• Membrane and Water Treatment
• /
• 제10권3호
• /
• pp.231-237
• /
• 2019

Peroxymonosulfate (PMS) in combination with Cu(II) was examined to inactivate E. coli and MS2 coliphage in natural water. The combined system (i.e., the Cu(II)/PMS system) caused a synergistic inactivation of E. coli and MS2, in contrast with either Cu(II) or PMS alone. Increasing the concentration of PMS enhanced the inactivation of E. coli and MS2, but after a certain point, it decreased the efficacy of the microbial inactivation. In the Cu(II)/PMS system, adding reactive oxidant scavengers marginally affected the E. coli inactivation, but the inhibitory effects of copper-chelating agents were significant. Fluorescent assays indicated that the Cu(II)/PMS system greatly increased the level of reactive oxidants inside the E. coli cells. The sequential addition of Cu(II) and PMS inactivated more E. coli than did adding the two simultaneously; in particular, the inactivation efficacy was much higher when Cu(II) was added first. The observations from the study collectively showed that the microbial inactivation by the Cu(II)/PMS system could be attributed to the toxicity of Cu(I) as well as the intracellular oxidative stress induced by Cu(III) or radical species.

• 한국축산식품학회지
• /
• 제29권3호
• /
• pp.310-316
• /
• 2009

In this study, the influence of pressure assisted mild thermal inactivation (PAMTI) on E. coli ATCC 10536 was examined at 200 MPa and temperature range of $20-50^{\circ}C$. Inactivation rate significantly increased (p<0.05) as temperature and time increased at 200 MPa. The maximum inactivation (7.91 log reduction) was obtained at $50^{\circ}C$ for 30 min under 200 MPa, which meant the complete inactivation of E. coli ATCC 10536. Inactivation kinetics were evaluated with the first order inactivation rate (k), activation energy ($E_a$), thermal death time (TDT), and z value. Kinetic parameters were significantly (p<0.05) influenced by variation temperature of PAMTI. In this study, the synergistic effect of pressure and temperature were found in the inactivation of E. coli ATCC 10536 through PAMTI.

• 농업과학연구
• /
• 제50권3호
• /
• pp.417-425
• /
• 2023

Because an irradiation of 405 nm violet light could have a strong energy, it was used to be sterilized against various microbes in the indoor air condition or fresh food. Escherichia coli is a representative bio-pollutant in the indoor air-borne bacteria, and a hygienic microbe in the horticultural food. This study evaluated the inactivation influences on E. coli DS5α after exposure to 405 nm violet-light (VL) by investigating irradiating time, and the vertical and horizonal distance from light source. The illumination of 405 nm VL was inversely proportional to the distance from the VL source. E. coli DS5α on nutrient agar (NA) was inactivated approximately 50% more than the control when irradiated at 65 cm from 405 nm VL for 3 hours. When compared to the control, E. coli DS5α was inactivated approximately 50% within 70 cm from 405 nm VL for 3 hours. As it was irradiated for 3 hours 70 cm away from 405 nm VL, the horizonal distance from the point was negatively correlated to the inactivation of E. coli DS5α. These results indicated that the inactivation of E. coli DS5α grown on NA medium needs to be irradiated with 405 nm within 70 cm from the light source for 3 hours.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.421-424
• /
• 2002

Deterministic and probabilistic approaches to the design of ultraviolet (UV) disinfection system for water reclamation are reviewed and discussed. The high inactivation of TC, FC and E. coli by UV disinfection was demonstrated and the inactivations of TC, FC and E. coli were 97%, 98% and 99%, respectively. Within the range of 0.3-4.5mWs/cm, the effect of UV does on the inactivation ratio was not observed. However, in the highest wattage of UV lamp, 39W, the inactivation ratio of TC, FC and E. coli was 100%, regardless of the UV does so the UV density was more effective on inactivation ratio of TC, FC and E. coli rather than UV does. Under the 0.4 mWs/cm and 16W of UV lamp, the effect of dissolved organic matter and turbidity on the inactivations of TC, FC and E. coli could not be observed in this study within the range of 0-60mg/L and 0-40 NTU respectively.

