polymethacrylic acid. 5-Fluorouracil as a nonionic model drug revealed release patterns depending solely on pH-dependent swelling kinetics of polymethacrylic acid. In contrast, release of propranolol hydrochloride as a cationic model drug was significantly affected by ionic drug-polymer interaction as well as the swelling kinetics. Accordingly, a zero-order release pattern was obtained at pH 7, which was distinguished from the general matrix type drug release pattern.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.379-381
• /
• 1994

Volume holograms recorded in photorefractive materials can find important applications in optical memories and optical computing systems. One problem with a photorefractive hologram is that it gets erased by the readout light. Nondestructive readout can be achieved by hologram fixing, and several fixing methods have been reported. Fixing is accomplished by thermally activated motion of an unknown ionic defect, which neutralizes the electronic space-charge patterns. At room temperature the ionic patterns are stabilized. When the electrons are partially redistributed by light, a net space-charge pattern appears, and tile fixed hologram can be read out. In this paper, theoretical modeling and some experimental results are presented for thermal fixing of volume phase holograms in photorefractive $LiNbO_3$:Fe. Thermal fixing can be done during or after recording and depends on fixing temperature ($100{\sim}200^{\circ}C$ range) and grating length. Fixed Slating can be erased completely at the temperature over $300^{\circ}C$. Theoretical modeling shows weil the compensation of electronic Slating by ionic grating and is in good agreement with experimental results. In experiments the dependence of thermal fixing on temperatures and grating lengths is investigated.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.4
• /
• pp.420-431
• /
• 2010

The water-soluble components have been analyzed from the total suspended particulate (TSP) collected at Gosan site of Jeju Island for ten years (1997~2006), and the long-term variations of ionic constituent concentrations have been investigated in order to understand the pollution characteristics of atmospheric aerosols. Their mean concentrations were in the order of nss-${SO_4}^{2-}$ > $Na^+$ > ${NO_3}^-$ > $Cl^$ > ${NH_4}^+$ > nss-$Ca^{2+}$ > $K^+$ > $Mg^{2+}$. The ${NO_3}^-$ concentrations had increased somewhat smoothly compared to those of ${SO_4}^{2-}$ for the past 10 years, possibly indicating the recent energy consumption pattern changes in China. The concentrations of ionic aerosol components showed mostly higher values during the Asian Dust storm periods, and the concentration ratios of nss-$Ca^{2+}$, ${NO_3}^-$, and nss-${SO_4}^{2-}$ between the Asian Dust and Non-Asian Dust periods were 6.9, 2.4, and 1.3, respectively. The anthropogenic nss-${SO_4}^{2-}$, ${NO_3}^-$, ${NH_4}^+$ and the soil originated nss-$Ca^{2+}$ components showed high concentrations as the air parcels were moved from the Asia continent, on the other hand, their concentrations were relatively low as moving from the Northern Pacific into the Gosan area.

• Journal of Magnetics
• /
• v.7 no.2
• /
• pp.25-28
• /
• 2002

Slowly cooled $Cu_xFe_{3-x}O_4$ ($\chi$=0.1, 0.2) have been investigated over a temperature range from 82 to 700 K using the M$\ddot{o}$ssbauer technique. X-ray diffraction shows that these have a single-phase cubic spinel structure of lattice parameters $\alpha$=8.396 and 8.398${\AA}$, respectively. Since Cu ions prefer B (octahedral) sites to A (tetrahedral) sites, the ionic distribution is $(Fe)_A[Fe_{2-x}Cu_x]_BO_4$. M$\ddot{o}$ssbauer spectra consisted of two sets of 6-line pattern from. A site in ferric state and B site in ferrous-ferric state. Intensity ratio of B to A subspectra is 1.0 at 82 K and increases to 2.0 at 700 K with increasing temperature. After annealing the samples under vacuum at $450^circ{C}$ for a half hour, x-ray diffraction patterns have the peaks of magnetite- and hematite-phase. Lattice constants of magnetite-phase are 8.395 and 8.392 ${\AA}$ smaller than 8.396 and 8.398 ${\AA}$ before annealing, respectively. M$\ddot{o}$ssbauer spectra reveal the conventional magnetite pattern with the additional hematite pattern. Intensity ratios of B to A subspectra fur magnetite-phase become 1.9-2.0 over all temperature ranges and Cu ions are distributed over A and B sites randomly. Ratios of hematite to total intensity in M$\ddot{o}$ssbauer spectra for $\chi$= 0.1 and $\chi$= 0.2 are 10 and 21%, respectively. These hematite ratios may be due to annealing under vacuum at $450^circ{C}$, which transforms $Cu^{2+}$ ionic states into $Cu^{1+}$. Verwey temperatures far $\chi$= 0.1 and $\chi$= 0.2 are $123\pm2$ K and $128\pm2$ K.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.69-76
• /
• 1998

