• Korean Journal of Construction Engineering and Management
• /
• v.9 no.6
• /
• pp.185-193
• /
• 2008

As buildings become higher and larger, the possibility of accident also increases, and recurrent accidents and serious accidents are also increasing. However, it is not possible to control all the hazardous activities in construction site. Therefore, hazardous activities with higher possibility should be identified and prioritized in advance so engineers and managers can control the activities in safe manner. For this purpose, this research adopts FMEA technique, which has been widely utilized in manufacturing industry. In order to apply FMEA technique in construction safety management, the process of construction work is divided into sub-processes or activities. Then FMEA technique is applied to quantitatively analyze the importance of each activity from the safety perspective.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.2
• /
• pp.134-139
• /
• 2013

When the accident occurred in power distribution system, it needs to control efficiently the fault current according to the fault angle and location. The flux-lock type superconducting fault current limiters (SFCL) can quickly limit when the short circuit accidents occurred and be made the resistance after the fault current. The flux-lock type SFCL has a single triggering element, detects and limits the fault current at the same time regardless of the size of the fault current. However, it has a disadvantage that broken the superconductor element. If the flux-lock type SFCL has separated structure of the triggering element and the limiting element, when large fault current occurs, it can reduce the burden of power and control fault current to adjust impedance. In this paper, this system is composed by triggering element and limiting element to analyze operation of limiting current. When the fault current occurs, we analyzed the limiting and operating current characteristics of the two triggering current level, and the compensation characteristics of bus-voltage sag according to the fault angle and location.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.1
• /
• pp.105-110
• /
• 2011

Embezzlement incident of staff at the casino occurred. Staff of some casinos have lower job satisfaction, moral gap is seriously considering a change jobs. In addition, cash lure of large amounts and a lack of money management system causes embezzlement incident. In this paper, the uniqueness of the casino industry and that employee job satisfaction is investigated. Content analysis of occurrence for casino embezzlement incident and tracking that bank account and bank check, suspect's call list, and so on that digital forensic investigation technology will be studied. Problems and solutions suggest that conducted a loss prevention program, a digital forensics technology and introduce of investigator. Through this study, the computerization of the casino business to embezzlement accident prevent will contribute to that give back profits of property to society, the develop of forensic investigation technology.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.5 s.248
• /
• pp.481-487
• /
• 2006

Spot-welding is a widely used manufacturing method for thin-sheet components, especially in mass-production industries such as the car industry. Automobiles are often constructed by multi-lap spot welding to secure the passenger from the accident, where optimisation of the welding conditions is a major economic consideration. This research is conducted to investigate weldability characteristics with various welding conditions on the 4-lap spot welded joint of structural steel sheets in automobile. The relationship between the tensile-shear strength and the indentation depth has been investigated to propose the optimum welding conditions. The welding current and the welding time have a greater effect on the welding characteristics than the electrode force. It was found that the electrode force has a relatively close relationship with the expulsion occurrence. The design curves for optimum welding are proposed for the 4-lap spot welded joint.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.6
• /
• pp.730-737
• /
• 2019

The purpose of this study was to derive practical improvement measures for the food traceability system that could improve food reliability and secure food safety. To this, in our survey May-June, 2019, 567 adult males and females were analyzed for recognition and experience of the food traceability system, measures to improve the system, and intention to make additional payments to improve the system. In the case of a food safety accident, 2.54 of 5 points were given on if the food was recalled or not. Approximately 77.4 percent of the respondents had never seen indication of a food traceability system, and approximately 93.8 percent had no access to, or experience with, using the system. Most respondents said that the food traceability system should be applied to items that need to be applied. As the volume of data that is recorded and managed by the government is recognized as high, improvement is needed. Finally, it was analyzed that the company intends to pay an additional 1.34% on average to expand its food traceability system. A more sophisticated cost analysis is needed to apply the improvements proposed to complement the plans that are acceptable to consumers and the industry.

