• 제목/요약/키워드: ion-binding

검색결과 464건 처리시간 0.032초

된장에서 분리된 유산균의 결합력에 의한 Heterocyclic Amines 제거 (Heterocyclic Amines Removal by Binding Ability of Lactic Acid Bacteria Isolated from Soybean Paste)

  • 임성미
    • 미생물학회지
    • /
    • 제50권1호
    • /
    • pp.73-83
    • /
    • 2014
  • 단백질이 풍부한 식품을 고온 하에서 조리하는 과정 중에 주로 발생되는 돌연변이원 heterocyclic amines (HCAs)에 대한 유산균의 결합력 및 제거능을 조사하였다. 당 발효능 및 16S rRNA 염기서열 분석을 통해 동정된 19종의 유산균 중 Lactobacillus acidophilus D11, Enterococcus faecium D12, Pediococcus acidilactici D19, L. acidophilus D38, Lactobacillus sakei D44, Enterococcus faecalis D66 및 Lactobacillus plantarum D70의 세포이나 배양 상등액은 3-amino-1,4-dimethyl-5H-pyrido[4,3-b]indole (Trp-P-1)과 3-amino-1-methyl-5Hpyrido[4,3-b] indole (Trp-P-2)에 의한 Salmonella typhimurium TA98 및 TA100의 돌연변이 유발을 억제할 수 있었다. HCAs에 대한 유산균 세포의 결합력은 cell wall, exopolysaccharide 및 peptidoglycan 보다 높게 나타났다. 한편, 이들의 결합력은 단백질 분해효소, 가열, sodium metaperiodate 및 산 처리에 의해 유의하게 감소되었으므로 세포벽에 존재하는 당이나 단백질 성분이 이들 HCAs을 결합시키는데 중요한 역할을 하는 것으로 확인되었다. 또한 E. faecium D12, L. acidophilus D38 및 E. faecalis D66의 결합력은 SDS나 금속이온에 의해 감소되었으므로 이들세포와 돌연변이원 사이에는 이온 결합이나 소수성 결합이 작용하는 것으로 추정되었다. 한편, HCAs 결합력이 높은 L. acidophilus D38과 L. plantarum D70은 장관 상피세포에 대한 부착력이 낮으므로 돌연변이원을 세포에 결합시켜 체외로 배출함으로써 독성물질을 제거하는데 효과적인 것으로 확인되었다.

이온 주입법을 이용한 ZnO 박막의 As 도핑 (Arsenic Doping of ZnO Thin Films by Ion Implantation)

  • 최진석;안성진
    • 한국재료학회지
    • /
    • 제26권6호
    • /
    • pp.347-352
    • /
    • 2016
  • ZnO with wurtzite structure has a wide band gap of 3.37 eV. Because ZnO has a direct band gap and a large exciton binding energy, it has higher optical efficiency and thermal stability than the GaN material of blue light emitting devices. To fabricate ZnO devices with optical and thermal advantages, n-type and p-type doping are needed. Many research groups have devoted themselves to fabricating stable p-type ZnO. In this study, $As^+$ ion was implanted using an ion implanter to fabricate p-type ZnO. After the ion implant, rapid thermal annealing (RTA) was conducted to activate the arsenic dopants. First, the structural and optical properties of the ZnO thin films were investigated for as-grown, as-implanted, and annealed ZnO using FE-SEM, XRD, and PL, respectively. Then, the structural, optical, and electrical properties of the ZnO thin films, depending on the As ion dose variation and the RTA temperatures, were analyzed using the same methods. In our experiment, p-type ZnO thin films with a hole concentration of $1.263{\times}10^{18}cm^{-3}$ were obtained when the dose of $5{\times}10^{14}$ As $ions/cm^2$ was implanted and the RTA was conducted at $850^{\circ}C$ for 1 min.

