• Journal of the Korean Ceramic Society
• /
• v.31 no.1
• /
• pp.55-61
• /
• 1994

Mn-Zn ferrite powder was obtained by wet method that was to be coprecipitated the metal ions of Fe2+, Mn2+ and Zn2+ with alkali solution. The target composition of the ferrite powder was 52 mol% Fe2O3, 24 mol% MnO, and 24 mol% ZnO, that was based on the region of high permeability. And the other ferrite powder was prepared by the dry method that was to be mixed the metal oxides as the above chemical composition. The wet method was compared with dry method for the powder properties and the electromagnetic characteristics of sintered cores. The synthesized powder by wet method was smaller particle size, narrower particle distribution, and higher purity than that of dry method. The initial permeability of sintered sample prepared by the wet method was 14000~28000, on the other side, 9000~15500 in case of the dry method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.89-92
• /
• 1999

NCZF ferrites doped with B-Bi-Zn(35-25-40) glass ceramics were prepared to investigate the magnetic properties. The XRD peaks of all of samples were observed only spinel phase. As the additive increased at sintering temperature 750$^{\circ}C$ and 850$^{\circ}C$ for 3 hours, the density and shrinkage increased until 5.28g/㎤ and 20%, respectively. According to SEM images, the growth of grain progressed rapidly at sintering temperature 850$^{\circ}C$ for 3 hours. Increasing the additive, initial permeability and complex permeability decreased. The complex permeabilities as a function of frequency showed high values at a12, a16, b11 and b16 sarmples.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.3
• /
• pp.92-103
• /
• 1979

The compaction of core zone of the fill dam is very important foe increasing of the Strength of soil mass and reduction of permeability of the core. The principal objects of this study are to give the construction criteria of tamping rollers and to find out the relationships between density and permeability of soil after compaction. The results in this study are summarized as follows. 1. The core zone of fill dam should be compacted more than 8 passed because the compaction effects of clayey soil increase sharply in about 8 passes of roller. 2. The coefficient of permeability (K) increases with the thickness of compaction of soil even though the density is same. 3. The effect of compaction increases with the quantity of coarse materials such as coarse sand and gravel. 4. If D values change from 100 percent to 98 percent and from 100 percent to 95 percent, K values become 2 times and 5 times of initial K value respectively. 5. The coefficient of permeability in the field soil is very high comparing with the result of laboratory test at the same 100 percent compaction ratio, but differences between both results decrease with the decrease of compaction ratio. 6. Thickness of soil layer for the compaction should be increased for heavier compaction machine. 7. In order to get the compaction ratio of 98 percent or more, 10 to 12 passes of roller is generally required with the thickness of soil from 20cm to 30cm.

• Geomechanics and Engineering
• /
• v.13 no.2
• /
• pp.285-300
• /
• 2017

Shallow coal resources are increasingly depleted, the mining has entered the deep stage. Due to "High stress, high gas, strong adsorption and low permeability" of coal seam, the gas drainage has become more difficult and the probability of coal and gas outburst accident increases. Based on the flow solid coupling theory of coal seam gas, the coupling model about stress and gas seepage of coal seam was set up by solid module and Darcy module in Comsol Multiphysics. The gas extraction effects were researched after applying hydraulic technology to increase permeability. The results showed that the effective influence radius increases with the expanded borehole radius and drainage time, decreases with initial gas pressure. The relationship between the effective influence radius and various factors presents in the form: $y=a+{\frac{b}{\left(1+{(\frac{x}{x_0})^p}\right)}}$. The effective influence radius with multiple boreholes is obviously larger than that of the single hole. According to the actual coal seam and gas geological conditions, appropriate layout way was selected to achieve the best effect. The field application results are consistent with the simulation results. It is found that the horizontal stress plays a very important role in coal seam drainage effect. The stress distribution change around the drilling hole will lead to the changes in porosity of coal seam, further resulting in permeability evolution and finally gas pressure distribution varies.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.2
• /
• pp.157-166
• /
• 2012

Most of the roads are paved with impermeable materials such as asphalt concrete and cement concrete, and in the event of heavy rainfall, rainwater directly flows into river through a drainage hole on the pavement surface. This large quantity of rainwater directly spilled into the river frequently leads to the flooding of urban streams, damaging lowlands and the lower reaches of a river. In recent years there has been a great deal of ongoing research concerning water permeability and drainage in pavements. Accordingly, in this research, a porous polymer concrete was developed for permeable pavement by using unsaturated polyester resin as a binder, recycled aggregate as coarse aggregate, fly ash and blast furnace slag as filler, and its physical and mechanical properties were investigated. Also, 3 types of permeable polymer block by optimum mix design were developed and rainfall runoff reduction effects by permeability pavement using permeable polymer block were analyzed based on hydraulic experimental model. The infiltration volume, infiltration ratio, runoff initial time and runoff volume in permeability pavement with permeable polymer block of $300{\times}300{\times}80$ mm were evaluated for 50, 100 and 200mm/hr rainfall intensity.

