• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.544-558
• /
• 2017

The objective of this research is to investigate preservative efficacy for refractory species in field tests. The field tests were set up to evaluate the preservative performance of western hemlock and white spruce preservative-treated to the residential products group C and D of Canadian standard (CSA O80 Series-08) that have been developed for residential use in above-ground and ground-contact conditions, respectively. They were incised and pressure-treated with alkaline copper quaternary (ACQ) or copper azole (CA). Treated samples for the ground contact stake test and ground proximity test were installed in Jinju, Korea on November 2010 according to AWPA E7-09 and AWPA E18-06, respectively. Each sample has been annually assigned ratings for decay and termite attack, based on AWPA E7 grading system. After six years and five months of exposure, the untreated samples showed decay and particularly severe damage by termite attack but all the preservative-treated samples showed no decay. The results showed that the 5-mm penetration depths may be applicable for the treatment of refractory species. This paper discusses what to consider for the use of refractory species in Korean wood preservation industry from the penetration and retention points of view.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.562-570
• /
• 2018

New physical properties of polymer materials were obtained by blending two or three different type of polymers. TPE is used widely in the display, automotive and electronics industries. Consumers have sought emotionally more sensitive and advanced interior automotive parts. A polymer with high foamibility (Ed note: Please check this.) and flowability would be more plausible. TPE composed of foam is a good polymer material to satisfy these trends. In this research, two different TPE were tested, focusing on foamibility and flowability. Two type of TPE were prepared. The first was blended Homo-PP, oil and SEBS. The second was Co-PP, oil and SEBS. The blending temperatures were $180^{\circ}C$, $190^{\circ}C$, and $260^{\circ}C$(second one). The blending speed was 50rpm and blending time was 5 min. The MI of the blended material was affected by the MI of PP and not affected by the blending temperature. The hardness and tensile elasticity were less affected by the MI of PP and blending temperature. The hardness and tensile elasticity were lower at a higher SEBS/Oil content ratio. The soft touch feel was higher with high SEBS/Oil contents. The IPN (Interpenentration polymer network) structure was observed by dissolving the SEBS/Oil layer in xylene. Strain-hardening phenomena also was observed. TPE behaves in a rubber and foamed closed-cell improved its stability.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.430-439
• /
• 2016

Medicine herb residues boards were manufactured by using medicine herb residues, and emission properties of volatile compounds from boards were examined under various temperature conditions. The volatile compounds were identified with analysis of TD GC/MS by absorbing their flavor components in Tenax tubes. Total 88 volatile compounds were identified from the board. The number of identified compounds at temperature conditions of $25^{\circ}C$, $35^{\circ}C$, and $45^{\circ}C$ were 44, 55, and 65 kinds, respectively. The number of volatile compounds and the total peak area tended to increase with an increase in the temperature. The number of the flavor components detected in all temperature conditions were 34 kinds. Hydrocarbon compounds showed 93% of the detected flavor compounds at $25^{\circ}C$, 92% at $35^{\circ}C$, and 90% at $45^{\circ}C$. Ether compounds accounted for 4% and ketone, aldehyde, and acid-type compounds were detected in a small quantity. The hydrocarbons were composed of 17 kinds of monoterpenes and 39 kinds of sesquiterpenes, which accounted for 11% and 80%, respectively. The most detected compound of monoterpene was limonene, and the major flavor components of sesquiterpenes were ${\alpha}-curcumene$, zingiberene, ${\beta}-elemene$, ${\beta}-selinene$, ${\alpha}-amorphene$, and ${\alpha}-copaene$. Anethole (3.26%) known for ether compounds was detected considerably in all temperature conditions. The results suggest that the manufactured medicine herb residues board include various types of flavor compounds and the flavor compounds might be useful for the manufacture of various products.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.313-320
• /
• 2012

