• 제어로봇시스템학회논문지
• /
• 제21권6호
• /
• pp.577-582
• /
• 2015

This paper proposes an efficient detection of absolute position of a robot joint using two incremental encoders. We considers a robot joint comprising a motor, a reducer, two encoders, and a motor drive. An incremental(first) encoder provides motor's rotor position or input position of reducer while another incremental(second) encoder does output position of the reducer. A table is made where the relationship between the first and the second encoder counts is recorded. The key point is placed where the table is constructed: when a pulse occurs in the second encoder, there exists a corresponding unique count value of the first encoder. The absolute position is detected using the table by searching the second encoder position corresponding to the first encoder count value when a pulse occurs in the second encoder. The proposed method needs a small rotation, as just one second encoder's pulse angle, for the initial absolute position detection.

• 한국정밀공학회지
• /
• 제25권6호
• /
• pp.55-61
• /
• 2008

Incremental encoder is a common choice for measuring the rotational angle of an axis. It produces, however, some measurement errors, if some kinds of rotational vibration are occurred. Even by increasing the number of slits on the circular peripheral, these kinds of error can not be removed. It only decreases the probability of the error being generated by making the magnitude of encoder resolution smaller than that of the axial vibration. This paper investigates the error mechanism of incremental encoder and suggests a digital logic circuit that prevents the measurement error to happen.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.27-28
• /
• 2007

• 전력전자학회논문지
• /
• 제10권3호
• /
• pp.290-295
• /
• 2005

전동기 위치 또는 속도를 측정하기 위하여 많이 사용되고 있는 증분형 엔코더의 출력신호는 고주파 디지털 신호로 PWM 인버터 등 전력용반도체 회로의 스위칭에 의하여 발생되는 전자파에 많은 영향을 받으며, 이 엔코더 출력신호에 포함한 노이즈는 일반적인 저역필터로 제거하기 힘들다. 본 논문에서는 엔코더 신호에 포함된 노이즈 성분을 완전히 제거할 수 있는 엔코더 출력신호 노이즈 제거용 디지털 필터회로를 개발하였다. 노이즈의 특성 즉 노이즈 주파수에 따라 필터내의 카운터 값 및 입력 클럭의 주파수를 쉽게 변경시킬 수 있으므로 어떤 노이즈 성분도 거의 완벽하게 노이즈를 제거할 수 있다. 시뮬레이션 및 실험을 통하여 이 디지털 필터의 성능을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.1-4
• /
• 2001

SRM(Switched Reluctance Motor) uses reluctance torque by pulse excitation control. SRM drives are much studied in electrical vehicles and industrial application due to the simple, robust mechanical structure and high speed characteristics. For the high performance control of SRM, it is necessary to synchronize the stator phase excitation with the rotor position. This paper proposes a new encoder for high performance excitation control of SRM. The proposed encoder has complex structures of incremental and absolute encoder. An each phase inductance profile can be synchronized with 4-bit absolute position signal and incremental pulses are used for speed detection. Low cost and simple manufacturing of SRM encoder is possible.

• 전력전자학회논문지
• /
• 제18권6호
• /
• pp.556-564
• /
• 2013

This paper proposes an initial rotor position detecting algorithm of a PM synchronous motor using an incremental encoder. The proposed algorithm estimates the phase offset between the rotor magnetic flux and the Z-pulse of the incremental encoder by applying six aligning mode current control. The absolute rotor position for driving a PM synchronous motor is calculated by using the phase offset of the Z pulse and A, B pulse signals of the encoder. The PMSM drives based on the estimated rotor position is applied to the elevator door system. The door length is measured on line at first setup of the elevator. The speed control for open, close, and reopen of the elevator door is also presented and the proposed algorithm for the elevator door system is verified by experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1191-1193
• /
• 2001

In switched reluctance motor(SRM) drive, it is necessary to synchronize the stator phase excitation with the rotor position. Therefore, the rotor position information is essential. Usually, optical encoders or resolvers are used to provide the rotor position information. These sensors are expensive and are not suitable for high speed operation. This paper proposes a new encoder for high performance excitation control of SRM. The proposed encoder has complex structures of incremental and absolute encoder. An each phase inductance profile can be synchronized with 4-bit absolute position signal and incremental pulses are used for speed detection. Low cost and simple structure are possible.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 추계학술대회 논문집
• /
• pp.21-22
• /
• 2012

This paper propose initial rotor position detecting algorithm of incremental encoder. The proposed algorithm estimates d-axis initial position of PMSM using 6 step operation. The proposed algorithm is verified by experimentally.

• 제어로봇시스템학회논문지
• /
• 제15권1호
• /
• pp.82-88
• /
• 2009

The output of the encoder is a digital pulse, which is also easy to be connected to a digital controller. There are various angular velocity detecting methods of M, T, and M/T. Each of them has its own properties. There is a common limitation that the angular velocity detection period is strongly dependent on the destination velocity magnitude in case of ultimate low range. They have ultimately long detection period or cannot even detect angular velocity at near zero velocity. This paper proposes a zero velocity detectable sensor algorithm with the dual encoder system. The sensor algorithm is able to keep detection period moderately at near zero velocity and even detect zero velocity within nominal period. It is useful for detecting velocity in case of changing rotational direction at which there occurs zero velocity. In this paper, various experimental results are shown for the algorithm validity.

• 전자공학회논문지B
• /
• 제33B권7호
• /
• pp.183-188
• /
• 1996

In this paper, we propose a new method which estimates the initial position of a PM synchronous motor (PMSM) using an incremental ecoder. in cremental encoders are widely used in detecting rotor position since they are inexpensive. At starting procedure, however, the incremental encoders cannot give the information of the absolute rotor position. Hence, additional absolue encoder, which has $60^{\circ}C$ resolutio electrically, and signal lines called U, V, W, have been used in practical systems for starting injection of a high frequency test current. It does not require any additional information such as U, V, W signals for starting procedure and allows for cheap and simple implementation. Experimental results show that the proposed method can estimate the initial rotor positon with higher accuracy than the conventional method using U, V, W signals.