• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제62권3호
• /
• pp.349-354
• /
• 2013

Wireless power transmission introduced by Tesla has instrumented by many scientists of the world. This technique first was utilized as wireless communications such as radio in long range transmission. And contactless transmission using inductive property was used on white goods. In 2007, MIT' lab introduced that new wireless power transmission by magnetic resonance which has about 50% efficiency and 2M transmission distances, it was a chance to refocus a new possibility of wireless power transmission. In this paper, using LC coupling compensate the short distances of contactless transmission, this simple method could transmit about 30cm distances. Using this approach, it can be solved the short transmission distances, a drawback of Electromagnetic inductive coupling method.

• Journal of IKEEE
• /
• 제23권1호
• /
• pp.306-309
• /
• 2019

Wireless charging is a technology of transmitting power through an air gap to an electrical load for the purpose of energy dissemination. Compared to traditional charging with code, wireless power charging has many benefits of avoiding the hassle from connecting cables, rendering the design and fabrication of much smaller devices without the attachment of batteries, providing flexibility for devices, and enhancing energy efficiency, etc. A transmitting coil and a receiving coil for inductive coupling or magnetic resonant coupling methods are available for the near field techniques, but are not for the far field one. In this paper, the wireless power transfer (WPT) circuit by using magnetic resonant coupling method with a resonant frequency of 13.45 Mhz for the low power system is implemented to measure the power transmission efficiency in terms of mutual distance and omnidirectional angles of receiver.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.71-74
• /
• 2003

Fall-of-potential method is used usually to measure the ground impedance of large scale grounding system exactly. Because the interlinked magnetic flux between closed loops to inject test current and to measure potential rise is existed in E-P-C straight line arrangement, mutual(or inductive) coupling influences greatly on the measurement correctness. Measurement errors produced from inductive coupling could be reduced by the arrangement methods of auxiliary electrodes. Right angle or P-E-C order arrangement methods were effective to reduce the inductive coupling and the decrease degree of measurement error was analysed as quantitative through an experiment.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1502-1503
• /
• 2007

In this paper, inductive coupled LC balun has been desi gned and simulated for embedding into an organic packaging substrate. Inductive coupling method was applied to obtain wide band characteristics, and high dielectric film was utilized to reduce a size of the balun. The proposed balun has a novel scheme which consists of three embedded LC resonators with inductive coupling. This proposed balun has relatively small inductance and capacitance values which can be easily embedded into the organic packaging substrate. Furthermore, it has a good phase imbalance characteristic. The simulated results of proposed balun are an insertion loss of 1.2 dB, a return loss of 10 dB, a phase imbalance of 1 degree at frequency bandwidth of 750 MHz ranged from 1.8 GHz to 2.55 GHz, respectively. This balun has an area of $2mm{\tims}3.5mm{\times}0.66mm$ (height).

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1211-1218
• /
• 2017

In this paper, performance of rectangular shaped magnetic power pads for inductive power transfer (IPT) system according to ferrite structure is analyzed. In order to evaluate the influences of ferrite structure, six cases of magnetic power pads are proposed. Self-inductance, coupling coefficient, quality factor, and coil to coil efficiency are compared as the displacement increases in the direction of x or y axis. For accurate estimation, finite element method (FEM) simulation is used and loss components of the power pads are numerically calculated and considered. Through the simulation and measured results, effectiveness of protrusive and enveloping ferrite structure is identified.

• Journal of the Korea Convergence Society
• /
• 제6권2호
• /
• pp.57-64
• /
• 2015

Inductive Power Transfer (IPT) systems have successfully been developed and used to replace traditional conductive power transfer systems where physical connection is either inconvenient or impossible, such as biomedical implants, undersea vehicles, and contactless battery chargers of robots, for providing power to movable or detachable loads. Inductive Coupling uses magnetic fields to transfer power. There is a primary coil, which generates a magnetic field. Then there is another secondary coil which is composed of a capacitor and a coil, the capacitor creates a circuit with the primary and secondary coils. This paper discusses design method and several implementation alternatives for wireless energy transmission systems. It presents realization examples for these alternatives. Wireless energy transmission is investigated in numerous convergence applications due to its simplicity and advantages.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 한국퍼지및지능시스템학회 2007년도 춘계학술대회 학술발표 논문집 제17권 제1호
• /
• pp.435-439
• /
• 2007

This paper deals with RLS algorithm using Newton-Raphson method based adaptive forgetting factor for a passive telemetry RF sensor system in order to estimate the time variant parameter to be included in RF sensor model. For this estimation with RLS algorithm, phasor typed RF sensor system modelled with inductive coupling principle is used. Instead of applying constant forgetting factor to estimate time variant parameter, the adaptive forgetting factor based on Newton-Raphson method is applied to RLS algorithm without constant forgetting factor to be determined intuitively. Finally, we provide numerical examples to evaluate the feasibility and generality of the proposed method in this paper.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권2호
• /
• pp.227-234
• /
• 2014

A transceiver for a high-speed inductive-coupling link is proposed. The bi-phase modulation (BPM) signaling scheme is used due to its good noise immunity. The transmitter utilizes a complementary switching method to remove glitches in transmitted data. To increase the timing margin on the receiver side, an integrating receiver with a pre-charging equalizer is employed. The proposed transceiver was implemented via a 130-nm CMOS process. The measured timing window for a $10^{-12}$ bit error rate (BER) at 1.8 Gb/s was 0.33 UI.

• Journal of the Korean Magnetics Society
• /
• 제22권3호
• /
• pp.97-102
• /
• 2012

In this paper, a non-contact power transferring has been performed. Power Transferring by using an electromagnetic inductive coupling is more suitable for high power transmission than by using a magnetic resonance method. Power transferring system has been designed with Loading Distribution Method to divide the electric and magnetic loading for designing the magnetic core and electric coil. To design optimum shapes of magnetic yoke, 3D finite element analysis has been performed. Experimental results show good agreement with numerical ones. So, it could be adopted in the electric power transferring system for a short-distance wireless electric power transferring machine.

• Journal of IKEEE
• /
• 제23권2호
• /
• pp.747-750
• /
• 2019

Wearable devices have become practically indispensable to daily life and helped people track and manage fitness, health, and medical functions etc. As these wearable devices become smaller and more comfortable for the user, the demand for longer run time and charging ways presents new challenges for the power management engineer. Wireless power transfer (WPT) is the technology that forces the power to transmit electromagnetic field to an electrical load through an air gap without interconnecting wires. This technology is widely used for the applications from low power smart phone to high power electric railroad and main electrical grid. There are two kinds of WPT methods: Inductive coupling and magnetic resonant coupling. The model using magnetic resonant coupling method is designed for a resonant frequency of 13.45 MHz. In this study, the hardware implementations of these two coupling methods are carried out, and the efficiencies are compared.