• 제목/요약/키워드: interleaving

검색결과 257건 처리시간 0.021초

Interleaving DCT를 이용한 JPEG 이미지의 블록킹 현상 감소 (Blocking Effect Reduction in JPEG Image using Interleaving DCT)

  • 하근희;김도년;조동섭
    • 한국지능시스템학회:학술대회논문집
    • /
    • 한국퍼지및지능시스템학회 1998년도 춘계학술대회 학술발표 논문집
    • /
    • pp.153-156
    • /
    • 1998
  • JPEG은 정지 영상의 압축 표준으로 8$\times$8 블록을 기반으로 DCT 변환을 한 후 양자화 및 엔트로피 부호화 과정을 통해 압축이 이루어진다. DCT는 이미지를 공간 영역에서 주파수 영역으로 변환하는 기법으로 대체로 저주파 성분은 저주파 성분끼리, 고주파 성분은 고주파 성분끼리 모아준다. 이러한 형태는 필요 없는 성분들을 쉽게 제거할 수 있어 압축이 효율적으로 이루어지도록 한다. 블록 기반의 압축 기법을 적용할 때 흔히 나타나는 문제점은 블록 기반으로 인해 발생하는 블?킹 현상으로서 이는 양자화로 인한 정보의 손실에서 비롯되며 그 기본이 되는 8$\times$8 블록 단위로 나타난다. 본 연구세어서는 작은 블록 단위를 16$\times$16의 매크로블록으로 확대한 개념을 이용하여 매크로 블록 내의 수직 및 수평 방향으로 1:2단위로 샘플링한 4개의 8$\times$8블록 간의 블록킹 경계로 없애 주도록 하고자 한다. 또한 16$\times$16의 DCT 블록 대신 16$\times$16 블록내의 8$\times$8 블록들을 이용함으로써 표준 기법에서 이용되는 8$\times$8 단위의 양자화 테이블이나 RLE기법 등을 그대로 적용할 수 있다.

  • PDF

유선 케이블 모뎀의 FEC 성능평가 (Error Performance Analysis of a FEC for the Cable Modem)

  • 이창재;김경덕;최형진
    • 한국통신학회논문지
    • /
    • 제26권11A호
    • /
    • pp.1803-1811
    • /
    • 2001
  • 본 논문에서는 미국의 유선 케이블 모뎀 규격인 MCNS(Multimedia Cable Network System) DOCSIS(Data Over Cable Service Interface Specification)를 만즉하는 하향 채널의 64/256-QAM 수신부 FEC(Forward Error Correction)를 분석하였다. FEC는 기본적으로 RS(Reed-Solomon) 계층과 TCM(Trellis Coded Modulation) 계층으로 구분되며, 여기에 추가적으로 interleaving과 randomizer 계층들이 결합되어 있다. AWGN(Additive White Gaussian Noise) 환경에서의 BER(Bit Error Rate) 성능평가를 통해 수신부 연판정 비터비 복호기(soft Viterbi decoder)의 추적 깊이(trace-back depth)와 양자화 레벨(quantization level)의 크기에 따라 부호화 이득이 변함을 확인하였다.

  • PDF

펄스다중화 보조회로를 이용한 36-펄스 Back-to-Back 전압원 컨버터의 직류송전 적용연구 (Study on 36-pulse Back-to-Back Voltage Source Converter with Pulse-Interleaving Auxiliary Circuit for HVDC Application)

  • 백승택;최준영;한병문
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제55권3호
    • /
    • pp.102-108
    • /
    • 2006
  • This paper proposes a 36-pulse back-to-back voltage source converter using four sets of 12-pulse bridges with pulse-Interleaving auxiliary circuit. The proposed back-to-back voltage source converter has an independent control capability of active power and reactive power at the at connection point. The principle of increasing the number of pulses was analyzed using theoretical approach. The operational feasibility of proposed system was verified through computer simulations with PSCAD/EMTDC software. The proposed back-to-back converter can be widely used for the HVDC and FACTS devices.

