• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1104-1110
• /
• 2012

The inverted pendulum system is a common, interesting control problem that involves many basic elements of control theory. In the early, controls of stabilization for the inverted pendulum system were used classical methods like PD, PID controller. In recently, however, control methods based on modern and intelligent control theory are widely applied. The fuzzy logic controller which is often used in nonlinear control is a little too hard to design due to increasing fuzzy rules rapidly if the given system like inverted pendulum has many state variables. Also, in case the state variables are divided into two parts, two fuzzy controllers are needed in the control system. In this paper, the authors propose FCSC(Fuzzy Controller based on State variables Combination) that reorganized into two new signals depending on the physical meaning of the four state variables of the inverted pendulum system. The proposed method is applied to the inverted pendulum system and simulations are accomplished to illustrate the control performance.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1729-1742
• /
• 2017

In designing System Protection Schemes (SPSs) in power systems, protecting transmission network against extreme undesired conditions becomes a significant challenge in mitigating the transmission line overloading. This paper presents an intelligent Special Protection and Control Scheme (SPCS) using of Differential Evolution with Adaptive Mutation (DEAM) approach to obtain the optimum generation rescheduling to solve the transmission line overloading problem in system contingency conditions. DEAM algorithm employs the attraction-repulsion idea that is applied in the electromagnetism-like algorithm to support the mutation process of the conventional Differential Evolution (DE) algorithm. Different N-1 contingency conditions under base and increase load demand are considered in this paper. Simulation results have been compared with those acquired from Genetic Algorithm (GA) application. Minimum severity index has been considered as the objective function. The final results show that the presented DEAM method offers better performance than GA in terms of faster convergence and less generation fuel cost. IEEE 30-bus test system has been used to prove the effectiveness and robustness of the proposed algorithm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.758-767
• /
• 2012

In the ad-hoc wireless network environment, that the fixed sensor nodes and the sensor nodes to move are mixed, as the number of the sensor nodes with mobility are getting more, the costs to recover and maintain the whole network will increase more and more. This paper proposed the CDSR (Cost based Dynamic Source Routing) algorithm being motivated from the typical DSR algorithm, that is one of the reactive routing protocol. The cost function is defined through measuring the cost which any sensor node pays to participate in the whole network for communication. It is also showed in this paper that the proposed routing algorithm will increase the efficiency and life of whole sensor network through a series of experiments.

• Smart Structures and Systems
• /
• v.17 no.1
• /
• pp.135-147
• /
• 2016

This paper describes a smart structural system, which uses smart materials for real-time monitoring and active control of bolted-joints in steel structures. The goal of this research is to reduce the possibility of failure and the cost of maintenance of steel structures such as bridges, electricity pylons, steel lattice towers and so on. The concept of the smart structural system combines impedance based health monitoring techniques with a shape memory alloy (SMA) washer to restore the tension of the loosened bolt. The impedance-based structural health monitoring (SHM) techniques were used to detect loosened bolts in bolted-joints. By comparing electrical impedance signatures measured from a potentially damage structure with baseline data obtained from the pristine structure, the bolt loosening damage could be detected. An outlier analysis, using generalized extreme value (GEV) distribution, providing optimal decision boundaries, has been carried out for more systematic damage detection. Once the loosening damage was detected in the bolted joint, the external heater, which was bonded to the SMA washer, actuated the washer. Then, the heated SMA washer expanded axially and adjusted the bolt tension to restore the lost torque. Additionally, temperature variation due to the heater was compensated by applying the effective frequency shift (EFS) algorithm to improve the performance of the diagnostic results. An experimental study was conducted by integrating the piezoelectric material based structural health monitoring and the SMA-based active control function on a bolted joint, after which the performance of the smart 'self-monitoring and self-healing bolted joint system' was demonstrated.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.131-135
• /
• 2011

In this paper, we describe the design and implementation of wireless smart plug having AC power sensor and intelligent standby power control algorithm for energy sensor network. The adaptive standby power control algorithm has function to apply different threshold of standby power by using learning algorithm depending on electric equipments. As using the proposed algorithm, user convenience will be more better and power consumption can be more reduced. The implemented prototypes of wireless smart plug and wireless access point were tested to verify the required functions and performance. As a result, we confirmed practicality of wireless smart power sensor and satisfaction of given design specifications.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.2 s.75
• /
• pp.67-74
• /
• 2007

Maritime and Ocean Engineering Research Institute (MOERI), a branch of KORDI, has designed and manufactured a model of an autonomous underwater vehicle (AUV) named ISiMI (Integrated Submergible for Intelligent Mission Implementation). ISiMI is an AUV platform to satisfy the various needs of experimental test required for development of challenging technologies newly investigated in the field of underwater robot; control and navigational algorithms and software architectures. The main design goal of ISiMI AUV is downsizing which will reduce substantially the operating cost compared to other vehicles previously developed in KORDI such as VORAM or DUSAUV. As a result of design and manufacturing process, ISiMI is implemented to be 1.2 m in length, 0.17 m in diameter and weigh 20 kg in air. A series of tank test is conducted to verify the basic functions of ISiMI in the Ocean Engineering Basin of MOERI, which includes manual control with R/F link, auto depth, auto heading control and a final approach control for underwater docking. This paper describes the implementation of ISiMI system and the experimental results to verify the function of ISiMI as a test-bed AUV platform.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.347-350
• /
• 2006

