• Coupled systems mechanics
• /
• 제5권2호
• /
• pp.127-144
• /
• 2016

Two dimensional numerical investigations were carried out to study the influence of interface thickness and their pattern on the behavior of reinforced concrete frames subjected to in-plane lateral loads using commercial finite element tool SAP 2000. The linear elastic analysis was carried out on one and two bay structural systems as well as the influence of number of stories was studied by varying the number of stories as single, three and five. The cement mortar was used as interface material and their effect was studied by varying thicknesses as 6, 8, 10, 14 and 20 mm. The interface was recognized as one sided, two sided, three sided and four sided and their effect was studied by removing the interface material between the reinforced concrete frame and masonry infill. The effect of lateral loads on infill masonry wall was also studied by varying assumed loads as 10, 20, 30, 40, 50 and 60 kN. The behavior of infilled frames studied has revealed that there is a maximum influence of interface thickness and interface pattern corresponding to 10 mm thickness. In general, the lateral displacement of frame is increased linearly with increase in lateral loads.

• 한국전기전자재료학회논문지
• /
• 제22권5호
• /
• pp.377-381
• /
• 2009

Tetragonal-NiSi (010)/Si superstructures were calculated for studying the interface structure using density functional theory, The orthorhombic-NiSi was changed to the tetragonal-NiSi to be matched with the Si surface for epitaxy interface. The eight interface models were produced by the type of the Si surfaces, The tetragonal-NiSi (010)/Si (020)[00-1] superstructure was energetically the most favorable, and the interface thickness of this superstructure was the shortest among the tetragonal-NiSi (010)/Si superstructures. However, in the case of tetragonal-NiSi (010)/Si (010)[00-1] superstructure, it was energetically the most unfavorable, and the interface thickness was the longest. The energies and interface thicknesses of tetragonal-NiSi (010)/Si superstructures were influenced by the coordination number of Ni atoms and the bond length between atoms located at the interface.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.67-68
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.589-590
• /
• 2009

• 콘크리트학회논문집
• /
• 제14권5호
• /
• pp.668-676
• /
• 2002

바닥판은 주형 또는 하부구조 등에 비하여 손상이 많이 발생하기 때문에 탄소섬유쉬트와 같은 섬유보강재를 사용하여 손상된 바닥판의 내하력을 향상시키기 위한 성능향상 공법의 적용이 증가하고 있다. 그러나 섬유보강재와 콘크리트사이의 계면을 에폭시를 사용하여 일체화시키는 외부착공법의 특성상 하중위치 및 보강방법 등에 따라 보강재가 조기에 박리되는 현상이 발생할 수 있으며, 특히 이방향 균열의 성장에 의하여 손상이 진행되는 바닥판의 경우에는 보강된 보 구조물에서 일반적으로 발생하는 단부박리현상보다는 균열폭의 증가에 의하여 발생하는 계면박리 현상이 많이 발생하게 된다. 본 연구에서는 성능향상된 바닥판의 계면박리를 해석하기 위하여 균열폭과 부착응력의 관계로부터 계면박리가 발생하는 임계부착응력과 임계 균열을 산정할 수 있는 이론적인 해석식을 제안하였다. 또한 보강된 바닥판 시험체에 대한 정적 시험결과와의 비교를 통하여 제안식의 타당성을 검증하였다.

• 한국전산유체공학회지
• /
• 제11권1호
• /
• pp.29-35
• /
• 2006

A code is developed to analyze a spherically symmetric underwater explosion. The arbitrary Lagrangian-Eulerian(ALE) Godunov scheme for two-phase flow is used to calculate numerical fluxes through moving control surfaces. For detonation gas of TNT and liquid water, the Jones-Wilkins-Lee(JWL) equation of states and the isentropic Tait relation are used respectively. It is suggested to use the Godunov variable to estimate the velocity of a material interface. The code is validated through comparisons with other results on the gas-water shock tube problem. It is shown that the code can handle generation of discontinuity and recovering of continuity in the normal velocity near the material interface during shock waves interact with the material interface. The developed code is applied to analyze a spherically symmetric underwater explosion. Repeated transmissions of shock waves are clearly captured. The calculated period and maximum radius of detonation gas bubble show good agreements with experimental and other numerical results.

