• The Korean Journal of Nuclear Medicine Technology
• /
• v.28 no.1
• /
• pp.57-69
• /
• 2024

Purpose: Quantitative analysis through count measurement in nuclear medicine planar images is limited by analysis techniques that are useful for obtaining various clinical information or by organ overlap or artifacts in actual clinical practice. On the other hand, the use of SPECT tomography images is quantitative analysis using volume rather than planar, which is not only free from problems such as projection overlap, but also has excellent quantitative accuracy. In the use of developing SPECT quantitative analysis technology, this study aims to compare the accuracy of quantitative analysis between ROI of the conventional planar images and VOI of the SPECT tomographic images in evaluating the count change happened by the volume change of the source. Materials and Methods: A ^99mTcO₄^- source(200.17 MBq) was filled with sterilized water in the syringe to create a phantom with an inner diameter volume of 60 cc, and a planar image and a SPECT image were obtained by reducing the volume by 15 cc (25%) respectively. ROI and VOI(threshold: 1~45%, 5% interval) were set for each image obtained to estimate true count and measure the total count, and compared with the preseted volumetric change rate(%). Results: When volume changes of 25%, 50%, and 75% occurred in the initial volume of 60 cc(100%) of the phantom, the average count changes of the measured planar image were 26.8%, 53.2%, 77.5%, and the average count changes of the SPECT image were 24.4%, 50.9%, and 76.8%. In this case, the VOI size(cm³) set showed an average change rate of 25.4%, 51.1%, and 76.6%. The highest threshold value for the accuracy of radioactive concentration by VOI size (average error -1.03%) was 35%, and the VOI size of the same threshold had an error of -17.1% on average compared to the actual volume. Conclusion: On average, the count-based volumetric change rate in nuclear medicine images was able to track changes more accurately using VOI than ROI, but there was no significant difference with relatively similar value. However, the accuracy of radioactive concentration according to individual VOI sizes did not match, but it is considered that a relatively accurate quantitative analysis can be expected when the size of VOI is set smaller than the actual volume.

• Health Policy and Management
• /
• v.34 no.2
• /
• pp.106-119
• /
• 2024

Drug shortage is a persistent phenomenon that poses a public health risk worldwide and occurs due to a range of causes. The purpose of this study is to review key policies to prepare for and respond to drug shortages in selected countries, such as the United States, Canada, and some European countries in order to draw implications. This study reviewed the reports and articles derived from search engines and Google Scholar by using keywords such as drug shortage and stock-out. Over the last decade or so, the United States have strengthened requirements on advance notification for disruption and interruption of drug manufacturing, established the Inter-agency Drug Shortages Task Force to promote the communication and coordination of responses, and expedited drug regulatory processes. Similarly, Canada established the Multi-Stakeholder Steering Committee on drug shortages by involving representatives from central and local governments and private sectors. Canada also adopted a tiered approach to the communication of drug shortages based on the assessment of the severity of the shortage problem and released a detailed information guide on communication. In 2019, the joint task force between the European Medicines Agency and the Heads of Medicines Agencies issued guidelines on drug shortage communication in the European Economic Area. The countries reviewed in this paper focus on communication across different stakeholders for the monitoring of and timely response to drug shortages. The efforts to protect public health from the negative impact of the drug shortage crisis would require multi-sectorial and multi-governmental coordination and development of guidelines.

• Journal of Ginseng Research
• /
• v.48 no.2
• /
• pp.149-162
• /
• 2024

Ginseng, the roots of Panax species, is an important medicinal herb used as a tonic. As ginsenosides are key bioactive components of ginseng, holistic chemical profiling of them has provided many insights into understanding ginseng. Mass spectrometry has been a major methodology for profiling, which has been applied to realize numerous goals in ginseng research, such as the discrimination of different species, geographical origins, and ages, and the monitoring of processing and biotransformation. This review summarizes the various applications of ginsenoside profiling in ginseng research over the last three decades that have contributed to expanding our understanding of ginseng. However, we also note that most of the studies overlooked a crucial factor that influences the levels of ginsenosides: genetic variation. To highlight the effects of genetic variation on the chemical contents, we present our results of untargeted and targeted ginsenoside profiling of different genotypes cultivated under identical conditions, in addition to data regarding genome-level genetic diversity. Additionally, we analyze the other limitations of previous studies, such as imperfect variable control, deficient metadata, and lack of additional effort to validate causation. We conclude that the values of ginsenoside profiling studies can be enhanced by overcoming such limitations, as well as by integrating with other -omics techniques.

