• 대한조선학회논문집
• /
• 제31권4호
• /
• pp.82-98
• /
• 1994

본 논문에서는 파중에서 조종운동을 하는 선박에 작용하는 유체력에 대한 수학적 모델을 확립하고, 이에 대한 수치해석을 수행하였다. 파중에서 운항하는 선박은 입사파의 주파수에 의존하는 고주파수 운동과 선박의 조종운동에 따른 저주파수 운동을 하게되므로, two time scale expansion 방법을 적용하여 속도포텐셜에 대한 선형경계치 문제를 정립하였으며, 선박의 조종운동에 미치는 파의 영향은 2차차수 저주파수 표류력만을 조종운동방정식에 포함시켜 고려하였다. 속도포텐셜에 대한 적분방정식의 해는 3차원 파넬방법을 사용하여 구하였으며, 선박에 작용하는 힘은 직접적분법을 사용하여 계산하였다.

• 대한조선학회지
• /
• 제17권4호
• /
• pp.13-20
• /
• 1980

The integral equation method to solve the boundary-value problem of a 2-dimensional body oscillating in the presence of a free surface generally breaks down at and near irregular frequencies due to the hypothetical flow inside the body. In this paper singularity distributions were extended to an inner free surface to remove the irregular frequency as Ohmatsu's work in 1978, and the solution for the above problem was found by using stream function. For various bodies including Lewis form cylinders, the hydrodynamic forces were calculated numerically at various wave numbers. From the results we concluded that the irregular frequencies can be removed even for the Lewis form cylinder as Ohmatsu done for circular cylinders, and calculated hydrodynamic forces by the present method are little higher than those of Ohmatsu's when the singularities are put on the inner free surface of the body. We specially point out that the solution for heaving motion converges in an oscillatory manner but not for swaying and rolling motions.

• 대한조선학회논문집
• /
• 제28권1호
• /
• pp.38-52
• /
• 1991

자유표면하에서 움직이는 임의의 형상의 3차원 물체로 인한 비선형 유체력을 준 Lagrangian 방법을 사용하여 해석하였다. 경계치 문제는 경계 적분 방법(Boundary Integral Method)을 이용하여 해결하였으며, 물체와 자유 표면의 형상은 곡면 Panel로 표현하였다. 이들 표면은 hi-cubic B-spline 방법을 사용하여 유한개의 작은 표면 요소로 나뉘어지게 되며, 또한 \phi와 (equation omitted) 표면 요소상에서 bi-linear하다고 가정한다. 특이점에 의한 유기 포텐시얼의 계산시 1/R에 비례하는 부분은 제거하고 해석적으로 처리하였다. 물체로부터 멀리 떨어진 곳에서의 유체 유통은 좌표계의 원점에 위치한 Dipole로 표현하였으며, Time Stepping시 Runge-Kutta의 4차 방법을 사용하였다. 3차원인 경우에 대한 적분 방정식과 포텐시얼의 시간 미분간에 대한 경계 조건이 유도되었으며, 이러한 식들을 사용하여 자유표면의 형상과 물체의 운동을 동시에 계산하였다. 대진폭을 가지고 규칙적으로 진동하는 물체에 작용하는 힘과 이때의 자유 표면 형상을 계산하고 기 발표된 자료와 비교하여 보았으며, 자유표면 근처에서 운동하는 물체에 작용하는 비선형 효과를 관찰하였다.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.1275-1289
• /
• 1996

The plane elasticity problem of collinear cracks in a layered medium is investigated. The medium is modeled as bonded structure constituted from a surface layer and a semi-infinite substrate. Along the bond line between the two dissimilar homegeneous constituents, it is assumed that as interfacial zone having the functionally graded, nonhomogeneous elastic modulus exists. The layered medium contains three collinear cracks, one in each constituent material oriented perpendicular to the nominal interfaces. The stiffness matrix formulation is utilized and a set of homogeneous conditions relevant to the given problem is readily satisfied. The proposed mixed boundary value problem is then represented in the form of a system of integral equations with Cauchy-type singular kernels. The stress intensity factors are defined from the crack-tip stress fields possessing the standard square-root singular behavior. The resulting values of stress intensity factors mainly address the interactions among the cracks for various crack sizes and material combinations.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.447-456
• /
• 1997

