• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.4
• /
• pp.133-139
• /
• 2022

This study deals with the formation of Jongyeonbangjeok's Gwangju Factory in the 1930's to 80's, and the findings are shown below: In the period of formation, the factory was rectangular-shaped from north to south, and the structure was located at the center of the site, and in the east of it, there was a dormitory connected from south to north. The building was arranged with an open area on the south. In the east of the site where company houses were located, same-sized structures were arranged along the axis.In the period of change, the factory was restored about the damage from the Korean War, and it went through the process of division into two companies. As a result, the factory in the center of the site was divided into left and right ones, and the dormitory and the group of company houses were, too, divided into two, so division was made largely into southern and northern parts. In the period of stabilization, along with factory extension in each of the companies, welfare for factory workers was expanded by building more houses or opening sport facilities. After the 1980's, too, the existing factories were either extended or remodeled according to the induction of equipment, and some showed changes in their functions due to a fire or such.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.35-42
• /
• 2019

The aim of this study is to investigate the direction of improvement of safety experience education through the analysis of the evacuation time experiment. For the study, test subjects were divided into groups of similar body size and weight. The test subjects were directly experienced four evacuation devices, and the experience time was measured. As a result of the analysis of the total time from the installation of the evacuation device to the escape, the time was measured in the order of Descending Life Line-Tilt-Down Rescue Line-Vertical Escape Chute-air safety mat. In the case of evaluating the evacuation time using evacuation mechanisms, the evacuation time was measured in the order of air safety mat-Tilt-Tilt-Down Rescue Line-Descending Life Line-Vertical Escape Chute. In the first and second experiments of the Descending Life Line, time differences were observed. The escape time using the Descending Life Line was reduced in the second experiment than in the first experiment. As shown in this result, education through experience has shown that behavioral confidence and time can be managed. The conclusion of this study is that the goal of safety education is to minimize human life and property damage. Therefore, in order to bring this effect to more people, it is necessary to make efforts to keep self-safe through experiential education.

• Journal of Nutrition and Health
• /
• v.51 no.5
• /
• pp.423-432
• /
• 2018

Purpose: Cataract is a major cause of a loss of eye sight, and is a critical health issue in an aging society. The oxidative stresses to the lens due to various exterior/interior stimuli leads to degenerative changes of the visual system, resulting in cataract. Therefore, reducing the level of oxidative damage is critical in the prevention of the disease. This study examined the association between the risk of cataract and intake of fruits and vegetables, the major dietary source of antioxidants. Methods: Using the data of Korean National Health and Nutrition Examination Survey 2012, the intake of fruits and vegetables of 1,332 males (222 cases) and 2,012 females (377 cases) were analyzed, taking into account the cataract phenotype. Their dietary intake was categorized in 6 groups: TV (total vegetables), F (fruits), TVF (TV+F), SV (salted vegetables), NSV (Non-SV), and NSVF (NSV+F). The level of intakes were evaluated referring to the recommendation level of various dietary guidelines. Results: The presence of cataract was associated with some type of fruit and vegetable intake. In males, the controls had more TVF (p < 0.001), TV (p = 0.001), SV (p = 0.012), NSV (p = 0.007), and NSVF (p < 0.001) intake than the cases, and the lower intake of TVF (< 500g), TV (300g), NSV (< 100g), and NSVF (< 400g) increased the risk of cataract by up to 1.7 fold [95% confidence interval: 1.06-2.71]. In females, the controls also had a higher intake of TVF (p < 0.001), TV (p = 0.042), and NSVF (p < 0.001), but the intake of such fruits and vegetables did not predict the meaningful risk of cataract. The intake of SV and F was not associated with the cataract phenotype in either males or females. Conclusion: The intake of fruits and vegetables can modify the risk of cataract in Korean males and a sufficient intake of those could be effective in the prevention of cataract.

