• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.467-470
• /
• 2007

Ultrafine Indium tin oxide (ITO) nanoparticle was successfully fabricated by low temperature synthetic method (LTSM). Mean size of ITO nanoparticle is 5 nm, and uniformly dispersed with (222) orientated cubic structure. Using the nanoparticle, ITO thin film with good optical and electrical properties was fabricated by inkjet printing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.81-83
• /
• 2000

Tin-doped indium oxide(ITO) thin films were deposited on polyethylene terephthalate(PET) at room temperature by oxygen ion beam assisted evaporator system and the effects of oxygen gas flow rate on the properties of room temperature ITO thin films were investigated. Plasma characteristics of the ion gun such as oxygen ions and atomic oxygen radicals as a function of oxygen flow rate were investigated using optical emission spectroscopy(OES). Faraday cup also used to measure oxygen ion density. The increase of oxygen flow rate to the ion gun generally increase the optical transmittance of the deposited ITO up to 6sccm of $O_2$ and the further increase of oxygen flow rate appears to saturate the optical transmittance. In the case of electrical property, the resistivity showed a minimum at 6 sccm of $O_2$ with the increase of oxygen flow rate. Therefore, the improved ITO properties at 6 sccm of $O_2$ appear to be more related to the incorporation of low energy oxygen radicals to deposited ITO film rather than the irradiation of high energy oxygen ions to the substrate. At an optimal deposition condition, ITO thin films deposited on PET substrates showed the resistivity of $6.6{\times}10^{-4}$ ${\Omega}$ cm and optical transmittance of above 90%.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.142.1-142.1
• /
• 2018

This research presents a new field effect transistor (FET) by using liquid crystal gate dielectric with remote gate. The fabrication of thin-film transistors (TFTs) was used Indium tin oxide (ITO) for the source, drain, and gate electrodes, and indium gallium zinc oxide (IGZO) for the active semiconductor layer. 5CB liquid crystal was used for the gate dielectric material, and the remote gate and active layer were covered with the liquid crystal. The output and transfer characteristics of the LC-gated TFTs were investigated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.352-353
• /
• 2005

Indium tin oxide (ITO) thin film was polished by chemical mechanical polishing (CMP) immediately after pad conditioning with the various conditioning temperatures by control of do-ionized water (DIW). Light transparent efficiency of ITO thin film was improved after CMP process after pad conditioning at the high temperature because the surface morphology was smoother by soften polishing pad and decreased particle size.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.35-38
• /
• 1995

Indium Tin Oxide(ITO) thin film is transparent to visible ray and conductive in electricity. It is seen that the samples made by the sputtering process have high transmission rate to visible ray and high adhesion , but the planar type magnetron sputtering process with is very well known in industrial region have a defect of partial erosion on the surface of target and a high loss of target and also since the substrate is positioned in plasma, the damage on thin film surface is caused by the reaction with plasma. In cylindrical magnetron sputtering system. it is known that the loss of target is little , the damage of thin film is very little and the adhesion of thin film with substrate is strong. In this study, we have made ITO thin film in the cylindrical DC magnetron system with the variable of substrate temperature , magnetic field, vacuum condution and the applied voltage. The general temperature for formation on ITO is asked at 350 $^{\circ}C$~400$^{\circ}C$ but we have made ITO is low temperature(80-150$^{\circ}C$) By studing electrical and optical properties of ITO thin fims made by varing several condition, we have searched the optimal condition for formation in the best ITO in low temperature.

• Journal of Surface Science and Engineering
• /
• v.38 no.4
• /
• pp.150-155
• /
• 2005

Highly conductive and transparent in the visible region tin-doped indium oxide(ITO) thin films were deposited on Corning glass by r.f sputtering. To achieve high transmittance and low resistivity, we examined various parameters such as r.f power and deposition time. The films crystallinity shifted from (222) to (400) and (440) orientation as deposition time and r.f power increased. Surface roughness RMS value increased proportionally with deposition time. The lowest resistivity was $5.36{\times}10^{-4}{\Omega}{\cdot}cm$ at 750 nm thickness, $200^{\circ}C$ substrate temperature and 125 w r.f power. All of the films showed over $85\%$ transmittance in the visible wavelength range.

• Journal of Surface Science and Engineering
• /
• v.38 no.2
• /
• pp.55-59
• /
• 2005

ITO/Ni/ITO thin films were deposited on the PET by RF magnetron sputtering. Dependance of the process parameters such as deposition pressure, positions of Ni layer, on the transmittance, reflectance and sheet resistance of ITO/Ni/ITO film were investigated. When the Ni layer is placed at the center of ITO and deposition pressure is low, ITO/Ni/ITO films showed better optical and electrical properties. At these conditions, the transmittance, reflectance and sheet resistance of the ITO film were $90\%,\;0.38\%$ and $185\Omega/\Box$ respectively.