Stress intensity factor of semi-infinite parallel crack propagation with constant velocity in dissimilar orthotropic strip under out-of-plane clamped desplacement is investigated. Using Fourier integral transforms the boundary value problem is derived by a pair of dual integral equation and finally reduced to a single Wiener-Hopf equation. By applying Wiener-Hopf technique the equation is solved. Applying this result the asymptotic stress fields near the crack tip are determined, from which the stress intensity factor is obtained in closed form. The more the ratio of anisotropy or the ratio of bi-material shear modulus increase in the main material including the crack, the more the stress intensity factor increases. Discontinuity in the stress intensity factor is found as the parallel crack approaches the interface. In special case, the results of isotropic materials agree well with those by the previous researchers.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.120-128
• /
• 2002

Interfacial cracks in a piezoelectric layer bonded to dissimilar elastic layers under the combined anti-plane mechanical shear and in-plane electrical leadings are considered. By using Fourier cosine transform, the mixed boundary value problem is reduced to a singular integral equation which is solved numerically to determine the stress intensity factors. Numerical results for the effects of the material properties and layer geometries on the stress intensity factors are obtained.

• Journal of Advanced Research in Ocean Engineering
• /
• 제2권1호
• /
• pp.12-21
• /
• 2016

In this paper, the $2^{nd}$ order hydrodynamic force effect of heaving submerged circular cylinder is considered, with the linear potential theory. Boundary value problem (BVP) is expanded up to the $2^{nd}$ order by using of the perturbation method and the $2^{nd}$ order velocity potential is calculated by means of integral equation technique using the classical Green's function expressed in cylindrical coordinates. The method of solving BVP is based on eigenfunction expansions. With different cylinder heights and heaving frequencies, graphical results are presented. As a result of the study, the cause of oscillatory force pattern is analyzed with the occurrence of negative added mass when a top of the cylinder gets closer to the free surface.

• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3408-3414
• /
• 1996

This paper investigated plane strain stress intensity factors caused by thermal impact on a center-crack strip. The crack was aligned perpendicularly to the strip boundary. The problem was analysed by determining the dislocation density function in the singular integral equations formulated by the dislocation theory. Under the abrupt temperature change along the edge, the center crack behaved as a mode I crack due to the symmetric geometry. The value of maximum stress intensity factor monotonically increased until the ratio of dimensionless crack length approached to about 0.3, followed by gradual decrease. As a result, a critical corresponding crack length was determined.

• 대한기계학회논문집
• /
• 제15권5호
• /
• pp.1611-1619
• /
• 1991

본 연구에서는 Hilton과 Sih의 경우를 확장 적용하여 Fig. 1(b)와 같이 탄성 층 내부에 존재하는 중앙균열선단의 응력확대계수 산출을 위하여 균열부위를 제외하고 는 섬유층과 레진층이 완전히 접착되었다고 가정한 모델을 다음과 같이 설정하였다. 중앙균열을 내재하고 있는 복합재료의 역학적 거동을 해석하기 위하여, 접착레진을 주 로하는 층(resin rich layer)을 중심으로 하여 상하 각1개의 섬유 (fiber)층과 균질한 특성을 갖는 복합재료의 층으로 단순화 하였으며, 이러한 단순화는 적층재에서의 균열 주위의 국부응력을 해석하기 위한 것으로서 복합재료는 레진층이나 섬유층에 비하여 매우 두꺼우므로 반무한체로 이상화 하였다. 선형탄성 이론에 의하여 혼합 경계조건 문제(mixed boundary value problem)로 부터 제2종 Fredholm적분방정식(fredholm int- egral equation of a second kind)을 유도하였으며 수치해석적인 방법에 의하여 응력 확대계수를 구하였다.

• 대한조선학회지
• /
• 제13권3호
• /
• pp.1-9
• /
• 1976

A numerical method for solving the boundary-value problem related to potential flows with a free surface and an experimental work are introduced in this paper. The forced heaving motion of cylinders with arbitrary shapes in water of finite depth are Considered here. The Fredholm integral equation of the first kind is employed in determining strengths of singularities distributed on the body surface. And the results obtained by the present method for the case of a heaving circular cylinder on water of finite depth agree well with existing results of earlier investigators.