The electronic structure of the ion-beam-mixed Pt-Cu alloys by XPS and XANES

  • Lim, K.Y.;Lee, Y.S.;Chung, Y.D.;Lee, K.M.;Jeon, Y.;Whang, C.N.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 1998년도 제14회 학술발표회 논문개요집
    • /
    • pp.133-133
    • /
    • 1998
  • In the thin film alloy formation of the transition metals ion-beam-mixing technique forms a metastable structure which cannot be found in the arc-melted metal alloys. Sppecifically it is well known that the studies about the electronic structure of ion-beam-mixed alloys pprovide the useful information in understanding the metastable structures in the metal alloy. We studied the electronic change in the ion-beam-mixed ppt-Ct alloys by XppS and XANES. These analysis tools pprovide us information about the charge transfer in the valence band of intermetallic bonding. The multi-layered films were depposited on the SiO2 substrate by the sequential electron beam evapporation at a ppressure of less than 5$\times$10-7 Torr. These compprise of 4 ppairs of ppt and Cu layers where thicknesses of each layer were varied in order to change the alloy compposition. Ion-beam-mixing pprocess was carried out with 80 keV Ae+ ions with a dose of $1.5\times$ 1016 Ar+/cm2 at room tempperature. The core and valence level energy shift in these system were investigated by x-ray pphotoelectron sppectroscoppy(XppS) pphotoelectrons were excited by monochromatized Al K a(1486.6 eV) The ppass energy of the hemisppherical analyzer was 23.5 eV. Core-level binding energies were calibrated with the Fermi level edge. ppt L3-edge and Cu K-edge XANES sppectra were measured with the flourescence mode detector at the 3C1 beam line of the ppLS (ppohang light source). By using the change of White line(WL) area of the each metal sites and the core level shift we can obtain the information about the electrons pparticippating in the intermetallic bonding of the ion-beam-mixed alloys.

  • PDF

이온 이동에 적합한 아크릴고분자 박막의 조성과 수소이온, 수산화이온, 구리이온의 선택적 검출 (Acrylic Polymer Composition Suitable for Ion Delivery and Selective Detection of Proton, and Hydroxyl and Cu(II) Ions)

  • 이다혜;우희정;도정윤
    • 폴리머
    • /
    • 제38권6호
    • /
    • pp.801-808
    • /
    • 2014
  • 광경화 아크릴고분자 필름에서 이온이동에 관한 연구를 하였다. 고분자에 결합된 아민기와 카르복실산 작용기의 함량을 조절하여 수소이온과 수산화이온의 이동에 적합한 필름을 제조하였다. 수소이온 이동 검출을 위해 p-methylred(PMR) 유도체를 사용하였고 수산화이온 검출을 위해 페놀프탈레인 유도체를 합성하여 각각 고분자에 도입하였다. 수소이온의 이동은 아민기의 함량이 많을수록 빠르게 진행되었고 수산화이온은 카르복실산의 함량이 높을수록 빠르게 이동하였다. 수소이온 이동은 필름표면과 내부로 빠르게 진행하였고 PMR 포함 필름의 흡수스펙트럼을 통해 관찰되었다. 산 용액에 감응하는 필름을 사용하여 색상변화의 가역성을 관찰하였고 연속 50회를 실시하는 동안 정확히 재현되었다. 구리(II) 이온은 카르복실산 작용기의 함량이 높은 필름에서 빠르게 이동하였다. 로다민이 도입된 필름에서 구리이온의 배위로 로다민의 고리열림 반응이 진행되었고 광흡수 및 발광특성 측정을 통해 구리이온의 이동을 추적하였다.

Synthesis and Anion Recognition of Cholic Acid-based Tripodal Receptor: A Chloride Selective Anion Receptor

  • Kim, Ki-Soo;Cho, Nam-Ju;Kim, Hong-Seok
    • Bulletin of the Korean Chemical Society
    • /
    • 제27권5호
    • /
    • pp.739-743
    • /
    • 2006
  • Synthesis of cholic acid-based tripodal receptor (1) and its high chloride ion affinity in comparison with that of chenodeoxycholic acid (2) and lithocholic acid-based receptor (3) was achieved. Anion binding affinities of the receptors were evaluated $by\;^1H$ NMR and ITC titrations. Tripodal receptor 1 showed a selective affinity for $CI ^-$ over $Br ^-$, $I^-$, $H_2 PO _4\;^-$, and $CH _3 CO_2\;^-$. The selectivity of 1 for $CI ^-$ is about 3 times that of $Br ^-$, and 17 times that for $H_2 PO_4\;^-$.

Diethylpyrocarbonate Inactivation of Aspartase from Hafnia Alvei

  • Shim, Jae-Hee;Kim, Hyo-Joon;Yoon, Moon-Young
    • BMB Reports
    • /
    • 제32권4호
    • /
    • pp.326-330
    • /
    • 1999
  • An aspartase purified from Hafnia alvei was inactivated by diethylpyrocarbonate (DEP) in a pseudo-first-order inactivation. The first-order plot was biphasic. The inactivation process was not saturable and the second order rate constant was $1.3\;M^{-1}s^{-1}$. The inactivated aspartase was reactivated with NH₂OH. The difference absorption spectrum of DEP-inactivated vs native enzyme preparations revealed a marked peak around 242 nm. The pH dependence of the inactivation rate suggests that an amino acid residue having a pK value of 7.2 was involved in the inactivation. L-aspartate, fumarate (substrates), and chloride ion (inhibitor) protected the enzyme against inactivation, indicating that histidine residues for the enzyme activity are located at the active site of this aspartase. Inspection of the presence and absence of $Cl^-$ ion demonstrated that the number of essential histidine residues is less than two. Thus, one or two histidines are in or near the aspartate binding site and participate in an essential step of the catalytic reaction.