A dental treatment room is always exposed to diverse kinds of pathogenic bacteria, and may be a mediating place of cross-infection given being contaminated the interior of a room through several routes in the form of patient's secretion and aerosol. The main agent of preventing cross-infection is a dental hygienist in the dental treatment and the dental treatment room where are scattered about a risk of cross-infection. A dental hygienist needs to have right recognition on infection control before being active as a clinical expert. This infection-control recognition level is influenced from the clinical practice. Accordingly, to survey recognition of infection control, a self-administered questionnaire research was conducted targeting 314 students who are fixed the clinical practice as regular subject in the junior course out of curriculum for the Department of Dental Hygiene at some of 4-year universities. Data collection was performed from December 9, 2011 to February 22, 2012. Except 11 copies of questionnaire with insincere response among the collected materials, 303 copies were finally analyzed by using SPSS WIN 20.0. The following conclusions were obtained. In the infection disease section, both on and off campus showed 4.89 points from 'the importance of recognizing the infections prevention', 4.65 points from 'recognizing the compulsory preventative injection for hepatitis type B', 4.77 points from 'recognizing the necessity of the preventative injection for hepatitis type B', 4.71 points from 'whether practice the prevention in reality or not', and 4.76 points from 'the educational helps to the prevention'. In other words, the section recorded the highest and meaningful points. It is considered to be needed the development in systematic and diverse infection-control educational programs and the differentiated education depending on school year for dental hygiene students.

• Journal of the Korean Society of Costume
• /
• v.55 no.5 s.95
• /
• pp.108-119
• /
• 2005

The objective of the study is was investigate the condition of the battle dress uniform worn by male members of the Korean Police Special Weapons Attack Team(KP-SWAT), identify problems, and provide basic raw materials for developing improved design of BDU. For this purpose, the researcher conducted a questionnaire survey on 92 male members of SWAT (Special Weapon Attack Team) units in Seoul using a questionnaire developed through observation and interview. Also, the body sizes of male SWAT members were measured. According to the results of body size measurements, male SWAT members generally require uniforms with a target bust girth, armhole, biceps circumference, thigh and calf circumference, longer jacket length, sleeve length, and trouser length to the knee. According to the results of the questionnaire survey, they reported dissatisfaction with the fit. In addition, they said that the Pockets are positioned too low for convenient use. Many subjects reported that their trousers were too short because of the rubber rings at the bottom of the legs. In addition, many subjects requested the alteration of the inconveniences caused by the designs finished with velcro on the bottom collar of the upper uniform, the marks and ensigns of the upper uniform, the bottom of the upper and lower uniform, and several pockets. Furthermore, there were many complaints concerning how they had to wear their uniform. The most frequently worn out and the body parts most often injured in field training and operations, they were reported, on the upper uniform, as the elbow, collar, neck, armpit, shoulder, and sleeve hem in that order, and on the lower uniform, the knee, interior calf, waist (belt rings), buttocks (rear pockets), and the bottom of the trousers (ankle) in that order As for questions concerning priorities in the improvements of the operational uniform and preferred design, the subjects recommended improvement in safety (protectiveness), workability (motional flexibility), design (shape), fit (size), comfort, ease in terms of putting on and taking off, etc., and the majority preferred two-piece designs ($67.4\%$), followed by one-piece ($30.4\%$), or both ($2.2\%$).

