• 제어로봇시스템학회논문지
• /
• 제3권1호
• /
• pp.101-108
• /
• 1997

The initial token value required to the optimal performance of discrete event systems can be decided by Sum of Delay Time and Synchronic Time ratio, which are new synchronic variables in Timed Place Petri Nets. For the system consisting of two Live-and-Bounded circuits(LB-circuits) fused in common Transition-Transition-Path or common Place-Place-Path, we prove that the Synchronic Time Ratio is the initial token ratio between two LB-circuits to optimally perform system functions. These results are generalized and formulated as a theorem. The initial tokens of a specific place can imply shared resources. Using the theorem, we can decide the minimum number of the shared resources to obtain the optimal performance, and minimize the idling time of resources. As an example, an automated assembly system is modeled by Timed Place Petri Net, and the initial tokens to achieve the optimal system performance are identified. All the values are verified by simulation.

• 제어로봇시스템학회논문지
• /
• 제14권6호
• /
• pp.595-602
• /
• 2008

In this paper, performance of the initial alignment for INS whose attitude is not leveled is investigated. Observability of the initial alignment filter is analyzed and estimation errors of the estimated state variables are derived. First, the observability is analyzed using the rank test of observability matrix and the normalized error covariance of the Kalman filter based on the 10-state model. In result, it can be seen that the accelerometer biases on horizontal axes are unobservable. Second, the steady-state estimation errors of the state variables are derived using the observability equation. It is verified that the estimates of the state variables have errors due to the unobservable state variables and the non-leveling tilt angles of a vehicle containing the INS. Especially, this paper shows that the larger the tilt angles of the vehicle are, the larger the estimation errors corresponding to the sensor biases are. Finally, it is shown that the performance of the 8-state model excepting the accelerometer biases on horizontal axes is better than that of the 10-state model in the initial alignment by simulation.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권11호
• /
• pp.1448-1456
• /
• 1999

In this paper, we propose a new technique for path-following of the wheeled mobile robot systems with nonholonomic constraints using a path-observer. We discuss the path-following problems of the nonholonomic mobile robot systems which have two nonsteerable, independently driven wheels with the various initial conditions such as a position, a heading angle, and a velocity. It is shown that the performance of dynamic path-following importantly is affected by the intial conditions. Particularly, if the initial conditions become more distant from the desired path and the desired velocity become faster, the system is shown to have worse performance and small time local stable. To find the controllable and stable control for path-following with various initial configuration, we propose the path-observer which can be used for control of the stable path-following of nonholonomic mobile robot system with the various initial conditions. The proposed scheme exhibits the efficient path-following properties for nonholonomic mobile robot in any intial conditions. The simulation results demonstrate the effectiveness of the proposed method for dynamic path-following tasks with the various initial conditions.

• 한국항공우주학회지
• /
• 제34권5호
• /
• pp.65-73
• /
• 2006

위성이 발사체로부터 분리될 때 초기 각속도가 발생한다. B-dot 로직은 일반적으로 위성의 초기각속도 제어에 사용되나, 상대적으로 제어시간이 많이 소요된다는 단점이 있다. 이런 문제를 해결하기 위해 본 논문에서는 피치 바이어스 모멘텀 방식을 사용하는 초소형 위성에 적용 가능한 디텀블링(detumbling) 방식을 새롭게 제안하였다. 제안된 디텀블링 방식은 제어시간이 약 20분 이내로 기존의 방식에 비해 상당한 시간을 줄일 수 있다. 본 논문에서 제안한 디텀블링 방식을 사용할 경우 기존의 모멘텀 휠 초기구동 방식을 사용할 수 없다. 따라서 휠의 속도를 안정적으로 공칭 속도까지 증가시키는 방식을 제안하고 시뮬레이션을 통해 비교, 검증하였다. 시뮬레이션 결과 기존의 방식과 비교했을 때 제어시간을 단축할 수 있었으며 휠의 공칭 속도와 3축 안정화를 이룰 수 있었다.

• 대한수의학회지
• /
• 제46권1호
• /
• pp.27-34
• /
• 2006

This paper describes the slaughter check results of breeding pigs from the Korean Swine Testing Station for the control of endemic diseases. Gross lesions monitored in the present study included those conditions commonly associated with economically significant subclinical herd infections: enzootic pneumonia, pleuropneumonia, pleuritis, atrophic rhinitis, liver white spots, papular dermatitis and ileitis. A total of 128 slaughter pigs were investigated at 4 subsequent tests according to the slaughter check procedures established. The prevalence of enzootic pneumonia, pleuropneumonia and pleuritis in the initial test was 67.9%, 28.6% and 17.9%, respectively. However, these were decreased to 46.7%, 6.7% and 6.7%, respectively, in the last test after implementation of counter measures including clean-up protocols and medication programs (p > 0.05). The mean pneumonic score also significantly decreased from 6.8 in the initial test to 2.8 in the last test. The prevalence of atrophic rhinitis (${\geq}score\;2$) was 32.2% and mean atrophic rhinitis score of 1.1 were recorded. However, no significant improvement of conditions was achieved with the counter measures indicating that atrophic rhinitis was originated from the source herds and lesions developed early in the life. In the initial test, prevalence of liver white spots and papular dermatitis lesions was 21.4% and 25.0%, respectively. These conditions were cleaned by the implementation of parasite control measures with all-in all-out, strict clean-up protocols and proper medications adopted in the present study (liver white spots, p = 0.0124; papular dermatitis lesions, p = 0.0055). The prevalence of ileitis lesions in slaughter pigs from the initial test was 28.6%, it could be gradually reduced by the use of repeated treatments and control measures but the effect was not so significant (p > 0.05). In conclusion, slaughter check procedures were successfully established and applied for the control of endemic diseases in the Korean Swine Testing Station.