• Korean Journal of Plant Resources
• /
• v.24 no.3
• /
• pp.330-336
• /
• 2011

The recent disaster of earthquake and tsunami on March 11, 2011 severely attacked East Japanese cities and people, and in addition, the accident of nuclear power station will inevitably damage the agricultural activities there. The economical depression influences on the horticulture and floriculture industry as well, through the reluctant consumption all over the country. Such a situation reflects a conventional perception that the garden plants or ornamental plants have been regarded as a symbol of capitalism, representing the success, luxury, beauty or other metaphors indicating the winners of business war. But as the word "culture" means "cultivation" originally, horti "culture" or flori "culture" should have played some roles in cultivating lands as well as cultivation of human minds, leading to develop a modern "culture" which may lay emphases on personality, originality, partnership, cooperation, diversity and so forth. In this article, a brief history of garden plants in Japan, as well as some current movements in Japanese horticulture and floriculture, is reviewed with some commodities which possess messages on creating a new humane culture.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1752-1757
• /
• 2012

With the development in industry, power demand has increased rapidly. As consumption of power has increased, Demand for new power line and electric capacity has risen. However, in the event of fault, problems occur in extending the range of fault coverage and increasing fault current. In these reasons, protection devise is recognized as the prevention of an accident and fault current. This paper dealt with minimizing fault propagation and limiting fault current by adjusting fault current limiter (FCL) with fast interrupter. At this point, we compared and analyzed characteristics between non-inductive resistance and fault current which is limited by superconducting units. In normal state of the power system, power was supplied to the load, but when fault occurred, the interrupter was operated as CT which detected the over-current. Its operation made the limitation of fault current through a FCL. We concluded that the limiter using superconducting units was more efficient with the increase of power voltage. Superconducting fault current limiter with the fast interrupter prevented the spread of a fault, and improved reliability of power system.

• International Journal of Safety
• /
• v.9 no.1
• /
• pp.30-34
• /
• 2010

A big difference is seen in the perception of self-responsibility concerning safety, as a result of my survey on the safety measures taken in the pipeline construction at workers level between Japan and Indonesia. Specifically, when an accident occurs, a worker in Indonesia will think that the responsibility depends on the person who causes it. However a worker in Japan will think that safety is can only be protected by law and regulations. There is also another difference in the understanding of construction period. It is alright in Indonesia to take 5 times longer period than it takes in Japan if the cost is less. The idea of punctual delivery is very strong in Japan. Through this survey, points which construction industry in Japan could learn from Indonesia came to surface. In addition, over the recent years, several nasty accidents at Japanese sites were caused due to human error to disregard the law. Japanese should arouse the awareness of self-responsibility in this regard. Risk management should be upon self-recognition of each individual worker in both countries. What is important is the "work attitude education", "to grow sense of self-responsibility by thinking on one's own for one's self" in the education curriculum of man to man learning as in technical educational program.

• Structural Engineering and Mechanics
• /
• v.60 no.2
• /
• pp.337-350
• /
• 2016

Even though extensive researches have been performed for steam explosion due to their complex mechanisms and inherent uncertainties, establishment of severe accident management guidelines and strategies is one of state-of-the arts in nuclear industry. The goal of this research is primarily to examine effects of vessel failure modes and locations on nuclear facilities under typical steam explosion conditions. Both discrete and integrated models were employed from the viewpoint of structural integrity assessment of steel components and evaluation of the cracking and crushing in reinforced concrete structures. Thereafter, comparison of systematic analysis results was performed; despite the vessel failure modes were dominant, resulting maximum stresses at the all steel components were sufficiently lower than the corresponding yield strengths. Two failure criteria for the reinforced concrete structures such as the limiting failure ratio of concrete and the limiting strains for rebar and liner plate were satisfied under steam explosion conditions. Moreover, stresses of steel components and reinforced concrete structures were reduced with maximum difference of 12% when the integrated model was adopted comparing to those of discrete models.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2455-2462
• /
• 2008

Global warming has become one of the most important social responsibilities. After Kyoto protocol for greenhouse gas reduction by climatic change convention came into effect, developed countries are presenting various policies to reduce greenhouse gas that is produced in transport field. One of those policies is modal shift that change from road freight to sea, inland waterway and railway transportation that is eco-friendly. Because increase of road freight brings about road congestion and accident, logistics cost, air pollution and green house gases. Railways are superior to all other modes of transport in mass transportability, high speed, timeliness, safety and environmental-friendliness, but the railway industry has been pushed behind in competition. In developed country's government actively promoted relevant legislation, policies, and countermeasures known as modal shift policies to shift freight transport from road to large volume mode such as railway and ship. In this paper, we discuss the current situation in modal shift, compare it with cases in other countries EU and Japan, identify problems in Korea, and propose the following ways to enhance competitiveness of rail freight.