• Journal of Mushroom
• /
• v.17 no.4
• /
• pp.211-217
• /
• 2019

Currently, cultivation of mushrooms using the Information and Communication Technology (ICT)-based smart farming technique is increasing rapidly. The main environmental factors for growth of mushrooms are temperature, humidity, carbon dioxide (CO₂), and light. Among all the mentioned factors, currently, only temperature has been maintained under automatic control. However, humidity and ventilation are controlled using a timer, based on technical experience.Therefore, in this study, a Pleurotus eryngii first-generation smart farm model was set up that can automatically control temperature, humidity, and ventilation. After installing the environmental control system and the monitoring device, the environmental condition of the mushroom cultivation room and the growth of the fruiting bodies were studied. The data thus obtained was compared to that obtained using the conventional cultivation method.In farm A, the temperature during the primordia formation stage was about 17℃, and was maintained at approximately 16℃ during the fruiting stage. The humidity was initially maintained at 95%, and the farm was not humidified after the primordia formation stage. There was no sensor for CO₂ management, and the system was ventilated as required by observing the shape of the pileus and the stipe. It was observed that, the concentration of CO₂ was between 700 and 2,500 ppm during the growth period. The average weight of the mushrooms produced in farm A was 125 g, and the quality was between that of the premium and the first grade.In farm B. The CO₂ sensor was in use for measurement purposes only; the system was ventilated as required by observing the shape of the pileus and the stipe. During the growth period, the CO₂ concentration was observed to be between 640 and 4,500 ppm. The average weight of the mushrooms produced in farm B was 102 g.These results indicate that the quality of the king oyster mushroom is determined by the environmental conditions, especially by the concentration of CO₂. Thus, the data obtained in this study can be used as an optimal smart farm model, where, by improving the environmental control method of farm A, better quality mushrooms were obtained.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.4
• /
• pp.275-284
• /
• 1997

This experiment was carried out to measure the sinking depth of each buoy, the change in the net shape of the net, and the tension of sand bag line according to the R (from bag net to the fish court) and L (from fish court to the bag net) current directions and their velocity by the model experiment. The model net was one-fiftieth of the real net, and its size was determined after considering the Tauti’s Similarity Law and the dimension of the experimental tank. 1. The changes of the net shape were as follows : In the current R, the end net of fish court moved 20mm down the lowerward tide and 10mm upper part. So the whole model net moved up at 0.2m/sec. The shape of the net showed an almost linear state from bag net to the fish court at 0.6m/sec. In the current L, the door net moved 242mm down the lowerward tide and 18mm upper part. So the whole model net moved up at 0.2m/sec. The net shape showed an almost linear state from the fish court to the bag net at 0.5m/sec. 2. The sinking depths of each buoy were as follows: In the current R, the head buoy started sinking at 0.2m/sec and sank 20mm, 99mm at 0.3m/sec and 0.6m/sec, respectively. The end buoy didn't sink from 0m/sec to 0.6m/sec but showed a slight quake. In the current L, the end buoy started sinking at 0.1m/sec, and sank 5mm and 108mm at 0.2m/sec and 0.6m/sec, respectively. The whole model net sank at 0.5m/sec except the head buoy. 3. The changes of the sand bag line tension were as follows: In the current R, the tension affected by the sand bag line of the head buoy showed 273.51g at 0.1m/sec increased to 1298.40g at 0.6m/sec. In the current L, the tension affected by the sand bag line of the end buoy on one side showed 137.08g at 0.1m/sec increased to 646.00g at 0.6m/sec. The changes in the sand bag line tension were concentrated on the sand bag line of the upperward tide with increasing velocity at the R and L current directions. However, no significant increase in tension was observed in the other sand bag lines.

