• JOURNAL OF ELECTRICAL WORLD
• /
• no.1 s.85
• /
• pp.78-80
• /
• 1984

• Journal of Applied Reliability
• /
• v.15 no.1
• /
• pp.12-18
• /
• 2015

TRIZ is one of the most famous tools for creative problem solving. However, it is said that TRIZ is complicated and difficult to understand and apply to solve problems. In order to resolve these difficulties, this paper presents S-ARIZ, a simplified ARIZ(the algorithm for inventive problem solving). S-ARIZ revised ARIZ-85C on two ways. First, cause and effect analysis is used to define core technical contradictions and control parameters for the physical contradictions. Second, we add 5 inventive principles which revised SIT(systematic inventive thinking) partially to IFR-1 definition (Step 3-2 of ARIZ-85C) to solve the intensified technical contradictions systematically and effectively. It is expect that S-ARIZ can contribute to the rapid spread of TRIZ.

• Journal of Arbitration Studies
• /
• v.22 no.1
• /
• pp.111-130
• /
• 2012

Judgment on the validity of patents on the subject of an arbitration does not. In other words, the occurrence of patents generated by the administrative action, and such administrative action by an authorized agency may be treated as legitimate until it is canceled. However, recent Supreme Court judgment on novelty and inventive step as well as judgments about the validity of the patent also made possible by the judiciary. This progress even in the mediation of an arbitral award which is premised on the validity of patents can be seen that possible. However, if the arbitration by an arbitrator if possible a certain portion of the limit exists. In other words, the effect of arbitration between the parties is valid. This patent is valid and invalid in arbitration even if the judgment relative to the effect ceases. In addition, the arbitration award and patent invalidation trial is in progress at the same time, if you consequently will reach a different conclusion. This can cause problems of double track. In addition, by extending the critical target recognition and enforcement in other countries can cause problems. Despite these problems, now about the validity of patents that it is possible intervention is necessary to discuss again.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.1
• /
• pp.33-39
• /
• 2020

In this research, Many people understand that the (accidental) tip and the "analogy" that leads to it have played a central role in many instances of creative problem solving.And it has been pursued as a way to get more hints to make a 'knowledge base' which is a collection of many cases. The Unified Systematic Inventive Thinking (USIT), which makes it easier to apply TRIZ, will seek out various ideas through a process of analyzing the current system and examining the ideal system more clearly. In this paper, we describe the rationale and application procedure of the "6 step thinking method" which improves the "4 step thinking method".

• Electronics and Telecommunications Trends
• /
• v.12 no.6 s.48
• /
• pp.136-149
• /
• 1997

본고에서는 발명명세서의 질적향상을 도모하고 진보성에 대한 거절을 명세서 작성시부터 극복함을 통해 권리획득 기간을 줄이기 위하여 특허의 요건인 진보성에 대하여 그 개념파악과 특허청 심사실무를 검토하고 그 대책을 강구하였다. 결국, 출원 명세서의 내용이 목적, 구성, 효과 측면에서 목적의 특이성과 구성의 곤란성, 효과의 현저성이 진보성 있는 발명임을 고려하여 해당기술분야 통상의 지식을 가진 제3자가 용이하게 알 수 있도록 해야 하며, 선행기술을 조사 분석하여 인용예가 발생하지 않도록 주의를 기울여야 할 것이다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.1
• /
• pp.50-56
• /
• 2010

This paper presents a new design algorithm for piece-removing dynamical system, based on 6-Sigma DMADOV technique using ARIZ and Brainstorming. Our design target is the piece-removing system installed on a mobile platform of bead-grinding equipment. The 6-Sigma DMADOV technique guides us design process according to 6 steps, i.e., Define - Measure - Analyze - Design - Optimize - Verify. A Design strategy to reduce the weight of piece-removing dynamical system will be explored by using ARIZ, i.e.,(the abbreviation of Algorithm for Inventive Problem Solving in Russian). The ARIZ will result in a final solution that the height and angle control parts for a cutting tool should be replaced by a kinematical approach, rather than complicated mechatronic approach(using motors). The Optimize step is composed of two sub-steps: (i) Generating process for obtaining several ideas of piece-removing system by using Brainstorming technique, satisfying the final solution derived from the Design step using ARIZ, and (ii) Optimizing process for selecting the most optimal idea of piece-removing system by using Pugh's matrix from the viewpoints of weight, cost and accuracy. The laststep of Verify has shown that the final design obtained by the 6-Sigma DMADOV technique with ARIZ & Brainstormingcan improve an initial design with design requirements satisfied. In this paper, we have shown that ARIZ and Brainstorming can be cooperatively merged into 6-Sigma DMADOV to give us both a formulatedproblem-solving approach and diverse candidate solutions(or ideas) without trial-and-error efforts.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.6
• /
• pp.461-465
• /
• 2007

