• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1462-1465
• /
• 2009

Because of its weak points that narrow viewing angle and grayscale inversion, 'bare' twisted nematic (TN) LCD has some limits to use as a display device, though its great strong points that low cost, high yield, simple design, high transmittance and normally white. The 'WideView(WV)' film which introduced by Fuji co., has been good solution to extend the viewing angles of TN mode, therefore that film have been used generally for TN panels needed wide viewing angle. This paper introduce the research to find the parameters of the Wide view film and a TN panel which affect viewing angle characteristics and how to adjust those parameters.

• 한국항공운항학회지
• /
• 제21권3호
• /
• pp.1-8
• /
• 2013

An application of adaptive flight controller is required for the non-linear and high uncertain system that configuration of tiltrotor aircraft is dramatically changed from rotary wing mode to fixed wing mode. In this paper, the applicable adaptive controller for the tiltrotor aircraft was designed using Neural Networks and DMI (Dynamic Model Inversion). The performance of the SCAS (Stability and Control Augmentation System) was simulated against manned military specification, using the fullscale model of 'Smart UAV(Unmanned Aerial Vehicle)' developed by Korea Aerospace Research Institute. And Neural Networks based adaptive controller was verified through its whole operating envelope using the established HQ (Handling Quality) criteria.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.479-480
• /
• 2006

We have studied the viewing angle control of a twist nematic liquid crystal display (TN-LCD). The TN-LCD exhibits a bad image quality along vertical direction, due to characteristics such as low contrast ratio and gray scale inversion. The proposed new TN-LCD has the function of switching between the wide viewing mode and narrow viewing angle mode using two tilted LC layers at both sides of a TN-cell. Tilt angles of the two LC layers, $14^{\circ}$ and $60^{\circ}$ were required in both wide viewing angle and narrow viewing angle modes, respectively.

• 자연과학논문집
• /
• 제8권2호
• /
• pp.237-255
• /
• 1996

패러디는 선행하는 친밀한 소재가 패러디스트에 의해 모방되면서 시작된다. 이 때 사용되는 기법은 모방, 유사, 변형, 과장, 아이러니, 파라독스등 다양하며 패러디스트의 의도와 능력에 따라 여러 가지 기법으로 풍자, 조롱, 경명, 의외성, 우스꽝스러움, 존경, 경외심 등과 또 이 모든것이 혼합된 어떤 효과를 주어 선행양식과 다른 비평적 거리가 있는 반복으로서 새롭게 창조 되는 것이다. 또한 패러디는 포스트모더니즘적 특징을 다분히 내포하고 있으므로 포스트모더니즘적 미의식이 팽배해진 화경에서 효과적인 표현양식으로 널리 사용되어지며 그 요구 또한 급증한다. 예술의 한 장르로서 복식에서도 패러디 기법은 역사적 입장으로서 과거를 비판적으로 재구성하여 새로운 복식을 창조하는 한 형식으로 널리 사용되고 있다.

• 한국항행학회논문지
• /
• 제26권5호
• /
• pp.331-337
• /
• 2022

색 분산과 비선형 Kerr 효과에 의한 신호 왜곡을 보상하는 광학 위상 공액과 결합된 분산 제어 링크에서 광섬유의 길이가 보상의 효율성을 결정하는 주요 요인이다. 분산 제어 링크는 표준 단일 모드 광섬유와 분산 보상 광섬유가 배열된 여러 개의 중계 구간으로 구성된다. 본 논문에서는 광 위상 공액기 (OPC; optical phase conjugator)를 중심으로 전반 링크와 후반 링크에서 각각 서로 다른 한 종류의 광섬유들의 길이 변화만으로 RDPS (residual dispersion per span)에 변화를 주는 링크에서의 보상 효과를 살펴보았다. 누적 분산 프로파일이 OPC를 중심으로 원점 대칭이 되면서 동시에 전반 링크에서는 누적 분산량은 모두 양으로, 반면 후반 링크에서는 누적 분산량은 모두 음으로 분포시키는 분산 제어 링크가 960 Gb/s 파장 분할 다중 신호에 대해 가장 우수한 보상이 얻어지는 것을 확인하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.44-48
• /
• 2000

Several parameters to represent the characteristics of the observed at the domestic networks from several earthquakes occurred in the Korean Peninsula. Parameters to fit most the multiple Fourier amplitude spectra of the observed accelerations are estimated. This study adopts the stochastic ground motion model referred to the BLWN mode in which the energy is distributed randomly over the duration of the source and which has proven to be very effective in modeling a wide range of ground motion observations. The stochastic ground motion model employed here uses an omega-squared ({{{{ omega ^2 }}) Brune source model with a single corner frequency and a constant stress drop,. The {{{{ omega ^2 }} source model has become a seismological standard because of its simplicity an ability to predict spectral amplitudes and shapes over an extremely broad ranges of magnitudes distances and from the inversion show very unstable based on the fact of high values of mean/median. These results may imply that more observed data and more precise site classification including accurate preparation analysis of data such as more accurate scaling from counts to kine are needed for more stable are effective inversion of Fourier amplitude spectrum of the observed ground motions.

