• Ocean and Polar Research
• /
• v.30 no.4
• /
• pp.509-518
• /
• 2008

Distribution of bacterial abundance and production was investigated in seawater around Saemangeum dike 7 times during March, $2007{\sim}July$, 2008. In the inner area of the dike, salinity variation was great due to river runoff from Mangyung and Dongjin Rivers and high chlorophyll a (chl a) concentrations up to $124.3{\mu}g\;l^{-1}$ was found. In the outer area of the dike, salinity was higher than in the inner area of the dike, and chl a was lower up to 10 times than in the inner area of the dike. Thus, the area of Saemangeum showed meso- to hypereutrophic conditions. Bacterial abundance and production ranged from 0.3 to $4.3{\times}10^9\;cells\;l^{-1}$ and from 5.2 to $570 pmol\;l^{-1}h^{-1}$ in outer area of the dike, respectively, while in the inner area of the dike bacterial abundance and production was 3 to 4 times higher ($0.4{\sim}12.7{\times}10^9\;cells\;l^{-1}$ and $12.3{\sim}1309\;pmol\;l^{-1}h^{-1}$, respectively) than those in the outer area. In both areas, bacterial abudance and production was highest in summer and lowest in winter. However, the variations of bacterial parameters was very large in each season. These large variations seemed to be related with the supply of organic matter. Bacterial abundance and production showed significant negative correlations with salinity in the inner area, suggesting that allochthonous organic matter input by river runoff could be an important factor in regulating the distribution of bacterial abundance and production. In addition, bacterial production also correlated positively with chl a in the inner area, suggesting that autochthonous substrate might be another regulating factor of bacterial growth in the area. These results suggest that the supply of both allochthonous organic substrates introduced by river runoff and autochthonous substrates produced by phytoplankon could be important in regulating bacterial growth and utilization of organic matter in the area. Thus, to manage water quality in the inner area of dike, it seems to be important to lower the load of both organic and inorganic nutrients from adjacent rivers.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.2
• /
• pp.71-77
• /
• 2016

The dielectric barrier discharge (DBD) has low efficiency due to about 70% input power is consumed as thermal energy in the discharge space. However, because of the usage of DBD ozone generator is easier than other methods. The DBD ozone generator has been widely applied for high concentration ozone generation in the industrial application. But, the low-capacity compact DBD ozone generator is not applied so far. Therefore, the DBD ozone generator is necessary to improve ozone production efficiency and reduce the capacity. In this paper, the stainless steel pipe inner electrode was designed with hall type and screw type to improve the ozone production yield. The manufactured two inner electrodes were experimented with normal type for comparison of the discharge characteristics and the ozone generating characteristics. As the experimental results, the discharge current effective value of designed inner electrodes with hall type and screw type are higher than the normal type, due to unequal electric field is formed at the boundary. However, the difference of designed and original electrodes is less than 0.1mA that has no effect on the discharge characteristic. On the other hand, the screw type inner electrode increased higher than original model about 7 times when the flow rate of the oxygen source gas was increased from $0.6{\ell}/min$ to $1.0{\ell}/min$ The reason was assumed by the flow rate of the raw gas through the inner electrode was became fast that has a cooling effect. The designed hall type and screw type inner electrodes have shown good performances in ozone generation and ozone production that better than normal type in the same electrode surface area.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.1
• /
• pp.70-74
• /
• 2008

In the field of camera motion research, it is widely held that the position (movement) and pose (rotation) of cameras are correlated and cannot be independently separated. A new equation based on inner product is proposed here to independently separate the position and pose. It is proved that the position and pose are not correlated and the equation is applied to estimation of the camera exterior parameters using a real image and 3D data.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.237-242
• /
• 2004

Cell growth and the production of pullulan by Aureobasidium pullulan HP-2001, the UV-induced mutant of A pullulans ATCC 42023, increased with increased concentration of glucose up to 15.0% (w/v). Maximal production of pullulan in the flask scale was 27.65 g/l, when concentrations of glucose and yeast extract were 15.0 and 0.25% (w/v), respectively. Maximal conversion rate of pullulan from glucose as the carbon source was 0.37, when those of glucose and yeast extract were 5.0 and 0.15% (w/v), respectively. On the basis of total amount of pullulan, the conversion rate of pullulan from glucose, and utilization rate of glucose to cell mass and pullulan by A. pullulans HP-2001, the optimal concentrations of glucose and yeast extract for the mass production of pullulan were determined to be 10.0 and 0.25% (w/v), respectively, at which concentrations the production of pullulan and its conversion rate were 27.14 g/l and 0.27, respectively. Maximal production of pullulan with optimized concentrations of carbon and nitrogen sources by A. pullulans HP-200l in a 7-1 bioreactor was 32.12 g/l for 72 h culture, and that in a 100-1 bioreactor with the inner pressure of $0.4 kgf/cm^2$ was 36.87 g/l. Increased inner pressure of a 100-1 bioreactor resulted in a higher concentration of dissolved oxygen in the medium, which might enhance the production of pullulan by A. pullulans HP-2001.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.1
• /
• pp.71-76
• /
• 2015

Magnesium sulfate is widely used as a food additive and as an orally administered medication. The aim of this study was to evaluate the possible cytotoxicity of magnesium sulfate on AGS human gastric adenocarcinoma cells and gastric mucosa in mice. A trypan blue exclusion assay was used to determine the reduction in viability of AGS cells exposed to magnesium sulfate, and then effects on cell proliferation were quantified. The role of magnesium sulfate-mediated pro-inflammatory cytokine production in AGS cells was also investigated. mRNA expression for IL-$1{\beta}$, IL-6, IL-8, and TNF-${\alpha}$ was determined by RT-PCR, and secretion of these cytokines was measured by ELISA. Immunohistochemical evaluation of IL-$1{\beta}$, IL-6, and TNF-${\alpha}$ expression was conducted in mouse gastric mucosa. Addition of 3 to 50 mM magnesium sulfate to AGS cells inhibited both cell proliferation and cell viability in a dose-dependent manner. Magnesium sulfate had little effect on production of IL-$1{\beta}$ or IL-6 but significantly inhibited production of IL-8. The animal model demonstrated that magnesium sulfate induced production of IL-$1{\beta}$, IL-6, and TNF-${\alpha}$. These preliminary data suggest that magnesium sulfate had a direct effect on the stomach and initiates cytotoxicity in moderate concentrations and time periods by inhibiting viability a nd proliferation of AGS cells and by regulating expression and/or release of pro-inflammatory cytokines.

• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.110-117
• /
• 2016

It is a essential to minimize production of by-products for economically effective petrochemical process. In order to find key factor to achieve the effective process, 2-dimensional computational fluid dynamics considering a variety of physics such as convective and radiative heat transfer and thermal cracking of ethane are carried out. The reactor is modeled as an isothermal tube, whose length is 1.2 m and radius is 0.01 m, respectively. At first, the axial distribution of representative by-products in ethane thermal cracking are investigated in each inner wall temperature conditions. Then the comparison between concentration of propene($C_3H_6$) and ethane conversion is discussed with respect to inner wall temperature conditions too. Finally, both reaction rate and turbulent kinetic energy are used to identify the production mechanism of $C_3H_6$ under the intersection point in the plot for $C_3H_6$ molar concentration and ethane conversion.

• Korean journal of food and cookery science
• /
• v.32 no.1
• /
• pp.27-43
• /
• 2016

We conducted comparative analysis on the quality characteristics five different classes of the Songgi (Pine inner bark) Garaetteok with different pine inner bark 0%, 1%, 2%, 3%, and 4%, respectively. The experiment results show that color values of the Songgi Garaetteok pine inner bark powder, the L value highest in control group 72.91 while a value was highest in 4% group. As a result of measurements for three days, the moist content for control group and 1% group 48.89 and 51.65, respectively two hours production. On day 1, the moist content of all samples peaked. Harness peaked in control group 954.13, followed by 4% group. The DPPH radical scavenging ability of pine inner bark powder and the Songgi Garaetteok containing 4% pine inner bark highest at 11.61% and 7.14%, respectively. In evaluating antibiosis, the Songgi Garaetteok containing 4% pine inner bark the highest level of antibacterial activity. In sensory evaluation, the Songgi Garaetteok containing 2% pine inner bark received the highest score color, flavor, texture, taste and overall preference. The experiment that the Songgi Garaetteok pine inner bark powder has better antioxidative effect regular Songgi Garaetteok. Therefore, the Songgi Garaetteok 2% pine inner bark powder the most desirable of the Songgi Garaetteok containing pine inner bark.

• Fashion & Textile Research Journal
• /
• v.18 no.6
• /
• pp.776-786
• /
• 2016

This study intends to suggest production process of circular knitted jackets and dimensional change data of finished clothes after washing. the study provides pattern design method of circular knitted jackets by applying dimensional change. By doing so, the purpose of this study is to increase production efficiency through accurate order in consideration of loss amount of the fabrics in production. With the three fabric materials selected, this study investigated dimensional change of circular knitted jackets after sewing and washing by varying the parts to be attached to padding cloth and with or without inner lining. As for the fabric F-C (including the spandex, thicker and weightier than the other two fabrics), front width shrunk by 4.6%, which showed the biggest shrinkage among the jackets made of test fabrics. Then it suggested design methods of circular knitted jacket patterns to which dimensional change is applied according to materials, and analyzed the amount of fabric required for production by comparison of the materials. When using the fabric F-C without inner lining, there is big dimensional change and more than double amount of fabric is required. It is expected that the research results will be a basic data for pattern design and production process of circular knitted clothing.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.9
• /
• pp.1355-1359
• /
• 2014

To detect goat vascular endothelial growth factor (VEGF)-mediated regrowth of hair, full-length VEGF164 cDNA was cloned from Inner Mongolia cashmere goat (Capra hircus) into the pET-his prokaryotic expression vector, and the recombinant plasmid was transferred into E. coli BL21 cells. The expression of recombinant $6{\times}his-gVEGF164$ protein was induced by 0.5 mM isopropyl thio-${\beta}$-D-galactoside at $32^{\circ}C$. Recombinant goat VEGF164 (rgVEGF164) was purified and identified by western blot using monoclonal anti-his and anti-VEGF antibodies. The rgVEGF164 was smeared onto the dorsal area of a shaved mouse, and we noted that hair regrowth in this area was faster than in the control group. Thus, rgVEGF164 increases hair growth in mice.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.4
• /
• pp.305-312
• /
• 1990

The seasonal changes in production, the systems of management and the seasonal climatic and feeding conditions are described for three farms representative of the major areas for growing fine-wool sheep in northern China. At all farms, summer and autumn were seasons of rapid liveweight gain and wool growth. In the winter and spring, during lactation, liveweight declined wool growth decreased by approximately 70%, and fibre diameter by 4 to 8 microns. The wool produced was characterized by a very low clean wool yield (39-51%). Greasy fleece weights ranged from 4.5 to 8.0 kg and average diameter of wool fibres from 20.5 to 23 microns. The number of lambs born per 100 ewes mated ranged from 79 to 95, lamb weights ranged from 3.8 to 4.5 kg, and weaning weights ranged from 17 to 25 kg. Overall, the patterns of sheep production were similar to those found in seasonally arid environments (such as in the mediterranean climatic zone). Yield of clean wool and therefore clean fleece weights were far below those in most other fine-wool producing areas of the world.