• Journal of the Korean Society of Safety
• /
• v.9 no.4
• /
• pp.42-48
• /
• 1994

A rotor flux error-based approach for correcting the rotor time constant estimation used in the slip frequency calculator of indirect field oriented controller is presented in this paper. The controller was derived from the d-q induction machine model. Slip frequency gain is dependent on the machine parameter errors. And parameter errors result in rotor flux error. Thus, estimated rotor flux is compared to commanded rotor flux. The error between them is used for the estimation of rotor time constant. Simulation results which demonstrate the performance of this approach are presented.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.73-75
• /
• 1987

The paper proposes a class of discrete-time adaptive controller which may be applicable without sufficient a priori information. Against choices of the Information, GPC algorithm may seem to be more robust than any other methods reported, but it is the method based on Indirect approach. It is, therefore, reasonable to propose an algorithm via the zero-gain prediction, in which the control parameters are directly estimated and calculated.

• Archives of Craniofacial Surgery
• /
• v.19 no.2
• /
• pp.102-107
• /
• 2018

Background: Nasal fracture and orbital blowout fracture often occur concurrently in cases of midface blunt trauma. Generally, these multiple fractures treatment is surgery, and typically, the nasal bone and orbit are operated on separately. However, we have found that utilizing a transconjunctival approach in patients with concurrent nasal bone fracture and orbital blowout fracture is a useful method. Methods: The participants in the present study included 33 patients who visited the Plastic Surgery outpatient department between March 2014 and March 2017 and underwent surgery for nasal fracture and orbital blowout fracture. We assessed patients' and doctors' satisfaction with surgical outcomes after indirect open reduction via a transconjunctival approach for the treatment of nasal bone fracture with associated orbital blowout fracture. Results: According to the satisfaction scores, both patients and doctors were satisfied with transconjunctival approach. Conclusion: We presented here that our method enables simultaneous operation of nasal fracture accompanied by orbital blowout fracture, rather than treating the two fractures separately, and it allows precise reduction of the nasal fracture by direct visualization of the fracture site without any additional incisions or difficult surgical techniques. Also, by preventing the use of excessive force during reduction, this method can minimize damage to the nasal mucosa, thereby reducing the incidence of nasal bleeding.

• Journal of Mechanical Science and Technology
• /
• v.16 no.8
• /
• pp.1053-1063
• /
• 2002

This paper presents a robust nonlinear controller for a f degree of freedom (DOF) parallel manipulator in the task space coordinates. The proposed control strategy requires information on orientations and translations in the task space unlike the joint space or link space control scheme. Although a 6 DOF sensor may provide such information in a straightforward manner, its cost calls for a more economical alternative. A novel indirect method based on the readily available length information engages as a potential candidate to replace a 6 DOF sensor. The indirect approach generates the necessary information by solving the forward kinematics and subsequently applying alpha-beta-gamma tracker With the 6 DOF signals available, a robust nonlinear task space control (RNTC) scheme is proposed based on the Lyapunov redesign method, whose stability is rigorously proved. The performance of the proposed RNTC with the new estimation scheme is evaluated via experiments. First, the results of the estimator are compared with the rate-gyro signals, which indicates excellent agreement. Then, the RNTC with on-line estimated 6 DOF data is shown to achieve excellent control performance to sinusoidal inputs, which is superior to those of a commonly used proportional-plus-integral-plus-derivative controller with a feedforward friction compensation under joint space coordinates and the nonlinear controller under task space coordinates.

• Industrial Engineering and Management Systems
• /
• v.14 no.1
• /
• pp.58-72
• /
• 2015

A primary concern of national R&D plans is to encourage technological development in private firms and research institutes. For effective R&D planning and program support, it is necessary to assess technological impacts that may exist both directly and indirectly among technology areas within the whole technology system; however, previous studies analyze only direct impacts among technologies, failing to capture both direct and indirect impacts. Therefore, this study proposes an approach based on decision-making trial and evaluation laboratory (DEMATEL) to identifying specific characteristics of technology areas, such as technological impact and degree of cause or effect (DCE). The method employs patent co-classification analysis to construct a technological knowledge flow matrix. Next, to capture both direct and indirect effects among technology areas, it incorporates the modified DEMATEL process into patent analysis. The method helps analysts assess the technological impact and DCE of technology areas, and observe their evolving trajectories over time, thereby identifying relevant technological implications. This study presents a case study using Korean patents registered during 2003-2012. We expect our analysis results to be helpful input for R&D planning, as well as the suggested approach to be incorporated into processes for formulating national R&D plans.

