• Journal of the Optical Society of Korea
• /
• 제10권1호
• /
• pp.28-32
• /
• 2006

We propose a new pH-sensing scheme using a methylene blue adsorption on an optical fiber cladding surface. Interactions between the silica and hydroxyl ions of a base solution induce the surface of the silica negatively charged. The charged surface attracts the positively charged chromophores of methylene blue. As the pH of the solution is reduced, the electrostatic attraction will also be reduced. This electrostatic attraction can change the transmitted light intensity of the cladding mode, since the boundary condition changes. We also carried out a simulation to verify the effect from external refractive index change around a long-period fiber grating. Our results confirm that the wavelength shift by external refractive index change is negligible compared to the transmitted light intensity variation of the cladding mode. By using a long-period grating pair, we can detect the cladding mode transmittance variations. Experimentally, we showed the possibility of pH sensing in the $1.5{\mu}m$ infrared region.

• 정보저장시스템학회논문집
• /
• 제6권2호
• /
• pp.63-67
• /
• 2010

Holographic data storage system is one of next generation high density optical memories. Thereby storing multiple data pages using multiplexing method in one spot, we can achieve high store density and fast access time. However, for uniform writing, we must control exposure time properly by the change of writing material characteristics. Many studies have been investigated about exposure time scheduling. However, once it is decided, we cannot change the scheduled time. Therefore, it is hard to obtain uniform data intensity. In this study, we propose exposure time control method using additional red beam as the monitoring signal. Through reconstructed red beam intensity in real time, we can adjust exposure time by the writing condition change. We construct compensation method mathematically and verify the feasibility of proposed method through the experiments.

• 대한원격탐사학회지
• /
• 제16권4호
• /
• pp.355-365
• /
• 2000

The interferometric correlation, or coherence, is calculated to measure the variance of the interferometric phase and amplitude within the neighbourhood of any location within the image at a result of SAR (Synthetic Aperture Radar) interferometric process which utilizes the phase information of the images. The coherence contains additional information that is useful for detecting point targets which change their location in an area of interest (AOI). In this research, a RGB colour composite image was generated with a intensity image (master image), a intensity change image as a difference between master image and slave image, and a coherence image generated as a part of SAR interferometric processing. We developed a technique performing detection of a point target movement using SAR interferometry and applied it to suitable tandem pair images of ERS-1 and ERS-2 as test data. The possibility of change detection of a point target in the AOI could be identified with the technique proposed in this research.

• Food Science and Biotechnology
• /
• 제15권3호
• /
• pp.374-379
• /
• 2006

This study was carried out to investigate the physicochemical properties of frozen pork muscle which has been thawed using the ohmic thawing process, and to establish the optimal ohmic power intensity. The samples were frozen at $-40^{\circ}C$ and thawed at 0, 10, 20, 30, and 40 V by ohmic thawing. Increasing ohmic power intensity correlated with increased thawing rates. The relationship between ohmic power intensity and thawing rate can be represented as a polynomial function. The pH value decreased with increasing ohmic power intensity (p<0.05). With regard to color measurement, the $L^*$, a, and b values of thawing at all ohmic power intensities were not significantly different. The water holding capacity showed a peak value of 41.62% with an ohmic thawing intensity of 30 V. Cooking losses were lowest at the lowest ohmic thawing intensity of 10 V. Thiobarbituric acid reactive substance (TBARS) levels with all thawing processes were slightly higher than that of the control (p<0.05). Increasing ohmic power intensity did not tend to change the total volatile basic nitrogen (TVBN) value.

• 한국전기전자재료학회논문지
• /
• 제34권1호
• /
• pp.8-15
• /
• 2021

Micro-LEDs can be applied to various parts of a product. However, it has disadvantages compared to general LEDs in large displays such as low efficiency, intensity, and contrast ratio, among others, owing to their short history of study. The simulations were carried out using ray-tracing software to investigate the change in light intensity and light distribution according to pattern shapes on the sapphire substrate of the flip-chip micro-LED (FC μ-LED) array. Three patterns-concave square patterns, convex square patterns, and Ag coated convex patterns-which existed on the opposite side of FC μ-LEDs (115 ㎛ × 115 ㎛) array, were applied. The intensity of FC μ-LEDs on the center of the receivers depends on the pattern depth with shape. The concave square patterns having FC μ-LEDs arrays show that decreasing intensity as the patterns depth. On the contrary, the convex square patterns having FC μ-LEDs arrays shows that increasing intensity as the patterns depth. In addition, the highest intensity shows that FC μ-LEDs having Ag-coated convex patterns on the opposite side of sapphire lead to a reduction in light crosstalk owing to the Ag film.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.194-197
• /
• 1996