• 대한기계학회논문집
• /
• 제19권10호
• /
• pp.2595-2606
• /
• 1995

Buoyancy-assisted melting of an unconstrained ice in an isothermally heated horizontal enclosure was numerically analyzed in a range of wall temperatures encompassing the density inversion point. The problem as posed here involves two physically distinct domains each of which has its own scales and respective heat transfer mode. These two domains join at the junction where the liquid squeezed out of the film region flushes into the lower melt pool. Both of these domains have been treated separately in the literature by a patching technique which invokes several, otherwise unnecessary, assumptions. The present study eliminates successfully such a superfluous procedure by treating the film and lower melt pool regions as a single domain. As a result of this efficient solution procedure, the interaction of the water stream ejected at the junction and the natural convection in the melt pool could be clarified for different wall temperatures. Though limited by two-dimensionality, the present results conformed indirectly the earlier reported transition of the flow pattern, as the wall temperature was increased over the density inversion point. The transient evolution of the melting surface, the time rate of change in melt volume fraction, the local and temporal variation of the heat transfer coefficients are analyzed and presented.

• 전기전자학회논문지
• /
• 제27권4호
• /
• pp.418-424
• /
• 2023

본 연구에서는 더블게이트 실리콘 나노시트 (SiNS) 피드백 전계효과 트랜지스터(FBFET)의 전기적 특성에 열처리가 미치는 영향을 분석하였다. 1000 초 동안 바이어스 스트레스를 인가했을 때 더블게이트 SiNS FBFET는 inversion layer의 전자에 의한 계면 트랩의 증가로 인해 채널 모드와 무관하게 negative bias stress 보다는 positive bias stress의 영향을 더 많이 받았다. 300 ℃에서 10 분 동안 열처리를 진행한 이후 소자는 원래의 특성을 완전히 회복하였으며 다시 1000 초 동안 바이어스 스트레스를 인가해도 특성이 변하지 않았다.

• Steel and Composite Structures
• /
• 제24권1호
• /
• pp.113-128
• /
• 2017

This paper highlights a study undertaken on the free vibration of a precast steel-concrete composite slab panel for track support. The steel-concrete composite slab track is an evolvement from the slab track, a form of ballastless track which is becoming increasingly attractive to asset owners as they seek to reduce lifecycle costs and deal with increasing rail traffic speeds. The slender nature of the slab panel due to its reduced depth of construction makes it susceptible to vibration problems. The aim of the study is driven by the need to address the limited research available to date on the dynamic behaviour of steel-concrete composite slab panels for track support. Free vibration analysis of the track slab has been carried out using ABAQUS. Both eigenfrequencies and eigenmodes have been extracted using the Lanczos method. The fundamental natural frequencies of the slab panel have been identified together with corresponding mode shapes. To investigate the sensitivity of the natural frequencies and mode shapes, parametric studies have been established, considering concrete strength and mass and steel's modulus of elasticity. This study is the world first to observe crossover phenomena that result in the inversion of the natural orders without interaction. It also reveals that replacement of the steel with aluminium or carbon fibre sheeting can only marginally reduce the natural frequencies of the slab panel.

• Steel and Composite Structures
• /
• 제25권4호
• /
• pp.427-442
• /
• 2017

This paper presents unprecedented damped oscillation behaviours of a precast steel-concrete composite slab panel for track support. The steel-concrete composite slab track is an innovative slab track, a form of ballastless track which is becoming increasingly attractive to asset owners as they seek to reduce lifecycle costs and deal with increasing rail traffic speeds. The slender nature of the slab panel due to its reduced depth of construction makes it susceptible to vibration problems. The aim of the study is driven by the need to address the limited research available to date on the dynamic behaviour of steel-concrete composite slab panels for track support. Free vibration analysis of the track slab has been carried out using ABAQUS. Both undamped and damped eigenfrequencies and eigenmodes have been extracted using the Lancsoz method. The fundamental natural frequencies of the slab panel have been identified together with corresponding mode shapes. To investigate the sensitivity of the natural frequencies and mode shapes, parametric studies have been established, considering concrete strength and mass and steel's modulus of elasticity. This study is the world first to observe crossover phenomena that result in the inversion of the natural orders without interaction. It also reveals that replacement of the steel with aluminium or carbon fibre sheeting can only marginally reduce the natural frequencies of the slab panel.