• 한국공작기계학회논문집
• /
• 제13권4호
• /
• pp.16-22
• /
• 2004

Shape optimization was performed to obtain the precise shape of cutouts including the internal shape of cutouts in laminated composite plates by three dimensional modeling using solid element. The volume control of the growth-strain method was implemented and the distributed parameter chosen as Tsai-Hill fracture index for shape optimization. The volume control of the growth-strain method makes Tsai-Hill failure index at each element uniform in laminated composites under the initial volume. Then shapes optimized by Tsai-Hill failure index were compared with those of the initial shapes for the various load conditions and cutouts. The following conclusions were obtained in this study (1) It was found that growth-strain method was applied efficiently to shape optimization of three dimensional cutouts in a laminated composite plate, (2) The optimal shapes on the various load conditions and cutouts were obtained, (3) The maximum Tsai-Hill failure index was reduced up to 67% when shape optimization was performed under the initial volume by volume control of growth-strain method.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2006년도 한국우주과학회보 제15권1호
• /
• pp.121-124
• /
• 2006

B-dot 로직은 일반적으로 위성의 초기각속도 제어에 사용되나, 상대적으로 제어시간이 많이 소요된다는 단점이 있다. 이런 문제를 해결하기 위해 본 논문에서는 피치 바이어스 모맨텀 방식을 사용하는 초소형 위성에 적용 가능한 디텀블링(detumbling) 방식을 새롭게 제안하였다. 제안된 디텀블링 방식은 제어시간이 약 20분 이내로 기존의 방식에 비해 상당한 시간을 줄일 수 있다.

• 한국산학기술학회논문지
• /
• 제1권2호
• /
• pp.49-55
• /
• 2000

본 논문에서는 피드백 사용형 2차 반복 학습제어 방법이 수렴 성능의 향상과 외란에 대한 강인성 향상에 덧붙여 학습제어의 피드백 항을 이용함으로써 초기 조건 오차가 있음에도 불구하고 이를 극복할 뿐만 아니라 기존의 알고리즘보다 더 빠른 수렴 능력이 있음을 확인한다. 또한 불안정한 결과를 낳는 높은 학습 제어 게인의 경우에도 피드백 항을 추가한 본 학습제어 방법에 의해 안정화됨으로써, 빠른 응답 특성과 강인성 향상을 가져올 수 있음을 보인다. 그리고 본 알고리즘을 선형화시킨 로보트 매니 퓰레이터의 선형 시변 시스템 모델에 대해 적용한 시뮬레이션 결과를 통해 초기 조건 오차의 극복 능력이 뛰어남을 확인하고 시스템의 안정화와 강인성 향상에 기여함을 확인한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.297-298
• /
• 2007

Repetitive systems stand for a kind of systems that perform a simple task on a fixed pattern repetitively and are widely spread in industrial fields. Hence, those systems have been of much interests by many researchers, especially in the field of iterative learning control (ILC). In this paper, we propose a finite-horizon tracking control scheme for linear time-varying repetitive systems with uncertain initial conditions. The scheme is derived both analytically and numerically for state-feedback systems and only numerically for output-feedback systems. Then, it is extended to stable systems with input constraints. All numerical schemes are developed in the forms of linear matrix inequalities. A distinguished feature of the proposed scheme from the existing iterative learning control is that the scheme guarantees the tracking performance exactly even under uncertain initial conditions. The simulation results demonstrate the good performance of the proposed scheme.

• 대한물리의학회지
• /
• 제16권3호
• /
• pp.15-20
• /
• 2021

PURPOSE: This study examined the influence of treadmill exercise with initial pain control using transcutaneous electrical nerve stimulation (TENS) on induced pain of knee osteoarthritis in rats. METHODS: Thirty adult male Sprague - Dawley rats were divided randomly into the TENS Group (TG, n = 10), Treadmill Exercise Group (TEG, n = 10), and Treadmill with TENS Group (TTG, n = 10). In the TG, TENS was performed for 20 min per day for two weeks with a TENS program at the knee joint. The TEG performed treadmill exercise 15 m/min for 20 min per day for two weeks. The TTG performed initial pain control by TENS program during the 1st ~ 3rd days, and treadmill exercise was performed using the TEG methods from the 4th day. The lumbar spine was extracted and processed using western blot analysis to evaluate pain (c-fos expression). RESULTS: The results showed that c-fos expression was decreased significantly in all groups after each intervention (p < .05). In particular, TTG produced the most significant decrease compared to the other groups. CONCLUSION: These results suggest that treadmill exercise with initial pain control using TENS is a suitable method for relieving pain in knee osteoarthritis.