• 폴리머
• /
• 제24권6호
• /
• pp.802-809
• /
• 2000

Poly(L-glutamic acid) (PLGA)와 PVA 블렌드막을 제조한 후, ethanol 수용액중에서 막증의 polypeptide 사슬의 2차구조 전이거동에 미치는 용매조성 및 대이온종의 영향과 알칼리 금속 이온 (Li, na, K, Cs)에 대한 투과특성을 조사하였다. 막중 PLG 알칼리 금속염의 helix 형성거동에 있어 대이온 선택성은 Li>Na>K>Cs의 순으로 관찰되었고, 이와 같은 특이성은 탈용매화 에너지와 정전에너지의 감소에 따른 고분자 하전기와 대이온과의 contact ion-pair 형성에 의한 것으로 설명하였다. 또한 PLGA/PVA 블렌드막의 ethanol 수용액 중에서의 알칼리 금속이온의 투과거동을 살펴보면, ethanol 농도가 점차 증가함에 따라 K, Cs의 경우는 투고도가 증가한, Li, Na의 경우에는 감소하였다. K, Cs 이온의 경우 대이온과 염소이온간의 ion-pair (M$^{+}{\cdot}$Cl$^{-}$)형성에 의한 Donnan배제효과의 감소와 중성염 형태로의 분배량 증가때문인 것으로, Li, Na 이온의 경우 막중의 coil-helix 구조전이에 따른 자유체적의 감소와 고분자 하전기와의 상호작용이 증가하여 확산성이 크게 감소하였기 때문인 것으로 생각된다.

• 폴리머
• /
• 제31권3호
• /
• pp.247-254
• /
• 2007

본 연구에서는 폐수 중에 함유된 황산이온을 전기투석 방법으로 회수하기 위하여 불균질 음이온교환막을 압출성형 방법으로 제조하였다. 불균질 음이온교환 막의 함수율, 이온교환용량 및 이온수송수는 이온교환 수지의 함량이 증가함에 따라 증가하였고 전기저항은 감소하였다. 또한 불균질 음이온교환막의 인장강도는 이온교환 수지의 함량이 증가함에 따라 감소하였으며 LLDPE막의 경우 인장강도는 수지의 함량이 30 wt%일 때 가장 높게 나타났다. 함수율은 이온교환 수지의 함량이 증가함에 따라 증가하였으며, 불균질 이온교환막의 이온수송수는 최대 0.86 이었고, 전기저항 값은 50 wt% 수지 함량의 LDPE 막이 $46.5{\Omega}{\cdot}cm^2$로 가장 높게 나타났다. 한편 제조한 막의 황산이온에 대한 전기투석 운전 결과 전류효율은 황산농도 0.5 mol/L, 전류밀도 $125 mA/cm^2$에서 가장 높게 나타났다.

• 한국가시화정보학회지
• /
• 제16권1호
• /
• pp.61-69
• /
• 2018

Ion exchange membrane can transfer only cation or anion in electrically conductive fluids. Recent studies have revealed that such selective ion transport can initiate electroconvective instability, resulting vortical fluid motions on the membrane. This so-called electroconvective vortex (a.k.a. electroconvection (EC)) has been in the spotlight for enhancing an ion flux in electrochemical systems. However, EC under shear flow has not been investigated yet, although most related systems operate under pressure-driven flows. In this study, we present the direct visualization platform of EC under shear flow. On the transparent silicone rubber, microscale channels were fabricated between ion exchange membranes, while allowing microscopic visualization of fluid flow and ion concentration changes on the membranes. By using this platform, not only we visualize the existence of EC under shear flow, its unique characteristics are also identified: i) unidirectional vortex pattern, ii) its advection along the shear flow, and iii) shear-sheltering of EC vortices.

• 폴리머
• /
• 제26권5호
• /
• pp.575-581
• /
• 2002

본 연구는 폴리에틸렌 기재에 비드와 섬유상 이온교환체의 배합비를 달리하여 불균질 이온 교환막을 제조하였다. PE 불균질 이온교환막의 이온교환능은 섬유강 이온교환체의 양이 증가할수록 선형적으로 증가하였으며 30 wt%에서 최대 1.86 meq/g 이었다. 불균질 이온교환막의 함수율, 고정이온농도 및 이온운반율도 섬유상 이온교환체의 양이 증가할수록 증가하였나. 반면 불균질 이온교환막의 전기저항은 섬유상 이온교환체의 양이 증가할수록 감소하였으며, IXF (ion exchange fiber)의 혼합량이 30 wt%에서 5$\Omega$/$\textrm{cm}^2$으로 전기저항 값이 가장낮았다.