The high-strength aluminum alloy 7075-T651 was used to observe the fatigue-crack-propagation behavior for the various stress ratios with constant amplitude loading and thus to predict the fatigue life. With a chevron notch in the specimen the fatigue-crack-propagation behavior of through crack was investigated. Crack propagation behavior of through crack in the depth direction and crack growth of weldments were experimentally studied. Base material heat affected zone and weld material were considered in the fracture of weldments. The change of crack-propagation length with respect to several parameters such as stress intensity factor range(ΔK) effective stress intensity factor range(ΔKeff)ration of effective stress intensity factor range(U) stress intensity factor of crack opening point(K op) maximum stress intensity factor(K max) and number of cycles(Nf)was determined. The crack length of through crack of weldments was 2.4mm and the remaining part was a base material. The experiment was accomplished by making the crack propagate near the base material.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.222-228
• /
• 1999

The two-microphone sound-intensity technique has been used for the detection of defects in radially loaded ball bearings. The difference in the sound-intensity levels measured for bearings with no defect and for those with intentionally introduced defects of different sizes in their elements under various operating conditions of loads and speeds is demonstrated. A change in the intensity frequency spectrum because of the defects is observed. The results show that the detectability of an outer-race defect is much better than that of on inner-race or ball defect. It is difficult to detect defects at lower speeds. Sound-pressure measurements were also performed fur comparison, and it is shown that the detectability of defects by sound-intensity measurements is better than that by sound-pressure measurements.

• Physical Therapy Rehabilitation Science
• /
• 제3권2호
• /
• pp.107-111
• /
• 2014

Objective: In the present study, we investigated the protective effects of low-intensity treadmill training in doxorubicin-induced cardiotoxicity rat models. Design: Randomized controlled trial. Methods: In this study, we randomly divided them into four groups. The normal group included non-cardiotoxicity normal control (n=10), the control group included non-treadmill training after doxorubicin-induced cardiotoxicity (n=10), the experimental group I included low-intensity treadmill training (3 m/min) after doxorubicin-induced cardiotoxicity (n=10), and the experimental group II included low-intensity treadmill training (8 m/min) after doxorubicin-induced cardiotoxicity (n=10). Rats in the treadmill training group underwent treadmill training, which began at 2 weeks after first intraperitoneal injection. We determined the body weight change for each rat on days 1 and 21. Biochemical markers (lactate dehydrogenase [LDH], creatine kinase [CK], glutathion, aspartate transaminase [AST], and alanine transaminase [ALT]) concentration in the serum change of rats from all four groups was examined at the end of the experiment. Results: The results showed that the experimental group I and II showed a significant increase in body weight as compared with that of the control group (p<0.05). We observed that the biochemical markers (LDH, CK, glutathion, AST, and ALT) were improved in the experimental group I than the experimental group II (p<0.05). There was no difference between the experimental groups. Conclusions: In conclusion, our data suggest that low-intensity treadmill training applied after doxorubicin treatment protects against cardiotoxicity following treatment, possibly by enhancing antioxidant defenses and inhibiting cardiac muscle cell apoptosis.

• 비파괴검사학회지
• /
• 제29권1호
• /
• pp.21-26
• /
• 2009

이차원 표면균열을 가진 재료의 모드 I 응력확대계수($K_1$)를 교류전위차법으로 효과적으로 계측할 수 있는 방법을 결정하기 위해 하중이 가해질 때 균열면을 포함한 시험편 내부 및 외부의 자속 변화 해석이 필요하여 이를 이론적 및 실험적으로 규명하였다. 이론 해석 결과 균열면 사이의 공기중 자속은 시험편에 하중을 가하여도 변하지 않았으며, 실험 결과와 일치하였다. 따라서 유도기전력을 많이 유도할 수 있도록 제작된 계측계로 측정한 하중에 따른 교류전위차 변화는 시험편의 내부 인덕턴스 변화와 시험편 내부 인덕턴스 변화와 관련된 상호 인덕턴스 변화에 의하여 발생한다.

• 한국기후변화학회지
• /
• 제9권1호
• /
• pp.31-45
• /
• 2018

This study implemented the prediction of drought properties (number of drought events, intensity, duration) using the user-oriented systematical procedures of downscaling climate change scenarios based the multiple global climate models (GCMs), AIMS (APCC Integrated Modeling Solution) program. The drought properties were defined and estimated with Effective Drought Index (EDI). The optimal 10 models among 29 GCMs were selected, by the estimation of the spatial and temporal reproducibility about the five climate change indices related with precipitation. In addition, Simple Quantile Mapping (SQM) as the downscaling technique is much better in describing the observed precipitation events than Spatial Disaggregation Quantile Delta Mapping (SDQDM). Even though the procedure was systematically applied, there are still limitations in describing the observed spatial precipitation properties well due to the offset of spatial variability in multi-model ensemble (MME) analysis. As a result, the farther into the future, the duration and the number of drought generation will be decreased, while the intensity of drought will be increased. Regionally, the drought at the central regions of the Korean Peninsula is expected to be mitigated, while that at the southern regions are expected to be severe.