• Journal of Life Science
• /
• v.29 no.3
• /
• pp.354-361
• /
• 2019

The red pepper (Capsicum annuum L.) is one of the most important vegetables in traditional Korean food, containing vitamins A, C, and E, polyphenol, and flavonoids. In addition, red peppers have high anti-oxidant ability and are known to be effective in preventing obesity, diabetes, hypertension, digestive disorders, stress, and aging. In this study, we investigated the effects against obesity and diabetes of both fermented and non-fermented red pepper. C57BL/6N mice with induced obesity from an eight-week 45% high fat diet (HFD) were then fed either an HFD or diets containing 2.5% non-fermented red pepper marc (NRM), 1.25% fermented red pepper marc (FRM), or 2.5% FRM for a further eight weeks. An oral glucose tolerance test was performed seven weeks after dietary intake, and body weight, liver, epididymal fat weight, serum insulin level, and HOMA-IR were measured and a lipid content test performed at eight weeks. The results show that the 2.5% FRM diet reduced body and tissue weight, lipid content, serum insulin levels, and HOMA-IR compared to the 2.5% NRM and HFD diets. These results suggest that fermented red pepper is effective against obesity and diabetes. We will use this information as the basic data for the development of health food materials using red pepper.

• (The) Research of the performance art and culture
• /
• no.36
• /
• pp.75-102
• /
• 2018

Manjungpan Chunhyangga is established by Manjung Kim Sohee. She selectively chose and arranged the songs by Jung Jungryeol, Song Mangap, Jung Eungmin, Kim Yeonsoo, Park Dongsil, and Jung Kwangsil. Kim Sohee once stated that while a major section of Chunhyangga is based on the songs by Jung Jungryeol, Song Mangap, Jung Eungmin, and Kim Yeonsoo, the whole part of Okjungga is derived from Park Dongsil. However, there is not much material that will provide enough information with regard to what musical characteristics Park Dongsilje Chunhyangga possessed. Under the circumstances, the voice of Park Dongsilje, left by Kim Sohee, triggers curiosity on Park Dongsilje Chunhyangga. It can also be construed that there must be a good reason for choosing Park Dongsilje for Okjungga, unlike other parts. Therefore, this paper attempted to find out what the unique features of Par Dongsilje are and what the reasons behind Kim Sohee's musical choice were through comparison and analysis of Kim Sohee's musical features in Okjungga. The following are the results. Firstly, Okjungga is a created verse by its nature and it does not possess specific features to a school. Therefore, the reason for choosing Park Dongsilje could have been based on musical reason rather than verse. Secondly, the lyrics of Park Dongsilje Okjungga is closer to that of Song Mangap rather than that of Jung Jungryeolje. It can be argued that it falls between the two of them. Thirdly, the tone and melody of Park Dongsilje Okjungga falls in the middle section of Dongpyenje and Supyenje. Fourthly, the analysis of Jinyangjo rhythm out of the whole Manjungpan Chunhyangga shows that there are slight differences among Song Mangapje, Jung Jungryeolje, and Jung Eungminje. Park Dongsilje is very unique in the sense that it does not use utbutim in gyemyeonjo part in Manjungpan Chunhyangga. Park Dongsilje Okjungga is a song to which the tone, melody, and sigimsae of Supyeonje is added to lyric butimsae of Dongpyeonje. It can be seemed as simple and less sophisticated because, with its simple lyric butimsae, it shows a less complicated tone utilization rather than Jung Jungryeol. With lighter decoration of music, feelings can be conveyed more directly. That is probably why Kim Sohee commented on Park Dongsilje Chunhyangga that it is the most mournful song for Chunhyang and it is the song that moves anyone who listens to the song. Consequently, Kim Sohee accepted Park Dongsilje Okjungga and she created different feelings to Manjungpan Chunhyangga which has repeatedly displayed the color of Jung Jungryeol. Combining the lyric addition of Dongpyeon style and the melody of Supyeon style can crated a different language.