• Computational Structural Engineering : An International Journal
• /
• v.1 no.1
• /
• pp.59-69
• /
• 2001

This study is intended to propose a systematic approach for reliability-based assessment of life cycle cost (LCC) effectiveness and economic efficiency for cost-effective seismic upgrading of existing bridges. The LCC function is expressed as the sum of the upgrading cost and all the discounted life cycle damage costs, which is formulated as a function of the Park-Ang damage index and structural damage probability. The damage costs are expressed in terms of direct damage costs such as repair/replacement costs, human losses and property damage costs, and indirect damage costs such as road user costs and indirect regional economic losses. For dealing with a variety of uncertainties associated with earthquake loads and capacities, a simulation-based reliability approach is used. The SMART-DRAIN-2DX, which is a modified version of the well-known DRAIN-2DX, is extended by incor-porating LCC analysis based on the LCC function developed in the study. Economic efficiencies for optimal seismic upgradings of the continuous PC segmental bridges are assessed using the proposed LCC functions and benefit-cost ratio.

• The Journal of Engineering Geology
• /
• v.24 no.4
• /
• pp.455-461
• /
• 2014

The Honam-Jeju, Korea-Japan, and Korea-China subsea tunnel construction projects have drawn significant attention since the early 2000s. These subsea tunnels are much deeper than most existing natural shallow sea tunnels linking coastal areas. Thus, the need for developing new technologies for the site selection and construction of deep subsea tunnels has recently emerged, with the launch of a research project titled "Development of Key Subsea Tunnelling Technology" in 2013. A component of this research, an analysis of deep subsea geological structure, is currently underway. A ground investigation, such as a borehole or geophysical investigation, is generally carried out for tunnel design. However, when investigating a potential site for a deep subsea tunnel, borehole drilling requires equipment at the scale of offshore oil drilling. The huge cost of such an undertaking has raised the urgent need for methods to indirectly assess the local geological structure as much as possible to limit the need for repeated borehole investigations. This study introduces an indirect approach for assessing the geological structure of the seafloor through a submarine bathymetry analysis. The ultimate goal here is to develop an automated approach to the analysis of submarine geological structures, which may prove useful in the selection of future deep subsea tunnel sites.

• Smart Structures and Systems
• /
• v.32 no.1
• /
• pp.37-47
• /
• 2023

Indirect determination of pan evaporation (PE) has been highly regarded, due to the advantages of intelligent models employed for this objective. This work pursues improving the reliability of a popular intelligent model, namely multi-layer perceptron (MLP) through surmounting its computational knots. Available climatic data of Fresno weather station (California, USA) is used for this study. In the first step, testing several most common trainers of the MLP revealed the superiority of the Levenberg-Marquardt (LM) algorithm. It, therefore, is considered as the classical training approach. Next, the optimum configurations of two metaheuristic algorithms, namely cuttlefish optimization algorithm (CFOA) and teaching-learning-based optimization (TLBO) are incorporated to optimally train the MLP. In these two models, the LM is replaced with metaheuristic strategies. Overall, the results demonstrated the high competency of the MLP (correlations above 0.997) in the presence of all three strategies. It was also observed that the TLBO enhances the learning and prediction accuracy of the classical MLP (by nearly 7.7% and 9.2%, respectively), while the CFOA performed weaker than LM. Moreover, a comparison between the efficiency of the used metaheuristic optimizers showed that the TLBO is a more time-effective technique for predicting the PE. Hence, it can serve as a promising approach for indirect PE analysis.

• The Journal of Information Systems
• /
• v.30 no.4
• /
• pp.303-327
• /
• 2021

Purpose The online comments on news content have become social information and are understood based on deliberative democracy. Although the related research has focused on the relationship between online comments and their deliberative quality, the social information provided by online comments consists of not only direct information such as comments themselves but also indirect information such as 'likes' and 'dislikes'. Therefore, the research on online comments and deliberative quality should study this direct and indirect information together, and the direction and the degree of the indirect information should be also considered with them. Design/methodology/approach This study distinguishes comments by the attached 'likes' and 'dislikes', identifies highly supported and highly unsupported comments by the intensity of 'likes' and 'dislikes', and investigates the relationship between their existence and the deliberative quality measured as the topic diversity. Then, we applied topic modeling to the 2,390 news articles and their 74,385 comments collected from five news sites. Findings The topic diversities of the supported and unsupported comments are related to the topic diversity of all comments but the degree of the relationship is higher in the case of supported comments. Furthermore, the existence of highly supported and unsupported comments is led to less diversity of all comments compared to the case where those comments are absent. Particularly, when only highly supported comments are present, topic diversity was lower than in the opposite case.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.209-231
• /
• 2007

This paper suggested an approach to characterize travel choice behaviors using the implicit price instead of the indirect utility. The choice criterion to compare the implicit prices of available trip options was developed from the utility maximization problem of a trip maker which is supposed to choose the best option from the available ones differentiated by only by the quantitative attributes such as travel cost and time but also by qualitative attributes such as comfort and safety. The utility maximization problem is constructed under household production theory, and is incorporated with a special kind of joint homogeneous production functions. The implicit price of a certain trip option is the sum of the monetary price and the multiple of travel time and the value-of-travel-time, and the value-of-travel-time refers to the portion of wage, which can be assignable to the trip-making activity. This choice criterion is statistically identifiable, and behaviorally plausible. Moreover, this criterion has the expression simpler than the indirect utility, and therefore could be an effective target of the statistical estimation for travel choice behaviors.