There have been 3E problems of energy, economy and environment since the earth has its history. Especially, the energy and environment problems have been getting serious after the modem industry revolution. Therefore, the demand of gas as an eco-friendly energy source is getting increased. With the demand of gas, the installation and use of gas boiler is also increased, so human life injury by the waste gas(CO) of boiler goes on increasing every year. It is the content about a life of the exhaust tube which is used at Gas boiler in this paper. We explain also the course to apply the 6SC(6 Step Creativity)of practical TRIZ and evaluate the resolution.

• Journal of Power System Engineering
• /
• v.19 no.2
• /
• pp.15-21
• /
• 2015

Bollard installed on the street is a facility that protects pedestrians by restraining cars from entering on the sidewalk. It is basically classified into manual, semiautomatic, automatic type and mostly manual type is widely used because the automatic type is imported and much expensive. However, in case of manual handling type in practice, it is very troublesome and difficult to remove it whenever cars are permitted, and in case of automatic type, since underbody of a bollard is very long, it is difficult to dig a deep hole in the ground because a pipe, a hose or a cable is under the surface. In order to reduce these difficulties, this paper proposed new design of the multistage bollard that moves up and down automatically by using hydraulic system. This is developed by 6 step creativity of TRIZ inventive problem solving and structural analysis. The developed bollard can be installed in shallow hole and allow entry of vehicles through up-and-down movement without its removal manually. Finally, we could see smoothly motion through the manufactured bollard.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.1
• /
• pp.59-65
• /
• 2008

There are no products, systems to manage health and detect security for infant, the old and the weak in Korea. Recently, the concerns of parents are increasing more about all of children(baby, infant, etc) because rate of birth is decreasing gradually. Also, the average span of human life is on an increasing trend according to well-being and evolution of medical treatment. Therefore, this treatise analyzed problems in managing and following-up infant, the old and the weak at present. By using TRIZ to solve problems, we devised new conceptional ideas, detail designs to manage health, detect security, cope with correspondences for them and developed the prototype and tested it. Excellent performances are proved through various field test.

• Journal of Legislation Research
• /
• no.41
• /
• pp.201-228
• /
• 2011

In 97hu2200, the Supreme Court of Korea suggested five requirements to apply the doctrine of equivalents, i.e. identity of problem-solving principles, interchangeability, ease of interchangeability, exception of known arts and file-wrapper estoppel. There have been arguments on whether the standard of ease of interchangeability could be regarded as the same as the obviousness standard in deciding patentability. The side who thinks that they are different (hereinafter, the side of difference) considers that the standard of ease of interchangeability is narrower than the obviousness standard. This side criticizes the side who thinks that they are the same each other (hereinafter, the side of the same) on the reason that doctrine of equivalents can be overly expanded. On the other hand, 'the side of the same' argues that every accused invention having no inventive step from the perspective of the patented invention should be considered to infringe. 'The side of the same' points that if the standard of ease of interchangeability is considered as narrower than the obviousness standard, 'grey area' should exist where the patent law cannot work. The difference between the two side may cause contradictory results in the decision of infringement under the doctrine of equivalents. Because 'the side of difference' construes claims narrowly than 'the side of the same,' an accused invention in the grey area is not regarded to infringe. 'The side of the same,' however, considers the accused invention to fall into the scope of the patent under the doctrine of equivalents. This paper concludes that the standard of ease of interchangeability should be regarded as the same as the obviousness standard from the perspective of economics of innovation.