• Horticultural Science & Technology
• /
• v.31 no.4
• /
• pp.447-456
• /
• 2013

This study was carried out for the establishment of theory and foundational data for breeding, on variegated foliage plants using for potted plants, based on examination and analysis for shape, color, and area ratio of variegated leaves and chlorophyll contents. Six families, 18 genus, and 54 species of variegated plants domestically distributed in Korea were used as the plant materials. Patterns based on chlorophyll-deficient part in variegated leaves were divided into 20 types, such as steps, border, collapsed border, sandy border, half, silk, stars, vein, firewood, border and firewood, center, entirety, leaf, irregular, net, watermelon, melon, and so on. There were 10 kinds of colors including dark green, red, dark red, reddish white, reddish yellow, white, silver, silvery white, yellowish white, and yellow. The ratio of variegated area was ranged from 5.8% to 100% and it was diverse depending on species or cultivar. The ratios by patterns were highest in entirety (98.6%) and relatively high in step (60.8%), whereas, low in boarder, star and firewood (33.6-36.4%), and relatively low in half and vein (43%). Chlorophyll content of variegated leaf was rather lower compared to normal plants and chlorophyll b tended to be higher in ratio of chlorophyll a to b. Particularly content of chlorophyll b in Stromanthe sanguinea 'Triostar', Dracaena fragrans 'Massangeana Compacta', D. reflexa 'Song of India', and Tradescantia spathacea was higher than chlorophyll a in comparison with that of normal plants.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.39-45
• /
• 1995

The plywoods commonly used as decorative interior materials for the construction are inflammable and so it is a causative factor for making fire accidents, resulting in the destruction of human life and personal properties. Indeed, it is, therefore, required to produce fire-retardant plywoods. In this study, a special grade of defect-free, Kapur plywood was used. Specimens were cut into 3- by 20cm dimensions from 120- by 240- by 0.33-cm panels(thin panel) or 120- by 240- by 0.5-cm panels(thick panel). Some specimens were treated with diammonium phosphate(DAP), but some were not treated with diammonium phosphate to use as control panels. Chemical absorption, drying curves, drying rates and dynamic Young's modulus were investigated. The results were summaries as follows; 1. The specimens were soaked into 19% diammonium phosphate solution by a full cell pressure process and the diammonium phosphate retained in the thin and thick plywoods was 1.409kg/$(30cm)^3$, 1.487kg/$(30cm)^3$, respectively. 2. Diammonium phosphate-treated plywoods were redried with press-drying process at one of either condition dried on the platen($115^{\circ}C$) for a period of time or dried on the platen($50^{\circ}C$) for 3 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. or dried on the platen($60^{\circ}C$) for 2 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. The drying rate of treated thin specimens dried at $60^{\circ}C$ plus $30^{\circ}C$ and $115^{\circ}C$ only was found to be 0.04 %/min. and 8.53 %/min. Similarly, the drying rate of treated thick specimens were 0.03 %/min. and 6.77 %/min. respectively. 3. It was evident that highly-significantly different drying rate of treated plywoods was observed between plywood thicknesses and platen temperatures and the rate was increased by elevating the platen temperature up to $115^{\circ}C$. Based on the two-way variance analysis, highly significant drying rate was observed from the interaction between plywood thicknesses and platen temperatures. 4. After redrying, the specimens were weighed and reconditioned to a constant weight in a facility maintained temperature ($20^{\circ}C$) and relative humidity(65%) prior to test dynamic Young's modulus. The test revealed that the thin specimens dried at the platen temperature of $50^{\circ}C$, $60^{\circ}C$, $115^{\circ}C$ and untreated specimens showed 1.070E+09 dyne/$cm^2$, 1.156E+09 dyne/$cm^2$, 1.243E+09 dyne/$cm^2$, and 1.052E+09 dyne/$cm^2$, respectively. Likewise, the thick specimens revealed 5.647E+09 dyne/$cm^2$ 5.670E+09 dyne/$cm^2$, 6.395E+09 dyne/$cm^2$ and 5.415E+09 dyne/$cm^2$, respectively. 5. It was evident that significantly different dynamic Young's modulus was observed between the plywood thickness and the platen temperature, but not in the two-way interaction between the plywood thickness${\times}$the platen temperature.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.6
• /
• pp.370-377
• /
• 2012