• Journal of Bio-Environment Control
• /
• v.15 no.2
• /
• pp.167-172
• /
• 2006

The objective of this study was to determine the effects of substrate water content and electrical conductivity (EC) on the incidence of brown fruit stem and blossom end rot in glasshouse sweet pepper (Capsicum annuum cv. Special). Three levels of water content and EC had been treated since the first fruit reached 3cm in diameter: that is, 49 (low), 65 (medium), and 86% (high) for water content, and 2.4 (low), 4.2 (medium) and $6.3dS{\cdot}m^{-1}$(high) for EC. Shoot growth was reduced with decreasing water content, and it was lower in both high and low EC treatments than medium EC treatment. Fruit weight at harvest was greater in both medium and hish water content treatments than low water content treatment (158g vs 146g). High EC reduced fruit weight compared to or low EC treatments. The incidence of brown fruit stem increased with increasing water content and with decreasing EC. The highest incidence was shown in the high water content/low EC treatment (38%), which was considerably higher than 2.4% of the low water content/high EC treatment. Blossom end rot occurred in general in the low water content and/or high EC conditions. These results indicated that substrate water content and EC should be controlled differently according to the growth stage, to reduce the incidence of blossom end rot and brown fruit stem in glasshouse sweet pepper. First, to reduce blossom end rot incidence, water content should be maintained high (86%) and EC low ($2.4dS{\cdot}m^{-1}$) until Sweets after fruit set. Secondly, to reduce brown fruit stem incidence, water content should be maintained low (49%) and EC high ($6.3dS{\cdot}m^{-1}$), especially after completion of fruit growth.

• Korean Journal of Ecology and Environment
• /
• v.44 no.2
• /
• pp.203-213
• /
• 2011

Agriculture modern environments can vary due to factors such as land consolidation and ditch enhancement projects. But, these improvements projects can include cover-ing-up of irrigation ditches with concrete, increasing the drop between paddy field and drainage ditches, which might decrease the abundance and diversity of fish fauna around paddy fields. In this study, for the management of agrobiodiversity on fish in paddy fields, we installed a small-scale fishways between paddy fields and drainage ditches, and evaluated the effects on the eco-connection of the paddy fields, ditches and stream. Five fish species were recovered at the drainage ditches. The species exhibited characteristics spawning and growth based on the paddy field. The results indicate that the five fish species could ascend the paddy fields through the small-scale fishways. There are no difference of species numbers at ditches of environment-friendly agriculture paddy fields (A) and good agricultural practices (B) region, but individual numbers were higher at the B region. This result could be interpreted as indicating that ditch diversity was affected by positional properties rather than farming practices because the water flow and connection to adjacent stream of B region were better than A region. After ascertaining the fish species capable of ascending in a pre-survey of the drainage ditches, we set up small-scale fishways at the drop between paddy fields and drainage ditches. Three species of fish (Aphyocypris chinensis, Misgurnus anguillicaudatus, M. mizolepis) arrived at the paddy fields via small-scale fishways. The main movement time was from 18:00~24:00 and 00:00~06:00, indicating a preference for the night time period rather than the day period for migration. Concentrating the operation time from night to dawn seems prudent for effective management of small-scale fishways.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.119-126
• /
• 2012

State of problem: Cement-retained implant-supported prostheses are routinely used in dentistry. The use of high strength cements has become more popular with the increasing confidence in the stability of the implant-abutment screw connection and the high survival rates of osseointegrated implants. No clinical data on retention of metal copings using CAD/CAM. To evaluate retention of metal copings using CAD/CAM system bonded to short titanium abutment with four different cements and compare retentive strength of metal copings with sandblasting or without sandblasting before cementation. Forty titanium abutment blocks were fabricated and divided into 4 groups of 10 samples each. Forty metal copings with occlusal hole to allow for retention testing were fabricated using CAD/CAM technology. The four cements were Fujicem(Fuji, Japan), Maxcem Elite(Kerr, USA), Panavia F2.0(Kurarary, Japan) and Superbond C&B(Sunmedical, Japan). The copings were cemented on the titanium abutment according to manufacture's recommendation. All samples were stored for 24h at 37oC in 100% humidity and tested for retention using universal testing machine(Instron) at a crosshead speed of 1.0mm/min. Force at retentive failure was recorded in Newton. The mode of failure was also recorded. Means and standard deviations of loads at failure were analyzed using ANOVA and Paired t-test. Statistical significance was set at P<0.05. Panavia F2.0 provided significantly higher retentive strength than Fujicem, Maxcem Elite(P<0.05). Sandblasting significantly increased bond strength(P<0.05). The mode of failure was cement remaining principally on metal copings. Within the limitation of this study, Panavia F2.0 showed significantly stronger retentive strength than Fujicem, Maxcem Elite(p<0.05). The Ranking order of the cements to retain the copings was Panavia F2.0, Fujicem = Maxcem Elite. Sandblasting significantly increased bond strength(P<0.05). The retentive strength of metal copings on implant abutment were influenced by surface roughness and type of cements.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.6
• /
• pp.836-845
• /
• 1999