• Herbal Formula Science
• /
• v.25 no.4
• /
• pp.553-574
• /
• 2017

The purpose of this study is to find out effects of prescriptions according to the formula, manipulation of Rhei Rhizoma, configuration. The following results were reached through investigations on the prescriptions using Rhei Rhizoma as a main component. Objectives : Analysis of prescriptions According to the formula : Liquid Extract Prescriptions were used widely on three parts to treat fever and damp heat in the interior organs. Powder Prescriptions were taken with hot water, thin porridge, tea etc. to treat damp heat, congestion of phlegm, acute episodes. Liquid Mixed Pill treat congestion of QI, damp heat, phlegm. Honey Mixed Pill treat accumulated fever, distension, acute excessive fever. Paste Pill treat blood stagnation, excessive toxic-fever, epidemic diseases. External Application treat inflammation by injury, swelling due to severe fever by internal damage. Methods : Analysis of prescriptions According to the manipulation of Rhei Rhizoma : Prescriptions including Liquor processed Rhei Rhizoma treat excessive toxic-fever, congestion of phlegm, blocking orifices on the upper side. Steamed Rhei Rhizoma strengthen effects of making evacuate and cooling of heat. Processed Rhei Rhizoma with vinegar strengthen effects of removing blood stagnation by activating blood movement, releasing gathering. Results : Analysis of prescriptions According to the Composition of Rhei Rhizoma : 41% of the total prescriptions were on the area of less than 20%. In case of lower groups show increased frequency of combination with Pharbitidis Semen, Persicae Semen, Scutellariae Radix and manipulation of baking, steaming, roasting. In case of higher groups show increased frequency of treating excess syndrome, critical illness, acute severe illness, and using proccesed Rhei Rhizoma with vinegar. Treatment of damp heat on the liver and gallbladder, disorder of the spleen and stomach is done mostly by prescriptions on the area of less than 30%. Conclusions : Rhei Rhizoma-Coptidis Rhizoma pair treat damp heat, heat toxins in blood, and Constipation caused by excessive heat. Rhei Rhizoma-Glycyrrhizae Radix pair relieve effects of Rhei Rhizoma passing blocked feces, removing the poison, activating blood movement, releasing gathering with the effects of Glycyrrhizae Radix relaxing tension by harmonizing Middle. Rhei Rhizoma-Magnoliae Cortex pair are used to treat damp heat in middle area, excessive heat in the stomach and intestine. Rhei Rhizoma-Pharbitidis Semen pair act on both blood system and QI system treating edema, damp, stagnation, heat toxins, feces. Rhei Rhizoma-Persicae Semen pair treat blood stagnation with fever on blood system.

• Journal of the Korean Institute of Gas
• /
• v.18 no.3
• /
• pp.38-43
• /
• 2014

This paper is to analyze and study the failure examples of fire by inflammables and electric contact faulty in interior of vehicle. The first example, the driver used to air freshener that remove the air conditioner bad smell. He get out of a car. And then, he put it on the crash pad. Before long, a fire breaks out because of explosion solar radiation. The second example, the driver used in room of a car. It certified the fire by disconnection phenomenon happened the electric overload. The third example, the driver install the heat rays to warm his body, In the initial stages, it didn't seek the dangerous of fire during using a car to 5,000km. This heat rays become to down durability so that produced the electric overload in an instant. The fourth example, after the man smoked the cigarette on riding with rear seat, he put it on seat in vehicle no extinguishing the burning cigarette. It knew the fact that burnt to ashes a car by on well combustible paper. Thus, the driver must consider a countermeasure for minimize the fire production when he use the inflammable and install adding electric system.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.544-558
• /
• 2017

The objective of this research is to investigate preservative efficacy for refractory species in field tests. The field tests were set up to evaluate the preservative performance of western hemlock and white spruce preservative-treated to the residential products group C and D of Canadian standard (CSA O80 Series-08) that have been developed for residential use in above-ground and ground-contact conditions, respectively. They were incised and pressure-treated with alkaline copper quaternary (ACQ) or copper azole (CA). Treated samples for the ground contact stake test and ground proximity test were installed in Jinju, Korea on November 2010 according to AWPA E7-09 and AWPA E18-06, respectively. Each sample has been annually assigned ratings for decay and termite attack, based on AWPA E7 grading system. After six years and five months of exposure, the untreated samples showed decay and particularly severe damage by termite attack but all the preservative-treated samples showed no decay. The results showed that the 5-mm penetration depths may be applicable for the treatment of refractory species. This paper discusses what to consider for the use of refractory species in Korean wood preservation industry from the penetration and retention points of view.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.2
• /
• pp.118-124
• /
• 2007