This study was conducted to investigate the color change of heat-treated wood made of Korean pine (Pinus koraiensis S. et Z.), and lodgepole pine (Pinus contorta Dougl). The wood samples were heat-treated at 9 different treatment combinations of temperature (170, 180, 200, 220, and $230^{\circ}C$), and time (90, 120, 180, 240, 270 min.) set up by a response surface method. Wood color was measured using a colorimeter, and the samples were installed for evaluating the resistance of termite in the field test sites set up in Jinju. The lightness decreased with the increase of treatment temperature and treatment time. The color differences were evaluated by the method of National Bureau of Standards (NBS), and response surface models to predict the color change were fitted as a function of treatment temperature and treatment time. The $R^2$ values of the fitted models of heat-treated Korean pine and lodgepole pines were 0.92, and 0.88, respectively, showing the potential way for the prediction of color changes. Severe damage was found from the samples in the field test site, which means that the manufactured heat-treated wood did not show the termite resistance enough for the outdoor use.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.538-547
• /
• 2011

In this study, eco-friendly hybrid composite boards were manufactured from green tea and wood fibers for application as interior materials with various functionalities of green tea and strong strength properties of wood fibers. In this relation, the effect of green tea content on dynamic MOEs (modulus of elasticity) of these green tea and wood fibers composite boards were investigated. The dynamic MOEs of hybrid composite boards were lower than those of control boards without green tea, and the values decreased with the increase of green tea content. Also, the dynamic MOEs appeared to be somewhat different by resin type used for board manufacture. The hybrid composite boards manufactured from $E_1$ grade urea resin, which has higher molar ratio of formaldehyde to urea than that of $E_0$ grade one, were 1.06~1.54 times higher than that manufactured from $E_0$ grade. And, the differences between hybrid composite boards manufactured from both adhesive increased with the increase of green tea content. On the other hand, high correlations were found between dynamic MOE and static bending strength performances, it was concluded that static bending strength performances could be estimated from the dynamic MOE, except for a few hybrid board types with large variations.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.145-149
• /
• 2004

It is necessary for managing a perfect process for degasing aluminum molten metal according to the increase of a grade of aluminum and its alloy products. There are some methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals supplier and input method that supplies argon and nitrogen, or chlorine gas by using a gas blow-tube. However, these methods show some problems, and it shows that it is a difficult process to handle. pollution due to the producing a lot of toxic gases like chlorine and fluoride gas. irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are the most fatal are the producing a lot of sludge due to the reaction of aluminum molten metal with chemicals. loss of metals, and decreasing the life of refractory materials. In order to solve these problems. this paper develops a technology that is related to aluminum continuous casting molten metal and monolithic degasing apparatus. A degasing apparatus developed in this study improved the exist ing methods and prevented environmental pollution wi th smokeless. odor less, and harmlessness by using a new method that applies argon and nitrogen gas in which the methods used in the West and Japan are eliminated. The developed method can significantly reduce product faults that are caused by the production of gas and oxidation because it uses a preprocessed molten metal with chemicals. In addition. the amount of the produced sludge can also be reduced by 60-80% maximum compared with the existing methods. Then. it makes it possible to minimize the loss of metals. Moreover. the molten metal processing and settling time is also shortened by comparing it with the existing methods that are applied by using chemicals. In addition, it does much to improve the workers' health, safety and environment because there is no pollution. The improvement of productivity and prevent ion effects of disaster from the results of the development can be summarized as follows. It will contribute to the process rationalization because it does not have any unnecessary processes that the molten metal will be moved to an agitator by using a ladle and returned to process for degasing like the existing process due to the monolithic configuration. There are no floating impurities due to the oxidation caused by the contact with the air as same as the existing process. In addition. it can protect the blending of precipitation impurities. Because it has a monolithic configuration. it can avoid the use of additional energy to compensate the temperature decreasing about 60t that is caused by the moving of molten metal. It is not necessary to invest an extra facilities in order to discharge the gas generated from a degasing process by using an agitator. The working environment can be improved by the hospitable air in the factory because the molten metal is almost not exposed in the interior of the area.