역률과 전류 리플을 개선한 인터리브 AC/DC 컨버터에 관한 연구 (A Study of Interleaved AC/DC Converter to Improved Power Factor and Current Ripple)

  • 서상화;김용;권순도;배진용;엄태민
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
    • /
    • pp.152-155
    • /
    • 2009
  • In high power application, PFC(Power Factor Correction) pre-regulators are generally required. PFC pre-regulators could achieve unity power factor, reduce line input current harmonics and utilize full line power. Interleaving PFC converters could reduce input ripple current, output capacitor ripple current and inductor size. With this closed loop interleaving method, both two phase converters are working at the boundary between continuous and discontinuous mode and accurate 180 degree phase shift is achieved. Implementation of this strategy could be easily integrated to the control chip. Finally, experimental results of a two-phase interleaved boost PFC are presented to verify the discussed features.

  • PDF

펄스다중화 보조브리지회로를 이용한 새로운 구조의 36-펄스 전압원 컨버터 (New Configuration of 36-pulse Voltage Source Converter Using Pulse-Interleaving Auxiliary Bridge Circuit)

  • 한병문;백승택;전영수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.31-35
    • /
    • 2004
  • This paper proposes a new configuration of 36-pulse voltage source converter which consists of two 6-pulse bridges and a pulse-interleaving auxiliary circuit. The system topology of proposed converter was derived to increase the pulse number of converter output voltage without increasing the number of 6-pulse bridges. The gate pulse generation was analyzed using the theoretical approach of multi-pulse switching converter. The operational feasibility of proposed system was verified by computer simulations with PSCAD/TMTDC software and experimental works with 3kVA hardware prototype. The proposed converter can be widely used for the uninterruptible power supply, the power quality compensator, and the distributed power generation, such as solar and fuel fell power system.

  • PDF

Digitally Controlled Interleaving Tapped-Inductor Boost Converter for Photovoltaic Module Integrated Converters (PV MIC)

  • Lee, Jye-June;Kim, Jitae;Bae, Hyunsu;Cho, B.H.
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2010년도 추계학술대회
    • /
    • pp.74-75
    • /
    • 2010
  • As global warming due to burning fossil fuels and natural resource depletion issues have emerged, the development of renewable energy sources such as photovoltaics (PV) has been brought to recent interest. Amongst the vast efforts to harvest and convert solar energy into electricity, the module integrated converters (MIC) has become a worthy topic of research for grid-connected photovoltaic systems. Due to the required high-boosting qualities, only a restricted amount of DC/DC converter topologies can be applied to MICs. This paper investigates the possibility of a tapped-inductor boost converter as a candidate for PV MICs. A dual-inductor interleaving scheme operating slightly above the boundary of the two conduction modes (BCM) is suggested for reduction of input current ripple and minimization of component stress. A digital controller is used for implementation, assuring maximum power tracking and transfer while providing sufficient computational space for other grid connectivity applications, etc. For verification, a 200W converter is designed and simulated via computer software including component losses. High efficiency over a wide power range proves the feasibility of the proposed PV MIC system.

  • PDF

통신용 DSP를 위한 비트 조작 연산 가속기의 설계 (Design of Bit Manipulation Accelerator fo Communication DSP)

  • 정석현;선우명훈
    • 대한전자공학회논문지TC
    • /
    • 제42권8호
    • /
    • pp.11-16
    • /
    • 2005
  • 본 논문은 스크램블링(Scrambling), 길쌈부호화(Convolutional Encoding), 펑처링(Puncturing), 인터리빙(Interleaving) 등과 같은 연산에 공통적으로 필요한 비트 조작(Bit Manipulation)을 효율적으로 지원하기 위한 비트 조작 연산 가속기를 제안한다. 기존의 DSP는 곱셈 및 가산 연산을 기본으로 연산기가 구성되어 있으며 워드 단위로 동작을 함으로 비트 조작 연산의 경우 비효율적인 연산을 수행할 수밖에 없다. 그러나 제안한 가속기는 비트 조작 연산을 다수의 데이터에 대해 병렬 쉬프트와 XOR 연산, 비트 추출 및 삽입 연산을 효율적으로 수행할 수 있다. 제안한 가속기는 VHDL로 구현 하여 삼성 $0.18\mu m$ 표준 셀 라이브러리를 이용하여 합성하였으며 가속기의 게이트 수는 1,700개에 불과하다. 제안한 가속기를 통해 스크램블링, 길쌈부호화, 인터리빙을 수행시 기존의 DSP에 비해 $40\~80\%$의 연산 사이클의 절감이 가능하였다.