The oceans could absorb almost all the anthropogenic carbon dioxide the mankind has been producing eventually, but in the nature the air-sea $CO_2$ exchange occurs very slowly and to lower the atmospheric $CO_2$ concentration substantially $CO_2$ must be injected to the interior of the ocean directly. If we inject $CO_2$ collected at the major $CO_2$ sources into the international waters in the Philippine Sea or east of Japan, we could store the $CO_2$ in the oceans effectively for a few hundred years. When $CO_2$ is dissolved into the water, PH drops. The creatures adapted to the deep oceans where environment is very stable could be affected by even a small change in pH significantly. If, therefore, we are to inject $CO_2$ into the oceans, we must assess the effect of $CO_2$ injection in the marine ecosystem beforehand. Only when the damage to the marine ecosystem is smaller than the benefit from the $CO_2$ injection, $CO_2$ injection is effective.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.2
• /
• pp.127-134
• /
• 2020

High supersonic aircraft are exposed to high temperature environments by aerodynamic heating during supersonic flight. Thermal protection system structures such as double-panel structures are used on the skin of the fuselage and wings to prevent the transfer of high heat into the interior of an aircraft. The thin-walled double-panel skin can be exposed to acoustic loads by supersonic aircraft's high power engine noise and jet flow noise, which can cause sonic fatigue damage. Therefore, it is necessary to examine the behavior of supersonic aircraft skin structure under thermal-acoustic load and to predict fatigue life. In this paper, we designed and fabricated thermal-acoustic test equipment to simulate thermal-acoustic load. Thermal-acoustic testing of the titanium specimen under thermal-acoustic load was performed. The analytical model was verified by comparing the thermal-acoustic test results with the finite element analysis results.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.6
• /
• pp.370-377
• /
• 2012

This study was conducted to investigate the color change of heat-treated wood made of Korean pine (Pinus koraiensis S. et Z.), and lodgepole pine (Pinus contorta Dougl). The wood samples were heat-treated at 9 different treatment combinations of temperature (170, 180, 200, 220, and $230^{\circ}C$), and time (90, 120, 180, 240, 270 min.) set up by a response surface method. Wood color was measured using a colorimeter, and the samples were installed for evaluating the resistance of termite in the field test sites set up in Jinju. The lightness decreased with the increase of treatment temperature and treatment time. The color differences were evaluated by the method of National Bureau of Standards (NBS), and response surface models to predict the color change were fitted as a function of treatment temperature and treatment time. The $R^2$ values of the fitted models of heat-treated Korean pine and lodgepole pines were 0.92, and 0.88, respectively, showing the potential way for the prediction of color changes. Severe damage was found from the samples in the field test site, which means that the manufactured heat-treated wood did not show the termite resistance enough for the outdoor use.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.345-352
• /
• 2017

In this study, the effect of cryogenic liquefied natural gas leakage and loading on liquefied natural gas cargo hold is investigated to observe the performance of the polymer foam material that comprises the cryogenic insulation of the cargo hold. The primary barriers of liquefied natural gas carrier that are in contact with the liquefied natural gas will leak if damage is accumulated, owing to fluid impact loads or liquefied natural gas loading / unloading over a long period. The leakage of the cryogenic fluid affects the interior of the polymer foam, which is a porous closed cell structure, and causes a change in behavior with respect to the working load. In this study, mechanical properties of polyisocyanurate foam specimen, which is a polymer material used as insulation, are evaluated. The performance of the specimens, owing to the cold brittleness and the impregnation effects of the cryogenic fluids, are quantitatively compared and analyzed.