Background : Obesity is present in the majority of adult patients with obstructive sleep apnea(OSA) and is considered to be a major risk factor for its development. A reduction in body weight has been associated with substantial improvement in the severity of apnea. However, a variety of treatment strategies for obesity have yielded limited sucess. This study was done to determine resting energy expenditure(REE) in patients with obstructive sleep apnea and the correlation between the severity of sleep apnea and REE, and to investigate whether leptin influences REE and correlated with the severity of sleep apnea in 39 patients with OSA and 45 controls matched for obesity. Method : Overnight polysomnography was performed on all subjects using standard techniques. Measurements of REE were made using a Sensormedic Vmax 229 and a canopy system. Serum leptin concentration was measured by human leptin RIA kit of LINCO Research INC. Results : REE was greater in patients with OSA compared with controls, but there was no difference between the two groups on REE%. And also there was no significant correlation between anthropometric data, polysomnographic data and REE%. Serum leptin was linearly related to body mass index(BMI), apnea index, apnea hypopnea index and lowest arterial oxygen saturation($SaO_2$) but not related to REE%. Conclusion : This study suggests the followings. Firstly patients patients with sleep apnea have a pattern of obesity characterized by energy homeostasis at an elevated body weight set-point. In order to achieve a lower body weight in these patients, it may be necessary to increase energy expenditure by increasing physical activity. Secondly leptin level was not correlated with REE, suggesting that leptin may predominantly regulate body fat by altering eating behavior rather than calorigenesis. Lastly leptin level was significantly correlated with the severity of sleep apnea. These elevated level of leptin in patients of sleep apnea may be related to the obesity, however it needs further studies to determine the relationship between the severity of sleep apnea and serum leptin.

• Journal of agricultural medicine and community health
• /
• v.23 no.2
• /
• pp.305-310
• /
• 1998

The usage or agricultural chemicals is on the increasing tendency. Methyl bromide and organophosphate are the most widely used toxic agricultural chemicals in Korea. We try to set up the methods to detect the accumulation of these chemicals in Korean farmers. Blood samples were collected for 121 farmers of slack's season in February 1998. And survey about arable acreage and usage of the gloves and masks was also performed. Serum cholinesterase activities and bromide concentrations were measured with gold chloride method and colorimetric method. The reference ranges of serum cholinesterase activity and bromide concentration were 1.6~15.9 U/mL and below $72.9{\mu}g/mL$. Serum bromide concentrations of farmers and normal controls showed no differences. Serum cholinesterase activities of farmers were significantly higher than those of normal controls. According to the arable acreages and usage of the gloves and masks, serum bromide concentrations and cholinesterase activities showed no differences. In conclusion, serum cholinesterase activities and bromide concentrations showed no differences between farmers of slack's season and normal controls.