• Journal of the Korean Society of Radiology
• /
• v.13 no.2
• /
• pp.193-200
• /
• 2019

The study was conducted surveying ultrasound room workers on hospital infection awareness in Daejeon and Choong-chunng region. The contamination of ultrasonic probes used in clinical trials was measured using ATP, and the results were verified after using 70% alcohol sterilization. It was measured on the group's general characteristics and the specific categories such as academic background, job type, having professional certificate and infection education. After the examination, the gel removal and method, disinfection status of the probe and variable correlation analysis were performed to analyze the recognition of the ultrasonic probe disinfection. After examination in ultrasound room, it was found that towels were used the most for cleaning, and the gel container was not replaced for more than three months. After 70% alcohol disinfection, ATP contamination was reduced from $1055.4{\pm}944.2$ to $133.5{\pm}93.2$ and the result was analyzed to be statistically significant.(${\rho}<0.01$) The found bacteria were CNS, Gram positive bacillus, and Micrococcus specs. In order to solve this problem, 70% alcohol sterilization was applied and the bacteria were not detected after the treatment. The research shows that regular training on infection control and efforts to prevent infection are necessary, and that 70% alcohol is effective in disinfect the bacteria. Therefore, the medical institution should provide active hospital infection control education to improve the awareness of hospital infection among workers and contribute to the prevention of patient infection. It is also understood that proper use of the results of this study will help prevent infection by means of ultrasonic probes.

• Journal of Chest Surgery
• /
• v.52 no.4
• /
• pp.248-329
• /
• 2019

Background: Though clinical practice guidelines (CPGs) for cardiac rehabilitation (CR) are an effective and widely used treatment method worldwide, they are as yet not widely accepted in Korea. Given that cardiovascular disease is the second leading cause of death in Korea, it is urgent that CR programs be developed. In 2008, the Government of Korea implemented CR programs at 11 university hospitals as part of its Regional Cardio-Cerebrovascular Center Project, and 3 additional medical facilities will be added in 2019. In addition, owing to the promotion of CR nationwide and the introduction of CR insurance benefits, 40 medical institutions nationwide have begun CR programs even as a growing number of medical institutions are preparing to offer CR. The purpose of this research was to develop evidence-based CPGs to support CR implementation in Korea. Methods: This study is based on an analysis of CPGs elsewhere in the world, an extensive literature search, a systematic analysis of multiple randomized control trials, and a CPG management, development, and assessment committee comprised of 33 authors-primarily rehabilitation specialists, cardiologists, and thoracic surgeons in 21 university hospitals and 2 general hospitals. Twelve consultants, primarily rehabilitation, sports medicine, and preventive medicine specialists, CPG experts, nurses, physical therapists, clinical nutritionists, and library and information experts participated in the research and development of these CPGs. After the draft guidelines were developed, 3 rounds of public hearings were held with staff members from relevant academic societies and stakeholders, after which the guidelines were further reviewed and modified. Results: CR involves a more cost-effective use of healthcare resources relative to that of general treatments, and the exercise component of CR lowers cardiovascular mortality and readmission rates, regardless of the type of coronary heart disease and type and setting of CR. Conclusion: Individualized CR programs should be considered together with various factors, including differences in heart function and lifestyle, and doing so will boost participation and adherence with the CR program, ultimately meeting the final goals of the program, namely reducing the recurrence of myocardial infarction and mortality rates.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.3
• /
• pp.31-38
• /
• 2019

