• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.539-542
• /
• 2003

Recently, the polymer insulators which are being used for high voltage applications have some advantages such as light weight, small size, vandalism resistance, hydrophobicity and easy making process. During outdoor service of polymer insulators, the surface of the insulating material is frequently subjected to moisture and contamination which lead to the well known phenomenon of dry band arcing. Their tracking resistance, erosion resistance, end sealing and shed design are very important because dry band arcing causes degradation of polymer surface. The shape design of porcelain insulator is formalized but design standard for polymer insulator is no standardized up to now, much research is necessary in real condition. In this paper, the aging property of polymer insulator with shed shape(regular, alternative type) is analyzed through numerical analysis, CEA(canadian electricity association) tracking wheel test and IEC 61109 Annex C.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.3
• /
• pp.208-214
• /
• 2011

In this thesis, the partial discharge according to applied voltage and variations of cross-sectional area and length of the conductor related to general condition for using cable was measured in order to study degradation diagnosis for 2-Core cable of the PVC insulator used in industrial fields for other safety installations. Also the thermal degradation conditions under various installation circumstances of cables were studied by assuming degradation conditions with each different degradation rate (50%, 67%, 100%) such as variation in degradated temperature, thermal exposure time, normal state, partially degradated state and overall degradated state for thermal degradation diagnosis. The quantity of electric discharge (V-Q) according to applied voltage was measured for measurement of inception voltage and extinction voltage. The quantity of electric discharge and the number of electric discharge (Q-N) were measured with applied voltage kept constantly. In addition, pictures were taken using SEM (scanning electron microscope) to compare the surface of external insulator to degradated state of internal insulator according to thermal degradation temperature and also compare the surface of external insulator to degradated surface state of internal insulator according exposure time of cables to thermal stress.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.1
• /
• pp.66-71
• /
• 2022

The insulator used for the transmission line is a device that is bonded with a cap, pin, ceramic, and cement to withstand insulation capacity and mechanical load. The insulator design can help to reduce the dispersion of the electric field; thus, the optimization of today's design, especially as demanded power grows, is critical. The designs of four manufacturers were used to perform a comparative analysis. Under dry circumstances of the new product, an electric field distribution study was done with no pollutants attached. Manufacturer D's design has the best voltage uniformity of 24.33% and the arc length of 500 mm or more. Manufacturer C's design has an equalizing voltage of more than 2% higher than that of other manufacturers. The importance of the design of the insulator and the number of connections according to the installation conditions is very efficient for transmission lines that will increase in the future.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.589-592
• /
• 2001

Generally, hanger insulator for polymer arrestor have to be good insulation properties and mechanical strength and weatherability, But many remark and repairs have been to think about low cost and light weight. The Paper is used Polymer arrestor for post and performance analysis and mechanical strength insulator hanger according to development of simplest product. To enhance the efficiency of experimental modal analysis, we proposed the process which is the selection of the locations and the number of measurement points for pre-test.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.160-163
• /
• 2002

Micro via hole Fabrication is studied by means of minimizing method to circuit size as many electric products developed to portable and minimize. Most of currently micro via hole fabrication using laser is that fabricate insulator layer using CO2 Laser after Cu layer by etching, or fabricate insulator layer using IR after trepanning Cu by UV. In this paper, it was performed that a metal layer and insulator layer were worked upon only one UV laser, and increase to processing speed by experiment.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.553-555
• /
• 2000

Recently polymer insulators are being used for outdoor high voltage applications. Polymer insulators for transmission line have significant advantages over porcelain and glass insulators, especially for ultra-high voltage(UHV) transmission lines. In this paper, the design trend and method polymer insulator are investigated and Aging test method is analysed to know life time of insulator.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1443-1445
• /
• 1997

This paper presents an analysing method to find out an optimum metal shape for insulation strength of SCI(Silicone Composite Insulator). Using finite element method, the interested parameters of the configuration such as a aspect of metal/silicone composite and a material properties are investigated and derived a thread of optimum design parameters.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1734-1736
• /
• 1997

Insulator strings can be frequently damaged by fault currents occured by lightning strokes, overvoltages and contamination of the insulators. So the Insulator damages may lead to extensive damages to transmission lines as well as power outages that have caused dangerous situations to occur. This paper suggests the characteristics of arcing horn in relation to the protection of insulators and basic design concepts of the arcing horn for transmission lines.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.172-173
• /
• 2003

SOI (Silicon on insulator) 웨이퍼를 이용하여 제작된 전자소자는 고온에서 동작이 안정될 뿐만 아니라 초고속 동작이 가능하고, 사용 소비전력이 낮고, 단위 소자의 집적 효율이 우수해 활발한 연구가 이루어지고 있다. 최근에 초고속 광소자와 단위 광소자들의 집적을 위해 Si 이외의 GaAs, InP, SIC 등의 반도체 박막을 절연층 위에 만드는 연구가 많이 진행되고 있다 따라서 초기에 절연체 위에 실리콘 박막을 형성하는 Silicon on insulator (SOI) 기술은 다양한 종류의 반도체 박막을 절연체 위에 형성하는 Semiconductor on insulator로 SOI의 의미가 확장되고 있다. (중략)

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.579-582
• /
• 2009

This paper reports the electrical characteristics of polyvinylpyrrolidone (PVPy) and the performance of organic thin-film transistors with PVPy as a gate insulator. PVPy shows a dielectric constant of about 3 and contributes to the upright growth of pentacene molecules with 15.3${\AA}$ interplanar spacing. These results will be discussed.