  • PDF

철근콘크리트 구조물의 염소이온 침투 모델 개발 (Development of Chloride Ingress Model in Reinforced Concrete Structures)

  • 구현본;이광명
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.731-736
    • /
    • 2002
  • The degradation of reinforced concrete (RC) structures due to physical and chemical attacks has been a major issue in construction engineering. Deterioration of RC structures due to chloride attack followed by reinforcement corrosion is one of the serious problems. The objective of this study is to develop a form of mathematical model of chloride ingress into concrete. In order to overcome some limits of the previous approaches, a mathematical model of chloride ingress into concrete consisting of chloride solution intrusion through the capillary pore and chloride ion diffusion through the pore water was proposed. Moreover, the variability of diffusivity of chloride ion due to degree of hydration of concrete, relative humidity in pore, exposure condition, and variation of chloride binding was considered in the chloride ingress model.

  • PDF

Quercetin의 카드뮴 착물반응에 대한 최적농도 (Optimum Concentration of the Cd(II)-Quercetin Complexation Reaction)

  • 이정호;신선우;백승화
    • 약학회지
    • /
    • 제53권5호
    • /
    • pp.235-240
    • /
    • 2009
  • The interaction of cadmium (II) ion with quercetin was investigated in aqueous solution at different pH. The quercetin/cadmium stochiometries for cadmium (II) binding have been determined by UV-vis spectrophotometric method. The complexation of Cd(II) ion with 54.72 ${\mu}M$ quercetin (A=1.00793) was formed in 0.2 M $NH_3-0.2$ M $NH_4Cl$ (pH 8.0) buffer solution. 1:1 Cd(II)-complex had a maximum absorbance and showed the bathochromic shift of the long-wavelength band of the UV-vis spectra in the alkaline pH when interacted with quercetin in buffer solution. These results suggest that Cd(II)-quercetin complex has the optimal condition of chelation in basic buffer solution.

습식 분무 열분해 방법으로 제조한 코발트 도핑된 티타늄 산화막의 표면 및 광학적 특성 (Surface and Optical Characteristics of Cobalt Dopped-titanium Oxide Film Fabricated by Water Spray Pyrolysis Technique)

  • 송호준;박영준
    • 한국재료학회지
    • /
    • 제15권3호
    • /
    • pp.209-215
    • /
    • 2005
  • Titanium dioxide films $(TiO_2)$ doped cobalt transition metal were prepared on titanium metal by water spray pyrolysis technique. Micro-morphology, crystalline structure, chemical composition and binding state of sample groups were evaluated using field emission scanning microscope(FE-SEM), X-ray diffractometer(XRD), Raman spectrometer, X-ray photoelectron spectrometer(XPS). $TiO_2$ films of rutile structure were predominately formed on all sample groups and $Ti_2O_3$ oxide was coexisted on the surface of cobalt doped-sample groups. The optical absorption peaks measured by using UV-VIS-NIR spectrophotometer were observed at specific wavelength region in sample groups doped cobalt ion. This result could be analyzed by introducing crystal field theory.

DFT Study for p-tert-Butylcalix[4]arene Crown Ether Bridged at the Lower Rim with Pyridyl Unit Complexed with Potassium Ion

  • Choe, Jong-In
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권12호
    • /
    • pp.2310-2314
    • /
    • 2007
  • Stable molecular conformations were calculated for the p-tert-butylcalix[4]arene crown ether bridged at the lower rim with pyridyl unit (1) in the various conformers and their potassium-ion complexes. The structures of three distinct conformations have been optimized using DFT B3LYP/6-31G(d,p) method. Relative stability of free host 1 is in following order: cone (most stable) > partial-cone > 1,3-alternate conformer. For two different kinds of complexation mode, the potassium cation in the crown-ether moiety (cr) has much better complexation efficiency than in the benzene-rings (bz) pocket for all three kinds of conformation of host molecule 1. The relative stability of complex (1+K+) in the cr-binding mode is in following order: partial-cone (most stable) ~ cone > 1,3-alternate conformer.