This study quantified, through a direct harvesting method, storage and annual uptake of carbon from open-grown trees for three landscape tree species frequently planted in the southern region of Korea, and developed quantitative models to easily estimate the carbon reduction by tree growth for each species. The tree species for the study included Camellia japonica, Lagerstroemia indica, and Quercus myrsinaefolia, for which no information on carbon storage and uptake was available. Ten tree individuals for each species (a total of 30 individuals) were sampled considering various stem diameter sizes at given intervals. The study measured biomass for each part of the sample trees to quantify the total carbon storage per tree. Annual carbon uptake per tree was computed by analyzing the radial growth rates of the stem samples at breast height or ground level. Quantitative models were developed using stem diameter as an independent variable to easily calculate storage and annual uptake of carbon per tree for study species. All the quantitative models showed high fitness with $r^2$ values of 0.94-0.98. The storage and annual uptake of carbon from a Q. myrsinaefolia tree with dbh of 10 cm were 24.0 kg and 4.5 kg/yr, respectively. A C. japonica tree and L. indica tree with dg of 10 cm stored 11.2 kg and 8.1 kg of carbon and annually sequestered 2.6 kg and 1.2 kg, respectively. The above-mentioned carbon storage equaled the amount of carbon emitted from the gasoline consumption of about 42 L for Q. myrsinaefolia, 20 L for C. japonica, and 14 L for L. indica. A tree with the diameter size of 10 cm annually offset carbon emissions from gasoline use of approximately 8 L for Q. myrsinaefolia, 5 L for C. japonica, and 2 L for L. indica. The study pioneers in quantifying biomass and carbon reduction for the landscape tree species in the southern region despite difficulties in direct cutting and root digging of the planted trees.

• Journal of Arbitration Studies
• /
• v.29 no.2
• /
• pp.239-282
• /
• 2019

The importance of ADR(Alternative Dispute Resolution), which has the advantage of expertise, speed and neutrality due to the increase of arbitration cases due to domestic and foreign construction disputes, has emerged. Therefore, in order for the nation's arbitration system and the arbitration Organization to jump into the ranks of advanced international mediators, it is necessary to research the characteristics and advantages of these arbitration Organization through a study of prior domestic and foreign research and operation of international arbitration Organization. As a problem, First, education for the efficient promotion of arbitrators (compulsory education, maintenance education, specialized education, seminars, etc.). second, The effectiveness of arbitration in resolving construction disputes (hearing methods, composition of the tribunal, and speed). third, The issue of flexibility and diversity of arbitration solutions (the real problem of methodologies such as mediation and arbitration) needs to be drawn on the Arbitration laws and practical problems, such as laws, rules and guidelines. Therefore, Identify the problems presented in the preceding literature and diagnosis of the defects and problems of the KCAB by drawing features and benefits from the arbitration system operated by the international arbitration Institution. As an improvement, the results of an empirical analysis are derived for "arbitrator" simultaneously through a recognition survey. As a method of improvement, First, as an optimal combination of arbitration hearing and judgment in the settlement of construction disputes,(to improve speed). (1) A plan to improve the composition of the audit department according to the complexity, specificity, and magnification of the arbitration cases - (1)Methods to cope with the increased role of the non-lawyer(Specialist, technical expert). (2)Securing technical mediators for each specialized expert according to the large and special corporation arbitration cases. (2) Improving the method of writing by area of the arbitration guidelines, second, Introduction of the intensive hearing system for psychological efficiency and the institutional improvement plan (1) Problems of optimizing the arbitration decision hearing procedure and resolution of arbitration, and (2) Problems of the management of technical arbitrators of arbitration tribunals. (1)A plan to expand hearing work of technical arbitrator(Review on the introduction of the Assistant System as a member of the arbitration tribunals). (2)Improved use of alternative appraisers by tribunals(cost analysis and utilization of the specialized institution for calculating construction costs), Direct management of technical arbitrators : A Study on the Improvement of the Assessment Reliability of the Appraisal and the Appraisal Period. third, Improvement of expert committee system and new method, (1) Creating a non-executive technical committee : Special technology affairs, etc.(Major, supports pre-qualification of special events and coordinating work between parties). (2) Expanding the standing committee.(Added expert technicians : important, special, large affairs / pre-consultations, pre-coordination and mediation-arbitration). This has been shown to be an improvement. In addition, institutional differentiation to enhance the flexibility and diversity of arbitration. In addition, as an institutional differentiation to enhance the flexibility and diversity of arbitration, First, The options for "Med-Arb", "Arb-Med" and "Arb-Med-Arb" are selected. second, By revising the Agreement Act [Article 28, 2 (Agreement on Dispute Resolution)], which is to be amended by the National Parties, the revision of the arbitration settlement clause under the Act, to expand the method to resolve arbitration. third, 2017.6.28. Measures to strengthen the status role and activities of expert technical arbitrators under enforcement, such as the Act on Promotion of Interestments Industry and the Information of Enforcement Decree. Fourth, a measure to increase the role of expert technical Arbitrators by enacting laws on the promotion of the arbitration industry is needed. Especially, the establishment of the Act on Promotion of Intermediation Industry should be established as an international arbitration agency for the arbitration system. Therefore, it proposes a study of improvement and differentiation measures in the details and a policy, legal and institutional improvement and legislation.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.2
• /
• pp.142-157
• /
• 2015