• Korean Journal of Child Studies
• /
• v.1
• /
• pp.65-81
• /
• 1980

This study is aimed at investigating the compensatory education which was already implemented or is being implemented in the U.S.A. and Japan; and at studying the types of programs and their characteristics; and at sounding out the possibilities of the application of such programs in family and social conditions is Korea. In order to achieve the above mentioned objectives, the established items for the study are as follows: (1) Various types of early children's education (2) Programs of compensatory education for the disadvantaged Children (3) Head Start Program, Early Training Project and Montessori School (4) Integrated Preschool Programs (5) Day-Care Center for employed mothers We investigated the various compensatory education programs for the preschool children who are in economically, socially, culturally disadvantaged conditions. Head Start Programs were federally supported programs for preschool children and opened as summer programs in 1965 for the first time. The purpose of Head Start has been to give preschool children the kinds of experiences they need in preparation for school. The Head Start children were found to be significantly better prepared for school than the normal children. However, after six to eight months, their initial advantages had virtually. disappeared and then the simple problem with Head Start and other such programs was that little long-term good could be evidenced unless the high quality educational environment was maintained. Therefore, to solve this problem, three other programs were funded as part of the overall Head Start. These three programs are the Parent-Child Center, Home Start, and the Child and Family Resources Program. The Early Training Project for disadvantaged children was implemented by Klaus and Gray of Peabody College in 1962. The program was a field research study concerned with the development and testing over time of procedures for improving the educability of young children from low income homes. Its major concern was to study whether it was possible to offset the progressive retardation observed in the public schooling careers of children, living in deprived circumstances. Children, who were trained through the Early Training Project were superior to control groups in the test of IQ and vocabulary as well as linguistic abilities, and preparation for reading. This project showed the possibilities which could prevent preschool children from being disadvantaged socially, culturally and mentally. In 1907, Montessori School was established by Maria Montessori in Italy and her school program has been introduced at present to several countries in the world as one compensatory educations. She first began her experimental methods with retarded children, followed by disadvantaged children from the tenements of Rome. The Montessori approach futures a prepared environment and carefully designed, self-correcting materials. The Montessori curriculum presents tastes that feature sequence, order, and regularity, in addition to those that develop motor and sensory skills. She was interested in children's intellectual development and in developing good work habits. One of the latest developed programs for disadvantaged children is "Integrated Preschool Program" which has successfully integrated handicapped and nonhandicapped children. Several studies have showed that handicapped children in integrated school environments are accepted by and interact with their nonhandicapped peers. In fact, this program provides a number of potential, and perhaps opportunities for nonhandicapped children to serve as valuable resources in fostering the development of their handicapped peers. Next we turn to Japanese programs which are divided into two different types. One is Day-Care Center which was established by Child Welfare Law and the other is kindergarten organized by School Education Law. The kindergarten opened in 1876 and it has been part of school systems since 1947 by the implementation of education law, and the Day-Care Center which started in 1890 for the employed mothers. was changed into Day-Nursery by the enactment of child welfare law in 1947. The laws and operational regulations for the Day-Nursery were set up and were put in effect by the establishment standard acts of children welfare facilities, and the Day-Nursery has been operated in various types by the increasing demand, chiefly because of the socio-economical changes of family structures in both urban and suburban areas. Nursery education for physically and mentally disadvantaged children is for those who are blind, deaf and dumb, mentally retarded; physically disadvantaged by accidents or diseases. Montessori education in Japan was started in 1968 and many research groups for studying Montessori were organized. In 1977, Montessori remedial education society was also organized in which they started a number of studies; a study for developing materials; in-service training for the remedial education; and seminars and lectures, etc It is strongly suggested that we study the early educations that are being implemented in Japan and a variety of compensatory educations that were already implemented in the U.S.A. and modify them for the organization of our own model and properly accommodate them to our social needs.

• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.410-419
• /
• 2005

Community structure of evergreen broad-leaved forest of Mt. Yeogwi in Jin-do was investigated to secure sustainable conservation of evergreen broad-leaved forest. Twenty survey plots of $20m{\times}20m$ were established along the elevation from 200 m to 390 m above the sea level in the northwestern slope. The woody species were tallied at each plots. DBH distribution of the major evergreen broad-leaved trees was investigated to find out the spatial distribution. Cluster analysis was applied to a set of vegetation data, that is, importance value to classify the forest community. Species diversity, evenness and species correlation were analysed. Canonical correspondence analysis was also applied to vegetation data and soil environmental data. Cluster analysis showed that the forests of Mt. Yeogwi were classified into 2 community groups, such as Camellia japonica community group and Quercus acuta community group. C japonica community group was subdivided into C japonica- evergreen broad-leaved trees community, C. japonica-Neolitsea sericea community, and C. japonica-deciduous broad-leaved trees community. Q. acuta community group was subdivided into Q. acuta-C. japonica community, and Q. acuta community. C. japonica, Q. acuta, N. sericea, Machilus thunbergii and Illicium religiosum were dominant evergreen broad-leaved tree species, while Styrax japonica, Lindera erythrocarpa, Cornus kousa, Prunus sargentii, Albizzia julibrisin and Quercus acutissima were major deciduous tree species. Species diversity was greater in Q. acuta community group (0.8231 for Q. acuta-C. japonica community, and 0.8135 for Q. acuta community) than in C. japonica community group (0.7674 for C. japonica-evergreen broad-leaved trees community, 0.6164 for C. japonica-N. sericea community, and 0.7931 for C. japonica-deciduous broad-leaved trees community). DBH 2 cm~10 cm of major evergreen broad-leaved trees occupied 80% of all. C. japonica of less than DBH 5 cm tended to aggregate but distribute randomly or regularly with increasing DBH. Q. acuta distributed more aggregately than C. japonica and Machilus thunbergii for more than 15 cm of DBH. C. japonica correlated negatively with Q. acuta, I. religiosum and C. kousa, but positively with N. sericea. with significance at 1% level. Q. acuta correlated negatively with C. japonica, N. sericea and M. thunbergii but positively with l. religiosum. There were also negative correlation between N. sericea and C. kousa. CCA showed that forest communities were correlated with soil variables such as CEC, soil organic matter and soil pH. With increased soil organic matter and CEC, and decreased soil pH, C. japonica was dominant and forest community and Q. acuta and N. sericea tended to develop in the evergreen broad-leaved forest.

• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.1-8
• /
• 1976

One of the most common needle leaf species used in planting in Korea is korean pine (Pinus koraiensis S. et Z.), and jack pine (Pinus banksiana Lamb.) is one of the test species for suitability. The relation of nursery bed density of 2-1 korean pine and 1-1 jack pine was studied at the Kwang Nung Nursery, Central Branch Station of Forest Research Institute, and about 40km north of Seoul. Nursery bed density of 2-1 korean pine, which ranged from 36 to 324 trees per square meters and of 1-1 jack pine, which ranged from 25 to 169 trees per square meters, had a marked effect on caliper, height, dry weight and percent and amount of plantable stock. The soil physical and chemical properties is silt plus clay, 50.55 percent; organic matter, 2.09 percent; total nitrogen, 0.13 percent; available phosphorus, 253.25 ppm; exchangeable potash, 0.46 m.e/100g; and pH, 5.58. As the density of the nursery seedling stand of 2-1 korean pine increases, the average tree height increases (Fig. 1A), but in 1-1 jack pine density do not affect to increase or decrease the average tree height. As the density of nursery bed increases, the average stem caliper (at 2cm above ground line) and dry weight decrease (Fig. 1B), but the decreasing rate is more seriously in 1-1 jack pine than 2-1 korean pine (Fig.5). As increasing the density of nursery bed, the T/R ratio of trees of the test species increase. Also the dry weight of leaf, stem and root parts are decreasing in proportion to the increase of stand density, but the drop rate of jack pine is more rapid than korean pine (table. 1) The patent facts of difference of growth characteristics between 2-1 korean pine and 1-1 jack pine were studied. These facts should be used to select the scale of stand density at the nursery bed or the plantable site. Korean pine is demanded high density, on the other hand in jack pine low density are more suitable to manage the stand density. Stands of comparatively low density had the greatest percentage of high-quality stock, and the stands of high density had less than the high quality trees of low density. An important criterion of the best density is percent and number of high-quality trees produced per square meter of bed area. Stem caliper and stem height of seedling is used in most public nurseries to sort seedling into plantable grades. The stock grade standard has set at 4.5mm caliper and 16cm height of 2-1 korean pine as the minimum desired stem caliper and height. By the result studies, the plantable stock grade standards of 2-1 korean pine used at stem height 16cm and stem caliper 4.5mm from public nurseries should be reformed to stem height 18cm and stem caliper 4.0mm by the growth characteristics and the tree distribution of stem height and caliper of relation to density. For the 2-1 korean pine, best density should be about 160 to 200 trees per square meter according to soil fertility. For the 1-1 jack pine, the suitable standard of plantable stock should be at stem height 25cm and caliper 6mm (at 2cm above ground line) and best density was about 100 to 120 trees.