• Journal of Plant Biology
• /
• v.33 no.2
• /
• pp.135-140
• /
• 1990

The membrane potential in the subepidermal cells of Lemna gibba G3 fronds was measured in the dark with glass capillary microelectrodes. At pH 7, the membrane potential, approximately-215 mV, could be depolarized to -82∼-88 mV by 0.1 mM dicyclohexylcarbodiimide (DCCD) or by KCN at 0.3 mM or higher concentrations. When the pH of the medium was altered the potential showed reversible changes, while it revealed no response to the external pH changes when energy transduction across the membrane was being blocked by 0.1 mM DCCD. The results support an assumption that the active component of the membrane potential of Lemna subepidermal cells is generated by electrogenic H+ -pump. By the addition of 0.10∼5.00 mM salicylic acid(SA) to the bathing medium the membrane potential was depolarized to a great extent, and the removal of SA from the medium repolarized the potential showing almost complete recovery, 92.3∼97.6% to the initial levels. Although the potential was greatly depolarized by 5.0% or higher concentrations of dimethylsulfoxide (DMSO), the recovery rate by DMSO removal was decreased as the pretreatment concentration had increased. Twenty percent DMSO pretreatment limited the recovery at only 47.1%. The presence of SA in the bathing medium could reversibly increase the permeability of the plasmalemma. DMSO at its concentration of 5.0% or higher increased the permeability of the membrane by irrevesibly impairing the membrane component involved in the membrane permeability.

• Journal of the Korean Ceramic Society
• /
• v.34 no.10
• /
• pp.1074-1082
• /
• 1997

Microstructure and permeability as a function of sintering temperature and composition were studied on the Ni$\delta$Cu0.4-$\delta$Zn0.6Fe2O4 ($\delta$=0, 0.1, 0.2, 0.3, 0.4) which was prepared by Cu2+ substitution for Ni2+ in Ni.0.4Zn0.6Fe2O4, then followed by 8 wt% CuO and 1wt% Bi2O3 as sintering aids. It was found that NiCuZn ferrite in which Cu2+ is substituted for Ni2+ is more effective in reduction of sintering temperature than Ni.0.4Zn0.6Fe2O4, containing CuO as a sintering aid. The specimen $\delta$=0.2 sintered at 90$0^{\circ}C$ for 2hr exhibited the highest initial permeability value ($\mu$o=280 at 1Mhz), but the real permeability decreased at the frequency under 10 MHz. EPMA analysis showed that Ni$\delta$Cu0.4-$\delta$Zn0.6Fe2O4 ($\delta$=0.4), sintered at 95$0^{\circ}C$ for 2hrs consisted of three phase regions of Ni.0.3Cu0.1Zn0.6Fe2O4 region, Cu and Bi liquid existed at the 3-point boundary, although the stabilization energy of Ni2+ is higher than that of Cu2+ in B site.

• Korean Journal of Materials Research
• /
• v.13 no.4
• /
• pp.228-232
• /
• 2003

The effects of$ Nd_2$$O_3$addition on the properties of Mn-Zn ferrite were investigated in the doping concentration range from 0.05 to 0.25 wt%. All samples were prepared by standard fabrication of ferrite ceramics. With increasing the Neodymium oxides, specific density and initial permeability increased on the whole. But, the tendencies such as upper result had the measured value on limitation and characteristics saturated or decreased properties after that. With increasing the content of Neodymium oxides. both the real and imaginary component of complex permeability and the magnetic loss(tan$\delta$) increased. Because reason that magnetic loss increases is high ratio that a real department increases than imaginary department. Magnetic loss increased none the less for increasing the real department related with magnetic permeability. But, the magnetic loss of ferrite doped with the Neodymium oxides were lower than that of none doped Mn-Zn ferrite. The small amount of percent Neodymium oxides in Mn-Zn ferrite composition led to enhancement of resistivity in bulk, and more so in the grain boundary.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.4
• /
• pp.69-83
• /
• 1999

The permeability of converter slag, replacing material of sand mat on improving soft clay foundation, was evaluated in the laboratory. The effects of grain size, flow water time and aging were investigated using sea and fresh water. In the case of converter slag submerged with fresh water, the coefficients of permeability in A and B samples less than 10 mm grain sizes were measured as $6.52\times10^{-2}cm\; per\; sec\; and\; 5.99\times10^{-1}/cm$ per sec respectively, while they were $1.88\times10^{-2}/cm\; per\; sec,\; 3.86\times10^{-1}/cm$ per sec respectively under sea water condition. Also, the condition of turbulent flow may exit and was experimentally identified from the relationship between hydraulic gradient and seepage velocity. After 100 days under sea water condition, the coefficients of permeability of A and B samples decreased ten times than initial values. The reduction of permeability coefficient was considered to result from the filling of voids in high-calcium quicklime(CaO).

• International Journal of Oral Biology
• /
• v.36 no.1
• /
• pp.23-29
• /
• 2011

Porphyromonas gingivalis, one of the major periodontal pathogens, is implicated in the initiation and progression of periodontal disease. The initial stages of periodontal inflammation are accompanied by vascular hyperpermeability. In our present study, we report that the P. gingivalis lipopolysaccharide (LPS) increases the mRNA expression of interleukin-8 (IL-8), a major inducer of vascular permeability, in vascular endothelial cells. P. gingivalis LPS also stimulated the induction of IL-8 secretion in endothelial cells. The P. gingivalis LPS-induced expression of IL-8 was primarily modulated by nuclear factor-${\kappa}$B(NF-${\kappa}$B). P. gingivalis LPS significantly enhanced the vascular permeability both in vitro and in vivo, and a blockade of the IL-8 receptor decreased the P. gingivalis LPS-induced vascular permeability. Taken together, these results suggest that P. gingivalis LPS increases vascular permeability through the NF-${\kappa}$B-dependent production of IL-8 in vascular endothelial cells.