This study examines how traditional knowledge functions in the specific techniques to make pottery in terms of the traditional knowledge on the pottery techniques of Onggi potters. It focuses on how traditional pottery manufacturing skills are categorized and what aspects are observed with regard to the techniques. The pottery manufacturing process is divided into the preparation step of raw material, the molding step of pottery, and the final plasticity step. Each step involves unique traditional knowledge. The preparation step mainly comprises the knowledge on different kinds of mud. The knowledge is about the colors and properties of mud, the information on the regional distribution of quality mud, and the techniques to optimize mud for pottery manufacturing. The molding step mainly involves the structure and shape of spinning wheels, the techniques to accumulate mud, ways to use different kinds of tools, the techniques to dry processed pottery. The plasticity step involves the knowledge on kilns and the scheme to build kilns, the skills to stack pottery inside of the kilns, the knowledge on firewood and efficient ways of wood burning, the discrimination of different kinds of fire and the techniques to stoke the kilns. These different kinds of knowledge may be roughly divided into three categories : the preparation of raw material, molding, and plasticity. They are closely connected with one another, which is because it becomes difficult to manufacture quality pottery even with only one incorrect factor. The contents of knowledge involved in the manufacturing process of pottery focused are mainly about raw material, color, shape, distribution aspect, fusion point, durability, physical property, etc, which are all about science. They are rather obtained through the experimental learning process of apprenticeship, not through the official education. It is not easy to categorize the knowledge involved. Most of the knowledge can be understood in the category of ethnoscience. In terms of the UNESCO world heritage of intangible cultural assets, the knowledge is mainly about 'the knowledge on nature and universe'. Unique knowledge and skills are, however, identified in the molding step. They can be referred to 'body techniques', which unify the physical stance of potters, tools they employ, and the conceived pottery. Potters themselves find it difficult to articulate the knowledge. In case stated, it cannot be easily understood without the experience and knowledge on the field. From the preparation of raw material to the complete products, the techniques and traditional knowledge involved in the process of manufacturing pottery are closely connected, employing numerous categories and levels. Such an aspect can be referred to as a 'techniques chain'. Here the techniques mean not only the scientific techniques but also, in addition to the skills, the knowledge of various techniques and levels including habitual, unconscious behaviors of potters.