• Journal of Korean Society of Archives and Records Management
• /
• v.24 no.2
• /
• pp.139-163
• /
• 2024

This study aims to analyze classification systems used in the public sector, collected based on legislation, and to improve the classification system for public records. From the Korean Law Information Center, 375 legislative clauses were searched, revealing about 80 classification systems. These systems were initially divided into lists, tables, and hierarchical classifications. Six types of classification system uses were proposed after combining three management types and two system functions. Among these models, classification systems used for core operations in public agencies often had the same entity as both developer and user. While systems adopted from other institutions were often modified as needed, they were predominantly used for reference tasks rather than core operations. However, in records management, crucial tasks such as record classification and disposal commonly use unmodified classification system items developed and managed by other agencies. Consequently, this study proposes that structural improvements are necessary for the record classification system. It suggests developing dedicated classification systems to support core functions or modifying existing systems and also applying records management disposal standards and guidelines to other relevant legislative provisions.

• Journal of Sensor Science and Technology
• /
• v.33 no.1
• /
• pp.40-47
• /
• 2024

The creation of vertically aligned one-dimensional (1D) nanostructures through the decoration of n-type tin oxide (SnO₂) on p-type chromium oxide (Cr₂O₃) constitutes an effective strategy for enhancing gas sensing performance. These heterostructures are deposited in multiple stages using a glancing angle deposition technique with an electron beam evaporator, resulting in a reduction in the surface porosity of the nanorods as SnO₂ is incorporated. In comparison to Cr₂O₃ films, the bare Cr₂O₃ nanorods exhibits a response 3.3 times greater to 50 ppm H₂S at 300℃, while the SnO₂-decorated Cr₂O₃ nanorods demonstrate an eleven-fold increase in response. Furthermore, when subjected to various gases (CH₄, H₂S, CO₂, H₂), a notable selectivity toward H₂S is observed. This study paves the way for the development of p-type semiconductor sensors with heightened selectivity and sensitivity towards H₂S, thus advancing the prospects of gas sensor technology.

• Knowledge Management Research
• /
• v.24 no.4
• /
• pp.131-152
• /
• 2023

One of the key domains within a smart tourism city, smart mobility, encompasses advanced transportation means and services rooted in Information and Communication Technology (ICT). This includes shared bicycles, scooters, car-sharing services, smart transportation infrastructure, and more, aiming to surpass limitations of conventional transport and improve the movement of people and goods. It also serves tourists as an affordable and convenient mode of transport between attractions while also enhancing the overall travel experience. This study has defined 'smart tourism mobility' as a form of mobility grounded in ICT, exhibiting exceptional connectivity, serving public interest, and serving as a mode of transport for both residents and tourists in a smart tourism city. The research aimed to outline the scope of smart tourism mobility-related industries through expert Delphi surveys and estimate their economic effects within a smart tourism city. Specifically, this study updated 2015 input-output table and made 2020 regional input-output table of Seoul adopting RAS method and location quotient method. The results showed that the about 2.8 billion KRW investment of Seoul in smart tourism mobility may create more than 4.1 billion KRW in production inducement effect which is expected to create more than 1.6 billion KRW of income-inducing effect, 3.6 billion KRW of value-added-inducing effect, and 54 employment across all industries in Seoul in 2022.

• Korean Journal of Environment and Ecology
• /
• v.38 no.2
• /
• pp.178-188
• /
• 2024

The dynamics of suspended sediment (SS) in forested catchments vary depending upon human or natural disturbances, including land use change, forestry activity, forest fires, and landslides. Understanding the dynamics of SS originating from the potential sources within a forested catchment is crucial for establishing an effective water quality management strategy. Therefore, to suggest a systematic method for interpreting SS dynamics, we evaluated the performance and applicability of ten methods for calculating the hysteresis index based on observed hydrological data and two calculation models (Lawler's method and Lloyd's method) with five sampling intervals (50th, 25th, 10th, 5th, and 1st percentiles). Our results showed that Lloyd's method, which used a sampling interval at the 1st percentile, had the largest number of analyzable runoff events and exhibited the best performance. The results of this study can contribute to quantifying the hysteresis in the relationship between discharge and SS and provide useful information for interpreting SS dynamics.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.3
• /
• pp.173-178
• /
• 2024

