• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권1호
• /
• pp.17-25
• /
• 2005

This paper provides sufficient conditions for the robustness of Affine linear TFM(Transfer Function Matrix) MIMO (Multi-Input Multi-Output) uncertain systems based on Rosenbrock's DNA (Direct Nyquist Array). The parametric uncertainty is modeled through a Affine TFM MIMO description, and the unstructured uncertainty through a bounded perturbation of Affine polynomials. Gershgorin's theorem and concepts of diagonal dominance and GB(Gershgorin Bands) are extended to include model uncertainty. For this type of parametric robust performance we show robustness of the Affine TFM systems using Nyquist diagram and GB, DNA(Direct Nyquist Array). Multiloop PI/PB controllers can be tuned by using a modified version of the Ziegler-Nickels (ZN) relations. Simulation examples show the performance and efficiency of the proposed multiloop design method.

• 한국멀티미디어학회논문지
• /
• 제7권6호
• /
• pp.781-790
• /
• 2004

This paper presents a fourth-order cumulants based iterative algorithm for blind channel equalization. It is robust with respect to the existence of heavy Gaussian noise in a channel and does not require the minimum phase characteristic of the channel. In this approach, the transmitted signals at the receiver are over-sampled to ensure the channel described by a full-column rank matrix. It changes a single-input/single-output (SISO) finite-impulse response (FIR) channel to a single-input/multi-output (SIMO) channel. Based on the properties of the fourth-order cumulants of the over-sampled channel outputs, the iterative algorithm is derived to estimate the deconvolution matrix which makes the overall transfer matrix transparent, i.e., it can be reduced to the identity matrix by simple reordering and scaling. Both a closed-form and a stochastic version of the proposed algorithm are tested with three-ray multi-path channels in simulation studies, and their performances are compared with a method based on conventional second-order cumulants. Relatively good results are achieved, even when the transmitted symbols are significantly corrupted with Gaussian noise.

• 무역학회지
• /
• 제47권3호
• /
• pp.75-92
• /
• 2022

This study aims to analyze the International trade network of Water transport service using Social Network Analysis for defining the status of Korean Water transport industry. This study use World Input-Output Table of Asian Development Bank from 2000 to 2020 and build the International trade matrix of Water transport service from that. Therefore, this study analyze Out-degree centrality, In-degree centrality and betweenness centrality of Korea and other main countries in the matrix of World Water transport industry. As a result, Korea rank above 10th in the all centralities and the total output also rank 8th in the world, therefore, this study show the importance of Korean Water transport industry in the world. However, Singapore has the highest centrality in the world, even though China has the largest Total output among 63 countries.

• 한국통신학회논문지
• /
• 제40권11호
• /
• pp.2298-2304
• /
• 2015

본 논문은 다중 셀 다중입력 단일 출력 (MISO : multiple-input single-output) 하향링크 능동 안테나 시스템 (AAS : active antenna systems)에서 기지국의 수직 각도를 최적화하는 새로운 기법을 제시한다. 본 연구에서는 기존의 전역 탐색 방식 대신 간단하면서 최적의 값에 근사한 알고리듬들을 제안한다. 먼저, random matrix theory의 특성을 반영하여 평균 전송용량에 large system approximation이 적용된 수직적 빔포밍 알고리듬을 소개한다. 다음으로, signal-to-leakage-and-noise ratio (SLNR)을 기반으로 최적화 문제를 간단하게 만드는 수직적 빔포밍 알고리듬을 제안한다. 실험 결과를 통해 제안된 알고리듬들의 성능이 기존의 전역 탐색 알고리듬에 비해 복잡도가 매우 감소됨에도 불구하고 거의 비슷한 성능을 보임을 증명하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.512-517
• /
• 1998