동적 셔플링을 이용한 MPEG기반의 동영상 암호화 방법에 관한 연구 (A Study on Video Data Protection Method based on MPEG using Dynamic Shuffling)

  • 이지범;이경학;고형화
    • 한국멀티미디어학회논문지
    • /
    • 제10권1호
    • /
    • pp.58-65
    • /
    • 2007
  • 본 논문에서는 MPEG 기반의 동영상 데이터를 보호하기 위한 알고리즘을 제안하였다. 기존의 고정된 셔플링 테이블을 사용하는 단순 전치 암호화의 경우 계산량이 적은 반면에 선택적 평문 공격에 취약한 난점을 가지고 있다. 이러한 단점을 보완하기 위해서는 프레임 단위로 셔플링 테이블을 동적으로 생성해야 하는데 이 경우, 동적인 셔플링 테이블 생성 시간과 키를 관리하는 것이 문제가 된다. 이러한 문제를 해결하기 위해 영상의 특징에 따라 적응적으로 변하는 인터리빙 알고리즘을 제안하고 이를 이용하여 DPCM 처리된 8*8 블록을 셔플링하여 일차적으로 영상을 스크램블링한 후 기존의 랜덤 셔플링 테이블을 이용하여 최종적으로 영상을 암호화하였다. 실험 결과 기존의 SEED를 이용한 암호화 방식에 비해 수행 시간이 약 10% 정도에 불과했고 암호화에 따른 압축률 감소 등의 문제는 보이지 않았다. 동영상 암호화는 인트라 프레임에 대해서는 정지영상과 통일한 방식의 암호화 방법을 적용하고 예측 프레임에서는 DC 계수 및 AC 계수에 비해 상대적으로 데이터량이 적으면서 암호화 효과가 좋은 움직임 벡터를 대상으로 암호화하였고 예측 프레임내의 인트라블록에 의한 암호화 효과가 떨어지는 것을 방지하기 위해 매크로 블록 셔플링 알고리즘을 이용하였다.

  • PDF

PMSS 시스템에서 서버/클라이언트 간 서비스 모델의 성능분석 (Performance Analysis of Service Model between server and client on PMSS System)

  • 이민홍;김경훈;남지승
    • 정보처리학회논문지A
    • /
    • 제11A권3호
    • /
    • pp.207-212
    • /
    • 2004
  • 본 논문은 단일 주문형 비디오 환경에서의 서버/클라이언트 미디어 서비스 모델을 분석하고 이를 병렬 주문형 비디오 환경에 적용함으로써 보다 나른 사용자 QoS(Quality of Service)를 제공하고자 한다. 미디어 서비스 모델로는 클라이언트가 데이터를 요청하고 서버가 전달해주는 Client Pull 모델과 서버 측에서 일방적으로 데이터를 전달해 주는 Server Push 모델 그리고 두 모델을 통합한 IPP(Interleaving Pull & Push) 서비스 모델로 크게 나뉜다. 병렬 주문형 비디오 환경을 위해 병렬형 미디어 스트리밍 서비스, 즉 단일 클라이언트를 위해 다수의 서버들이 동시에 서버에 참여하는 PMSS(Parallel Media Streaming Service) 시스템을 구축하였으며, 단일/병렬 주문형 비디오 환경에서 네트워크상 전달지연과 클라이언트 버퍼 내 데이터 잔여량 인자를 통하여 각 서비스 모델간 성능을 비교 분석하였다. 실험을 통해 병렬 주문형 비디오 환경에서 IPP 서비스 모델이 가장 적은 전달지연과 안정적인 클라이언트 버퍼를 유지함을 알 수 있었다. 이를 통해 사용자에게 보다 나은 서비스를 제공할 수 있음을 확인하였다