This study presents a technique for assessing the dimensional quality of assembly parts in Prefabricated Steel Structures (PSS) using a stereo vision sensor. The stereo vision system captures images and point cloud data of the assembly area, followed by applying image processing algorithms such as fuzzy-based edge detection and Hough transform-based circular bolt hole detection to identify bolt hole locations. The 3D center positions of each bolt hole are determined by correlating 3D real-world position information from depth images with the extracted bolt hole positions. Principal Component Analysis (PCA) is then employed to calculate coordinate axes for precise measurement of distances between bolt holes, even when the sensor and structure orientations differ. Bolt holes are sorted based on their 2D positions, and the distances between sorted bolt holes are calculated to assess the assembly part's dimensional quality. Comparison with actual drawing data confirms measurement accuracy with an absolute error of 1mm and a relative error within 4% based on median criteria.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.37 no.1
• /
• pp.89-103
• /
• 2024

Objectives: This study analyzed an online survey targeting women and Korean medicine doctors who participated in the Yeosu City Postpartum Health Center Support Project. Through this, we would like to discuss the direction of support for postpartum health care support projects and new policies to encourage childbirth. Methods: In this study, we examined the results of an online survey from 73 women and 29 Korean medicine doctors. We examined 39 items, including basic information, childbirth-related items, Korean medicine treatment-related items, business satisfaction, and policies, answered by 73 women and 29 Korean medicine doctors who responded to the online survey. Results: The average age of women was 33.62±4.19 years, and the average age of Korean medicine doctors was 49.82±8.60 years. Musculoskeletal pain appeared most commonly in both maternal and Korean medicine doctors' online surveys. The visit date from the date of delivery was 36.87±27.06 days. Gungguijohyeol-um and Boheo-tang were widely used. The survey score of women whose main symptoms improved after taking herbal medicine was 3.04±1.15 points, and the survey score of Korean medical doctors was 4.13±0.74 points. The positive response to the policy was 73.7% for satisfaction with the overall policy to encourage childbirth, 54.8% for perceived support, and 65.7% for reduction of economic burden. Conclusions: Women who participated in the postpartum health care support project and received Korean medicine treatment and Korean medicine doctors who performed Korean medicine treatment were very satisfied. The most frequent postpartum symptom was musculoskeletal pain. The degree of improvement in main symptoms after taking herbal medicine was higher among Korean medicine doctors than among women. Among childbirth policies, the areas that should be prioritized are childbirth support projects and postpartum care projects.

• Journal of the Korean Society of Radiology
• /
• v.81 no.3
• /
• pp.591-603
• /
• 2020

Purpose The purpose of this study was to describe the clinical features and chest computed tomography (CT) findings of coronavirus disease 2019 (COVID-19) pneumonia. Materials and Methods An Institutional Review Board-approved retrospective review was performed for 51 laboratory-confirmed COVID-19 pneumonia patients. Patients were divided into two groups depending on their clinical status: mild and severe. Clinical characteristics and chest CT findings were compared between the two groups. Results Among the 51 patients (22 men, 29 women; mean age, 56.5 ± 16 years; range, 22-88 years), 37 (72.5%) were in the mild group and 14 (27.5%) were in the severe group. The patients in the severe group (68.7 ± 12.5 years) were older than the patients in the mild group (51.8 ± 14.9 years, p < 0.001). Premorbid conditions and decreased lymphocyte counts were more often observed in the severe group than in the mild group (71% vs. 41%, p = 0.049 and 86% vs. 32%, p = 0.001, respectively). On chest CT, most patients exhibited a mixed ground-glass opacification (GGO) with consolidation (76%) or a GGO (22%) pattern. The majority of lesions were predominantly bilateral in the lower lung with a posterior, peripheral distribution. The patients in the severe group had higher severity scores than those in the mild group. Conclusion Patients with laboratory-confirmed COVID-19 pneumonia have typical chest CT findings that provide important information regarding expected disease severity.