This study was investigated to determine the effect of additives and ionic strength on the functionality of extracted proteins in preblends in order to use less additive in restructured meat products. Preblends contained the combinations of sodium chloride (NaCl; 0, 4.5, 9.0%), sodium tripolyphosphate (STPP; 0, 2.5, 5.0%), and tetrasodium pyrophosphate (PP; 0, 2.44, 4.88%). The pH values increased linearly with increasing STPP and PP concentrations (p<0.01). In the equivalent ionic strengths, PP was more effective than STPP in increasing pH. Phosphate ions were more effective on total extractable protein (used 1 M NaCl buffer) than chloride ion at equivalent ionic strengths. Solubility was decreased by adding NaCl and increasing total extractable proteins. Meat sulfhydryl contents were high with increasing total extractable proteins. When protein extracts were heated at $65^{\circ}C$, 7 min, meat sulfhydryl contents decreased and surface hydrophobicity increased (p<0.01). However, all protein extracts showed no differences in SDS-PAGE pattern. In conclusion, PP is more effective than STPP in order to use less additive but there was no linear relationship between functionnal improvement and ionic strength.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.575-581
• /
• 1997

UDs were synthesized from two different polyols(PTMG, PBEAG), ionic chain extender(DMPA), EDA with $H_{12}-MDI$. PU/PMMA hybrids were prepared with free radical polymerization of MMA monomer in MMA-swelled PUD. PUD particle size and film properties were investigated ionic content and polyol type. Mechanical and thermal properties of PU/PMMA hybrid film were studied in terms of PU's ionic content and the venation of PU/PMMA compositions. As DMPA content increased from 2wt% to 10wt% in PUD, particle size of PUD decreased. PUD's particle size with ester type polyol was found to be smaller then ether type polyol used. Phase separation between hard segment(HS) and soft segment(SS) with ionic contents in PU was shown by the thermal, mechanical property measurement. Although the composition of MMA was changed from 0 to 40 wt% in PU/PMMA hybrid, the particle size of the hybrid did not increase. Using the ester type polyol, tensile strength of hybrid was found to increase by 2wt% - 6wt% DPMA content, but as higher content the strength of hybrid decreased. Moreover with the ether type polyol, tensile strength of hybrid was observed to increase by 2wt% - 4wt% DMPA content, while decreasing at higher content. PU and PMMA polymer molecule being mixed in molecular level was confirmed from the pattern of $T_g$ in DSC thermogram.

• Journal of Environmental Science International
• /
• v.27 no.4
• /
• pp.241-250
• /
• 2018

The objective of this study was to estimate air quality trends in the study area by surveying monthly and seasonal concentration trends. To do this, the mass concentration of $PM_{10}$ samples and the metals, ions, and total carbon in the $PM_{10}$ were analyzed. The mean concentration of $PM_{10}$ was $33.9{\mu}g/m^3$. The composition of $PM_{10}$ was 39.2% ionic species, 5.1% metallic species, and 26.6% carbonic species (EC and OC). Ionic species, especially sulfate, ammonium, and nitrate, were the most abundant in the $PM_{10}$ and had a high correlation coefficient with $PM_{10}$. Seasonal variation of $PM_{10}$ showed a similar pattern to those of ionic and metallic species. with high concentration during the winter and spring seasons. $PM_{10}$ showed high correlation with the ionic species $NO_3{^-}$ and $NH_4{^+}$. In addition, $NH_4{^+}$ was highly correlated with $SO{_4}^{2-}$ and $NO_3{^-}$. We obtained four factors through factor analysis and determined the pollution sources using the United States Environmental Protection Agency(U.S. EPA) pollution profile. The first factor accounted for 51.1% of $PM_{10}$ from complex sources, that is, soil, motor vehicles, and secondary particles: the second factor indicated marine sources; the third factor, industry-related sources; and the last factor, heating-related sources. However, the pollution profile used in this study may be somewhat different from the actual situation in Korea because it was from US EPA. Therefore, to more accurately estimate the pollutants present, it is necessary to create a pollution profile for Korea.