In a matrix converter, input side and output side are coupled with each other through switching elements. Since disturbances on either side affect directly on the other side, it requires a high-speed on-line control system to compensate them. We proposed in previous papers a new control strategy and an on-line control circuit for a matrix converter. The control circuit could keep the output voltage at commanded value against fluctuation in the supply voltage. Furthermore wave forms of the output voltage and the input current were always kept sinusoidal. The switching pattern was generated by comparing modified voltage references with a carrier. The carrier was synchronized with the supply voltage using a PLL system, which made the control circuit complicated and costly. This paper discusses on the possibility of an asynchronized carrier. Experiment results show the input current distortion in case of asynchronous carrier is bigger than that of synchronous carrier. However, the deterioration can be minimized by increased carrier frequency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.265-267
• /
• 2004

A blind separation problem in a multiple-input-multiple-output (MIMO) linear time-invariant (LTI) system with finite-alphabet inputs is considered. A discrete-time matrix equation model is used to describe the input-output relation of the system in order to make full use of the advantages of modern digital signal processing techniques. At first, ambiguity problem is investigated. Then, based on the results of the investigation, a new identifiability condition is proposed for the case of an input-data set which is widely used in digital communication. A probability bound such that an arbitrary input matrix satisfies the identifiability condition is derived. Finally, Monte-Carlo simulation is performed to demonstrate the validity of our suggestions.

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.944-955
• /
• 2019

In this paper, the three-level T-type neutral-point-clamped indirect matrix converter topology and the relative space vector modulation methods are introduced to improve the voltage transfer ratio and output voltage performance. The presented converter topology is based on combinations of cascaded-rectifier and three-level T-type neutral-point-clamp inverter. It can overcome the limitation of voltage transfer ratio of the conventional matrix converter and the high voltage rating of power switches of conventional matrix converter. Two SVPWM strategies for proposed converter are described in this paper to achieve the advantages features such as: sinusoidal input/output currents and three-level output voltage waveforms. Results from Psim 9.0 software simulation are provided to confirm the theoretical analysis. Hence, a laboratory prototype was implemented, and the experimental results are shown to validate the simulation results and to verify the effectiveness of the proposed topology and modulation strategies.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2066-2072
• /
• 2010

In this paper, a variable structure dynamic output feedback controller with an transformed sliding surface is designed for the improved robust control of a uncertain system under unmatched system uncertainty, matched input matrix uncertainty, and disturbance satisfying some conditions. This paper is extended from the results of the static output feedback VSS in [9]. To effectively remove the reaching phase problems, an initial condition of the dynamic output is determined. The previous some limitations on the dynamic output feedback variable structure controller is overcome in this systematic design. A stabilizing control is designed to generate the sliding mode on the predetermined sliding surface S=0 and as a results the closed loop exponential stability is obtained and proved together with the existence condition of the sliding mode on S=0 for all unmatched system matrix uncertainties. To show the usefulness of the algorithm, a design example and computer simulations are presented.

• 정보처리학회논문지A
• /
• 제9A권3호
• /
• pp.371-378
• /
• 2002

EMFG(Extended Mark Flow Graph)는 이산시스템을 표현하는데 유용한 그래프 도구로 알려져 있다. 본 연구에서는 EMFG에서 각 트랜지션이 점화하였을 때의 입출력 박스의 마크 변화량을 입출력 행렬로 표현하였고, 이를 사용하여 EMFG의 접속행렬을 구하였다. 점화가능벡터를 구하기 위하여 각 트랜지션의 점화조건을 점화조건행렬로 표현하였으며, 각 트랜지션의 점화완료 상태를 판단하기 위하여 점화완료벡터를 도입하였다. 이들을 사용하여 EMFG의 모든 동작과정이 수학적으로 해석될 수 있도록 EMFG의 동작해석 알고리즘을 개선하였다. 제안된 알고리즘을 정회전과 역회전을 반복하는 시스템에 적용하여 알고리즘이 올바르게 동작하는 것을 확인하였다. 제안된 알고리즘은 다양한 이산 시스템을 분석하는데 유용하다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.323-325
• /
• 2009

In this paper, we present simulation results of Dynamic Matrix Control(DMC) to a boiler steam temperature. In order to control of steam temperature, we choose the input-output variables and generate the step response model by each input variable's step test. After that, the control structure executes on-line control with optimization using step response model. Proposed controller is applied to the APESS(Doosan company's boiler model simulator) and it is observed that the simulation results show satisfactory performance of proposed control.