• Computers and Concrete
• /
• 제11권4호
• /
• pp.305-316
• /
• 2013

This paper aims to study the effect of measurement methods and cracking on chloride transport of concrete materials. Three kinds of measurement methods were carried out, including immersion test, rapid migration test and steady-state migration test. All of these measurements of chloride transport show that chloride ion diffusion coefficient decreased with the reduction of water to cement ratio. Results of the immersion test were less than that of rapid migration test and steady-state migration test. For the specimen of lower water to cement ratio, the external electrical field has little effect on chloride binding relatively. Compared with the results obtained by these different measurement methods, the lower water to cement ratio may cause smaller differences among these different methods. The external voltage can reduce chloride binding of concrete, and the higher electrical field made a strong impact on the chloride binding. Considering the effect of high voltage on the specimen, results indicate that results based on the steady-state migration test should be more reasonable. For cracked concrete, cracking can accelerate the chloride ion diffusion.

• Elastomers and Composites
• /
• 제23권1호
• /
• pp.11-17
• /
• 1988

The transport of chromium(VI) ion from waste water through the liquid surfactant membrane containing tri-n-octylamine as a carrier, was analyzed by a slab model and was investigated through experiments. For the experiment of membrane stability, concentrations of surfactant and liquid paraffin oil were analyzed. Extraction experiments were carried out to observe the effect of system variables, such as concentrations of carrier, and initial chromium(VI) ion in external aqueous phase at $25^{\circ}C$. It is concluded that the most stable formation of liquid membrane emulsion was obtained when surfactant concentration is above 3 wt.% and liquid paraffin oil concentration is 50 vol.%. The theoretical equation on the transport of chromium(VI) ion agreed well with the experimental results.

• 한국정밀공학회지
• /
• 제28권3호
• /
• pp.383-388
• /
• 2011

The cold hollow cathode gas ion source is under development for multi aperture focused ion beam (FIB) system. In this paper, we describe the cold hollow cathode ion source design and the general ion source performance using Ar gas. The glow discharge characteristics and the ion beam current density at various operation conditions are investigated. This ion source can generate maximum ion beam current density of approximately 120 mA/$cm^2$ at ion beam potential of 10 kV. In order to effectively transport the energetic ions generated from the ion source to the multi-aperture focused ion beam(FIB) system, the einzel lens system for ion beam focusing is designed and evaluated. The ions ejected from the ion source can be forced to move near parallel to the beam axis by adjusting the potentials of the einzel lenses.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권2호
• /
• pp.103-110
• /
• 2000

In order to understand the wintertime intermittent characteristics of the trans-boundary air pollutant transport observed in East Asia, a numerical simulation of the long-range transport of pollutants was applied using an atmospheric transport model(STEM-II). The numerical simulation was carried out for the entire month of January 1997 and specific atmospheric aerosol (including sulfate, nitrate, and other ion compounds0 observation data were compared from four observation sites(Cheju Island, Kanghwa Island, Dazaifu, and Fukue Island). The observation data revealed that concentration peaks were intermittently observed at 3 to 4-day intervals plus the four observation sites exhibited a very similar spatial variation. The horizontal and spatial scale of the heavily polluted air masses was analyzed based on numerical results. The mechanism of the intermittent transport of air pollutants was clearly explained by a comparison of the observed data with the numerical output. It was found that the wind pattern variations associated with the synoptic scale pressure system changes play an extremely important role in the transport of pollutants in this region.

• Korean Membrane Journal
• /
• 제5권1호
• /
• pp.61-67
• /
• 2003

Various characteristics of ion transport properties of a charged mosaic membrane with a parallel array of positive and negative functional charges were investigated, From the analysis of the volume flux, it was found that the salt flux based on nonequilibrium thermodynamics, preferential salt transport across the charged mosaic membrane. Transport properties of the magnesium sulfate(MgSO$_4$) and sucrose across the charged mosaic membrane were estimated. As a result, metal salts transport depended largely on the charged states and molecular weight otherwise nonelectrolyte solution was rejected under all experimental conditions. On the other hand, the reflection coefficient s indicated the negative value that suggested preferential material transport and was independent of charged mosaic thickness.

• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1085-1088
• /
• 2002

Calix[6]arene having both carboxylic acid (1,3,5-) and carboxamide (2,4,6-) in an alternative way was synthesized. Transport rates of alkali and alkaline-earth metal ions were tested in bulk liquid membrane and polymer inclusion membrane. Ba2+ ion was found to give the highest transport rate among tested metal ions in both BLM and PIM systems. In PIM system, high durability (longer than 30 days) of the membrane was observed.