Maritime and Ocean Engineering Research Institute (MOERI), a branch of KORDI, has designed and manufactured a model of an autonomous underwater vehicle (AUV) named ISiMI(Integrated Submergible for Intelligent Mission Implementation). ISiMI is an AUV platform to satisfy the various needs of experimental test required for development of challenging technologies newly investigated in the field of underwater robot; control and navigational algorithms and software architectures. The main design goal of ISiMI AUV is downsizing which will reduce substantially the operating cost compared to other vehicles previously developed in KORDI such as VORAM or DUSAUV. As a result of design and manufacturing process, ISiMI is implemented to be 1.2m in length, 0.17m in diameter and weigh 20 kg in air. A series of tank test is conducted to verify the basic functions of ISiMI in the Ocean Engineering Basin of MOERI, which includes manual control with R/F link, auto depth, auto heading control and a final approach control for underwater docking. This paper describes the implementation of ISiMI system and the experimental results to verify the function of ISiMi as a test-bed AUV platform.

• Journal of Power Electronics
• /
• v.13 no.1
• /
• pp.139-160
• /
• 2013

In this paper, an intelligent robust control system (IRCS) for precision tracking control of permanent-magnet synchronous motor (PMSM) servo drives is proposed. The IRCS comprises a recurrent wavelet-based interval type-2 fuzzy-neural-network controller (RWIT2FNNC), an RWIT2FNN estimator (RWIT2FNNE) and a compensated controller. The RWIT2FNNC combines the merits of a self-constructing interval type-2 fuzzy logic system, a recurrent neural network and a wavelet neural network. Moreover, it performs the structure and parameter-learning concurrently. The RWIT2FNNC is used as the main tracking controller to mimic the ideal control law (ICL) while the RWIT2FNNE is developed to approximate an unknown dynamic function including the lumped parameter uncertainty. Furthermore, the compensated controller is designed to achieve $L_2$ tracking performance with a desired attenuation level and to deal with uncertainties including approximation errors, optimal parameter vectors and higher order terms in the Taylor series. Moreover, the adaptive learning algorithms for the compensated controller and the RWIT2FNNE are derived by using the Lyapunov stability theorem to train the parameters of the RWIT2FNNE online. A computer simulation and an experimental system are developed to validate the effectiveness of the proposed IRCS. All of the control algorithms are implemented on a TMS320C31 DSP-based control computer. The simulation and experimental results confirm that the IRCS grants robust performance and precise response regardless of load disturbances and PMSM parameters uncertainties.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.12
• /
• pp.1011-1019
• /
• 2005

In this paper, Ubiquitous Home Mess-Cleanup Robot(UHMR), which has a practical function of the automatic mess-cleanup, is developed. The vacuum-cleaner had made the burden of house chore lighten but the operation labour of a vacuum-cleaner had been so severe. Recently, the cleaning robot was producted to perfectly solve the cleaning labour of a house but it also was not successful because it still had a problem of mess-cleaning, which was the clean-up of big trash and the arrangement of newspapers, clothes, etc. The cleaning robot is to just vacuum dust and small trash but has no function to arrange and take away before the automatic vacuum-cleaning. For this reason, the market for the cleaning robot is not yet built up. So, we need a design method and technological algorithm of new automatic machine to solve the problem of mess-cleanup in house. It needs functions of agile automatic navigation, novel manipulation system for mess-cleanup. The automatic navigation system has to be controlled for the full scanning of living room, to recognize the absolute position and orientation of tile self, the precise tracking of the desired path, and to distinguish the mess object to clean-up from obstacle object to just avoid. The manipulate,, which is not needed in the vacuum-cleaning robot, must have the functions, how to distinguish big trash to clean from mess objects to arrange, how to grasp in according to the form of mess objects, how to move to the destination in according to mess objects and arrange them. We use the RFID system to solve the problems in this paper and propose the reading algorithm of RFID tags installed in indoor objects and environments. Then, it should be an intelligent system so that the mess cleaning task can be autonomously performed in a wide variety of situations and environments. It needs to also has the entertainment functions for the good communication between the human and UHMR. Finally, the good performance of the designed UHMR is confirmed through the results of the mess clean-up and arrangement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.324-330
• /
• 2004

To integration the field device as a control system correctly in fielders systems. We have to offer the DD(Device Description) with the function and internal parameter into the configuration software. The DD which is written in the DDL(Device Description Lansuage) is made as IEC 61804-PART 2 and it is used in Profibus, Foundation Field bus, HART. However, the DD is dependent to the fieldbus and it doesn't have a suitable form in the industrial Ethernet. Therefore, in this paper, we described the internal function and parameter of the Field device as XDD(XML for Device Description) by using XML (extensible Markup Language) which isn't dependent to fieldbus and has a suitable form for industrial ethernet. Futhermore, we present the possibility of XDD's application in the distributed control system by examining the possibility of ethernet's development in the industrial area.