• Journal of Ginseng Culture
• /
• v.1
• /
• pp.93-109
• /
• 2019

This study aims to look at the process of ginseng being removed from the Western pharmacopoeia in the 19th century, experiencing a crisis as an export product in the America in the 20th century, and eventually settling in the U.S. society and the military as a dietary supplement in the 21th century. In this process, the legislation of provided a bridgehead for ginseng and other botanical dietary supplements to enter the U.S. market. As a result, ginseng could be re-listed in the U.S. pharmacopoeia as a dietary supplement. However, this did not mean a complete soft landing of ginseng and other botanical dietary supplements in the America. The U.S. medical community, which has been afraid of the indiscriminate spread of botanical dietary supplements, has constantly raised "the risk-discourse" and expressed concerns over the use and abuse of botanical dietary supplements that have not been scientifically verified. This involved not only the fundamental problems caused by the lax verification process of , but also a new atmosphere in the U.S. where the public sought information about botanical dietary supplements rather than seeking professional clinicians related to their health. Against this situation, "the advocate-discourse" suggested by dietary supplement manufacturers and the people in charge of botanical products seemed rather relaxed. As consumers are taking this side, the advocates had only to stress that botanical dietary supplements have been used worldwide for a long time without any problems and were made from 'natural' materials. The fact that ginseng and other botanical dietary supplements were able to advance to the U.S. Military's dietary supplement manual, which is strict in controlling food, seems to have jumped on the bandwagon of this atmosphere in the U.S. Society. In the early U.S. dietary supplement manual reviewed in this paper, ginseng was the most detailed among many botanical dietary supplements. Although there are some 'safety concerns' that still exist in the civilian society, but there are also certainly good scientific explanations for the efficacy and references to the popularity and influence of ginseng in the American society. Given this, the U.S. society and military's interest in ginseng as a dietary supplement seem quite high.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.3
• /
• pp.149-155
• /
• 2021

Early warning systems for weather risk management in the agricultural sector have been developed to predict potential wind damage to crops. These systems take into account the daily maximum wind speed to determine the critical wind speed that causes fruit drops and provide the weather risk information to farmers. In an effort to increase the accuracy of wind risk predictions, an artificial neural network for binary classification was implemented. In the present study, the daily wind speed and other weather data, which were measured at weather stations at sites of interest in Jeollabuk-do and Jeollanam-do as well as Gyeongsangbuk- do and part of Gyeongsangnam- do provinces in 2019, were used for training the neural network. These weather stations include 210 synoptic and automated weather stations operated by the Korean Meteorological Administration (KMA). The wind speed data collected at the same locations between January 1 and December 12, 2020 were used to validate the neural network model. The data collected from December 13, 2020 to February 18, 2021 were used to evaluate the wind risk prediction performance before and after the use of the artificial neural network. The critical wind speed of damage risk was determined to be 11 m/s, which is the wind speed reported to cause fruit drops and damages. Furthermore, the maximum wind speeds were expressed using Weibull distribution probability density function for warning of wind damage. It was found that the accuracy of wind damage risk prediction was improved from 65.36% to 93.62% after re-classification using the artificial neural network. Nevertheless, the error rate also increased from 13.46% to 37.64%, as well. It is likely that the machine learning approach used in the present study would benefit case studies where no prediction by risk warning systems becomes a relatively serious issue.

• Tunnel and Underground Space
• /
• v.31 no.5
• /
• pp.374-384
• /
• 2021

In this study, we propose a new approach for automatic fracture detection in CT scan images of rock specimens. This approach is built on top of two-stage object detection deep learning algorithm called Faster R-CNN with a major modification of using rotated bounding box. The use of rotated bounding box plays a key role in the future work to overcome several inherent difficulties of fracture segmentation relating to the heterogeneity of uninterested background (i.e., minerals) and the variation in size and shape of fracture. Comparing to the commonly used bounding box (i.e., axis-align bounding box), rotated bounding box shows a greater adaptability to fit with the elongated shape of fracture, such that minimizing the ratio of background within the bounding box. Besides, an additional benefit of rotated bounding box is that it can provide relative information on the orientation and length of fracture without the further segmentation and measurement step. To validate the applicability of the proposed approach, we train and test our approach with a number of CT image sets of fractured granite specimens with highly heterogeneous background and other rocks such as sandstone and shale. The result demonstrates that our approach can lead to the encouraging results on fracture detection with the mean average precision (mAP) up to 0.89 and also outperform the conventional approach in terms of background-to-object ratio within the bounding box.