• 대한기계학회논문집
• /
• 제16권8호
• /
• pp.1458-1467
• /
• 1992

본 연구에서는 균질재에서의 결과를 토대로 이종재에서도 그 성질이 보존될 것으로 기대되기 때문에 계면균열에서의 CED의 기본적 성질을 검토한후, 각 모드 인자 의 분리법과 평가법을 CED를 통해 제시한다. 또 제시한 수법을 이용하여 우선 탄성 균열 모델에서 유한요소해석을 통해 CED 및 각 모드 인자의 평가 및 기초적 검토를 실시하여 그 유효성을 확인한다.

• 산업공학
• /
• 제12권2호
• /
• pp.319-328
• /
• 1999

Today, offshore design field is concerned with system integration such as CIM(Computer Integrated Manufacturing), PDMS(Product Data Management System) and EDMS(Engineering Data Management System) in order to cope with the change of engineering specification as owner's requirements during construction stage of the project. This paper deals with the case study that describes about the efficient interface between material control system and 3D CAD system to support the design process in offshore industry using design rules involved the designer's knowledge. In this paper, we constructed an information system, called knowledge-based CAD interface systems, which is composed material code management system and 3D specification generator which automatically creates 3D catalogue anti specification by linking the material code, called short code, and the specification components of the 3D CAD system. As a result of the construction, it is possible to maintain consistency of the design process, and through reduction of the design processing time and improvement of the design process, competitiveness is improved.

• Geomechanics and Engineering
• /
• 제12권6호
• /
• pp.1021-1046
• /
• 2017

The assessment of slope stability is an essential task in geotechnical engineering. In this paper, a three-dimensional (3D) finite element analysis (FEA) was employed to investigate the performance of different shear pin arrangements to increase the stability of a soil block resting on an inclined plane with a low-interface friction plane. In the numerical models, the soil block was modeled by volume elements with linear elastic perfectly plastic material in a drained condition, while the shear pins were modeled by volume elements with linear elastic material. Interface elements were used along the bedding plane (bedding interface element) and around the shear pins (shear pin interface element) to simulate the soil-structure interaction. Bedding interface elements were used to capture the shear sliding of the soil on the low-interface friction plane while shear pin interface elements were used to model the shear bonding of the soil around the pins. A failure analysis was performed by means of the gravity loading method. The results of the 3D FEA with the numerical models were compared to those with the physical models for all cases. The effects of the number of shear pins, the shear pin locations, the different shear pin arrangements, the thickness and the width of the soil block and the associated failure mechanisms were discussed.

• Geomechanics and Engineering
• /
• 제12권3호
• /
• pp.399-415
• /
• 2017

A series of direct shear tests were conducted to investigate the frictional properties of the interface between structures and the filling soil of Chongqing airport fourth stage expansion project. Two types of structures are investigated, one is low carbon steel and the other is the bedrock sampled from the site. The influence of soil water content, surface roughness and material types of structure were analyzed. The tests show that the interface friction and shear displacement curve has no softening stage and the curve shape is close to the Clough-Duncan hyperbola, while the soil is mainly shear contraction during testing. The interface frictional resistance and normal stress curve meets the Mohr-Coulomb criterion and the derived friction angle and frictional resistance of interface increase as surface roughness increases but is always lower than the internal friction angle and shear strength of soil respectively. When surface roughness is much larger than soil grain size, soil-structure interface is nearly shear surface in soil. In addition to the geometry of structural surface, the material types of structure also affects the performance of soil-structure interface. The wet interface frictional resistance will become lower than the natural one under specific conditions.