• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제23권5호
• /
• pp.483-491
• /
• 2010

In this paper, ${\Delta}J$-integral is used to analyze fatigue crack growth of viscoelastic material. Using analytical integral value, the J-integral is calculated. So, reduction of calculation time and increase of accuracy are made possible. The stress intensity factor is calculated using the finite element method code. In difference with existed fatigue crack analysis using ${\Delta}K$, we were successfully able to analyze various load amplitude and the fatigue crack of load cycle only with two fatigue crack growth parameters and creep compliance. The analysis gives N-${\alpha}$ curve for simulation of crack growth, and the curve almost corresponds with test results.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제22권2호
• /
• pp.40-45
• /
• 1986

In this paper, the I-resistance curve of low-carbon steel with 3 mm thickness was investigated for various crack ratios. The experiments were carried out for the center cracked tension (CCT) specimen with about 50 mm width on an instron machine. The plane stress fracture toughness obtained by the Simpson's formula was Ii. = 24.96 kgffmm. Simpson's formula which considers crack growth in obtaining J integral showed more conservative lin than Rice's and Sumpter's. For materials that may be approximated by the Ramberg and Osgood stress strain law, the relevant crack parameters like the J integral, load line displacement are approximately normalized. Crack driving forces in terms of the I integral are computed for low-carbon steel CCT specimen using the above estimation scheme. Comparison of the prediction with actual experimental measurements by Simpson's formula showed good agreement for several different sized specimen.

• Journal of the Korean Society for Precision Engineering
• /
• 제6권3호
• /
• pp.90-99
• /
• 1989

In this study, J-integral values obtained by various methods, i.e, R-Curve, Unloading Compliance, Strectched Zone Width [SZW], and Acoustic Emission [AE] methods are investigated. Elasto-plastic fracture toughness [$J_IC$] estimations by R-curve method are overestimated than those by SZW method, and those by unloading compliance method is around middle value of them. And the difference between them is little. The $J_IC$ value by AE method was almost agreed with that by SZW, and then proved to be useful. Crack propagation mechanism on fractography is a stable ductile fracture. For the identification of ductile fracture, both fractography analysis and AE method were applied to estimate the characteristics more precisely.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제28권10호
• /
• pp.658-664
• /
• 2015

This paper presents an electrical feature analysis of hysteresis curves in memristor differential and intergral control circuit. After making macro model of the memristor device, electric characteristics of the model such as time analysis, frequency dependent DC I-V curves were performed by PSPICE simulation. Also, we made a circuit of memristor-capacitor based on nano-wired memristor device and analyzed the simulated PSPICE results. Finally, we proposed a memristor based differential or integral control circuit, analyzed hysteresis curve characteristic in the control circuit.

• Journal of the Korean Mathematical Society
• /
• 제42권3호
• /
• pp.499-516
• /
• 2005

We obtain the type set for the fractional integral operator along the curve $(t,t^2,\;{\alpha}t^3)$ on the three dimensional Heisenberg group when $\alpha\neq{\pm}1/6$. The proof is based on the Fourier inversion formula and the angular Littlewood-Paley decompositions in the Heisenberg group in [5].

• Bulletin of the Korean Mathematical Society
• /
• 제60권1호
• /
• pp.47-73
• /
• 2023

This paper is devoted to establishing certain L^p bounds for the generalized parametric Marcinkiewicz integral operators associated to surfaces generated by polynomial compound mappings with rough kernels given by h ∈ ∆_γ(ℝ₊) and Ω ∈ Wℱ_β(S^n-1) for some γ, β ∈ (1, ∞]. As applications, the corresponding results for the generalized parametric Marcinkiewicz integral operators related to the Littlewood-Paley g^*_λ functions and area integrals are also presented.

• Journal of the Korean Mathematical Society
• /
• 제56권5호
• /
• pp.1355-1370
• /
• 2019

A curve $X{\subset}\mathbb{P}^r$ has maximal rank if for each $t{\in}\mathbb{N}$ the restriction map $H^0(\mathcal{O}_{\mathbb{P}r}(t)){\rightarrow}H^0(\mathcal{O}_X(t))$ is either injective or surjective. We show that for all integers $d{\geq}r+1$ there are maximal rank, but not arithmetically Cohen-Macaulay, smooth curves $X{\subset}\mathbb{P}^r$ with degree d and genus roughly $d^2/2r$, contrary to the case r = 3, where it was proved that their genus growths at most like $d^{3/2}$ (A. Dolcetti). Nevertheless there is a sector of large genera g, roughly between $d^2/(2r+2)$ and $d^2/2r$, where we prove the existence of smooth curves (even aCM ones) with degree d and genus g, but the only integral and non-degenerate maximal rank curves with degree d and arithmetic genus g are the aCM ones. For some (d, g, r) with high g we prove the existence of reducible non-degenerate maximal rank and non aCM curves $X{\subset}\mathbb{P}^r$ with degree d and arithmetic genus g, while (d, g, r) is not realized by non-degenerate maximal rank and non aCM integral curves.

• Korean Journal of Materials Research
• /
• 제4권5호
• /
• pp.574-580
• /
• 1994

This study is about cure kinetics of DGEBA/MDA/MN(malononitrile) system by Barrett method and Integral method using DSC dynamic run. Curing behavior was shown through DSC and the heat change involved in a reaction could be measured directly with DSC. The kinetic parameters such as activation energy, pre-exponential factor and reaction order were given by Barrett method and Integral method obtained in an assumption that the area of DSC enthalpic analysis curve was propotional to the enthalpic change.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제2권1호
• /
• pp.88-93
• /
• 1998

It is frequently important to approximate a rational B$\acute{e}$zier curve by an integral, i.e., polynomial one. This need will arise when a rational B$\acute{e}$zier curve is produced in one CAD system and is to be imported into another system, which can only handle polynomial curves. The objective of this paper is to present an algorithm to approximate rational B$\acute{e}$zier curves with polynomial curves of higher degree.

• Honam Mathematical Journal
• /
• 제46권2호
• /
• pp.209-223
• /
• 2024

In this paper, we investigate the spatial quaternionic expressions of the ruled surfaces whose base curves are formed by the Smarandache curve. Moreover, we formulate the striction curves and dralls of these surfaces. If the quaternionic Smarandache ruled surfaces are closed, the pitches and angle of pitches are interpreted. Finally, we calculate the integral invariants of these surfaces using quaternionic formulas.