• Journal of Surface Science and Engineering
• /
• v.37 no.3
• /
• pp.158-163
• /
• 2004

ITO thin film was deposited on the glass by RF magnetron sputtering. Dependance of the process parameters such as thickness, target-to-substrate distance, substrate temperature and oxygen partial pressure on the transmittance and electrical resistance of ITO film were investigated. The deposition conditions for getting better optical and electrical ITO characteristics were the 1800-$2300\AA$ thickness, 65mm substrate-to-target distance, $350^{\circ}C$ substrate temperature and 8% oxygen partial pressure. At these conditions, the transmittance and sheet resistance of the ITO film were 83.3% and 77.86Ω/$\square$, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.370-370
• /
• 2008

ITO 박막은 현재 차세대 디스플레이인 LCD, PDP, ELD 등의 평판 디스플레이의 화소전극 및 공통전극으로 가장 많이 적용되고 있는 소재이며, 최근에는 태양전지의 투명전극으로 그 용도가 더욱 증가되고 있다. 이러한 소자들의 투명 전도막으로 사용되기 위해서는 가시광선 영역에서 80% 이상의 높은 투과도와 낮은 면 저항을 가져야 한다. 광 투과도와 면 저항은 ITO 박막의 증착조건에 따라 변하게 되는데 본 연구에서는 DC 마그네트론 스퍼터링법을 이용하여 Indium-Tin Oxide (ITO) 박막을 제작하고, 제작된 ITO 박막의 전기적 특성과 광학적 특성을 측정하여 공정조건에 따른 박막의 특성 변화를 평가하였다. 증착 조건은 주로 기판 온도와 증착 시간을 변화시켰다. 본 실험에서는 $In_2O_3$ : $SnO_2$의 조성비가 9:1 비율의 순도 99.99% ITO 타겟을 사용하였으며, coming 1737 glass를 30$\times$30 mm 크기로 가공하여 기판온도와 증착시간을 변화시키면서 ITO 박막을 제조하였다. 예비실험을 통해 인가전력 50W, 초기 진공 $2\times10^{-6}$ Torr, 작업 진공 $3.5\times10^{-2}$ Torr, 기판과 타겟 사이의 거리를 10 cm로 고정하였다. 기판 온도는 히터를 가열하지 않은 상온 ($25^{\circ}C$)에서 $400^{\circ}C$까지의 범위에서 변화시켰고, 증착시간은 5분에서 30분까지의 범위에서 변화시켰다. 증착된 박막의 면 저항 촉정을 위해 4 point probe를 사용하였고, 홀 (hall) 계수 측정기 (HMS-300)를 이용하여 홀 계수를 측정하였으며, 또한 박막의 두께는 $\alpha$-step을 사용하여 측정하였다. ITO 박막의 상분석을 위해 XRD를 사용 하였고, SEM을 이용하여 미세구조를 관찰하였다. 실험 결과로는 기판온도 $400^{\circ}C$, 증착시간 15분 이상에서는 면 저항이 모두 $8\Omega$/$\Box$이하로 낮게 나왔으며, 투과율 또한 모두 80% 이상의 높은 투과도를 보였다. 또한 ITO박막의 전기 전도도는 캐리어 농도와 이동도의 측정을 통해 두 가지 인자들에 의해 비례되는 것을 확인하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.352.1-352.1
• /
• 2014

Indium Tin Oxide (ITO) films are the most extensively studied and commonly used as ones of TCO films. The ITO films having a high electric conductivity and high transparency are easily fabricated on glass substrate at a substrate temperature over $250^{\circ}C$. However, glass substrates are somewhat heavy and brittle, whereas plastic substrates are lightweight, unbreakable, and so on. For these reasons, it has been recently suggested to use plastic substrates for flexible display application instead of glass. Many reaearchers have tried to produce high quality thin films at rood temperatures by using several methods. Therefore, amorphous ITO films excluding thermal process exhibit a decrease in electrical conductivity and optical transparency with time and a very poor chemical stability. However the amorphous Indium Gallium Zinc Oxide (IGZO) offers several advantages. For typical instance, unlike either crystalline or amorphous ITO, same and higher than a-IGZO resistivity is found when no reactive oxygen is added to the sputter chamber, this greatly simplifies the deposition. We reported on the characteristics of a-IGZO thin films were fabricated by RF-magnetron sputtering method on the PEN substrate at room temperature using 3inch sputtering targets different rate of Zn. The homogeneous and stable targets were prepared by calcine and sintering process. Furthermore, two types of IGZO TFT design, a- IGZO source/drain material in TFT and the other a- ITO source/drain material, have been fabricated for comparison with each other. The experimental results reveal that the a- IGZO source/drain electrode in IGZO TFT is shown to be superior TFT performances, compared with a- ITO source/drain electrode in IGZO TFT.