• 산업식품공학
• /
• 제13권2호
• /
• pp.122-129
• /
• 2009

자외선 살균소독기의 유효성을 검정하기 위하여 스테인리스스틸 컵 바닥에서 E. coli를 대상으로 살균력을 측정하고 살균패턴을 조사하였다. 스테인리스스틸 컵 바닥의 자외선 강도는 컵의 위치에 따라 큰 차이를 보였다. 중앙부에 놓인 컵의 바닥에서는 높은 자외선 강도를 보인 반면 외곽으로 갈수록 자외선 강도는 급격하게 약화되었으며, 이러한 편차는 상단 선반에서 가장 심하였고 중단 및 하단선반으로 갈수록 완화되었다. E. coli를 대상으로 한 스테인리스스틸 컵 바닥에서 살균효과는 컵 바닥의 자외선 강도와 살균시간에 비례하였다. 자외선에 의한 E. coli 살균패턴은 tailing을 수반하는 의사 1차반응으로 나타났으며 각 구간의 살균속도상수를 산출한 결과 초기 살균속도상수 ($K_{1}$)는 위치에 따라 큰 차이를 보인 반면 후기 살균속도상수($K_{2}$)는 위치에 따른 차이가 크지 않았다. 현장에서 자외선 살균소독기를 용이하게 사용할 수 있도록 일정 살균치를 얻는데 필요한 자외선 조사시간을 산출하는 방정식을 제시하였다.

• 상하수도학회지
• /
• 제30권2호
• /
• pp.139-145
• /
• 2016

Disinfection of microorganisms using UV light is widely used in the field of water supply and wastewater treatment plant, In spite of high germicidal effect and relatively clean by-product, UV disinfection has fundamental defeat that is accumulation of fouling materials at the interface of water and lamp sleeve. Non-contact type of UV photoreactor which can avoid this fouling generation was developed and the experimental performance evaluation of the system was carried out in this study. Log inactivation rate of E. coli was selected as a disinfection index. The concentration of E. coli of second clarifier effluent was $8.2{\times}10^1-8.2{\times}10^3$ colony per mL and was well inactivated by the non-contact type of UV photoreactor. Under the UV intensity condition of $2.1-2.5mW/cm^2$, E. coli removal rate was observed in the range of 54 - 95% when the HRT was increased from 10 to 52 seconds. Experimental results showed that log inactivation of E. coli was proportional to UV dosage and $200mJ/cm^2$ of UV dose is expected for the 2.0 log inactivation of E. coli from the second clarifier effluent. Between the two parameters of UV intensity and contact time which are consist of UV dose, UV intensity was 4 times more effective than contact time.

• 대한환경공학회지
• /
• 제32권11호
• /
• pp.1063-1068
• /
• 2010

본 연구는 유효한 분변오염의 지표 미생물로서 제안되고 있는 E.coli와, 병원성 바이러스에 대한 지표 미생물로 추천되는 $Q{\ss}$ 파지의 UV 및 UV/$H_2O_2$에 대한 내성을 비교하였다. 이 결과에 의거, 병원성 바이러스 관리를 위한 E.coli 규제의 유효성을 고찰하였다. 또한, 병원성 바이러스에 대한 대체 지표 미생물로써, $Q{\ss}$ 파지, T4 및 lambda 파지의 실제 하수 2차 처리 수중에서의 UV 불활성화를 비교하였다. 실험결과, $Q{\ss}$ 파지와 E.coli는 UV에 대해 거의 동등한 내성을 보였으나, UV/$H_2O_2$ 공정에 대해서는 E.coli보다 $Q{\ss}$ 파지가 더 높은 내성을 보였다. 이로부터, $Q{\ss}$ 파지가 모든 병원성 바이러스의 UV 또는 UV/$H_2O_2$에 대한 내성을 대표한다고 할 수는 없을지라도, 지표 미생물로써 E.coli의 불활성화 효과에만 의존하는 것은, 소독공정에 따라서는 바이러스류에 대해 충분한 소독효과를 얻지 못할 수도 있음을 알 수 있었다. 한편, T4 및 lambda 등 DNA 파지와 불활성화를 비교하였을 경우, $Q{\ss}$ 파지가 UV에 대해 더 낮은 내성을 보였다. 따라서, 불활성화에 대한 지표 바이러스로써 $Q{\ss}$ 파지의 이용은 낮은 UV 조사량의 도입에 의해 결과적으로 불충분한 소독효과를 초래할 수도 있을 것 같다. 이 결과는, 병원성 바이러스류에 대해 보다 충분한 불활성화를 달성하기 위해서는 RNA 파지인 $Q{\ss}$보다 T4 및 lambda 등 DNA 파지가 지표 바이러스로써 보다 유효할 수 있음을 보여준다.

• 산업식품공학
• /
• 제14권3호
• /
• pp.202-207
• /
• 2010

저온에서 미생물을 사멸시킬 수 있는 비열살균기술로 감압 플라즈마를 활용하고자 생성기체별 감압 플라즈마 특성을 비교하고 Escherichia coli 살균효과를 조사하였다. 1 Torr이하로 감압시킨 상태에서 공기, 산소, 질소를 350 mL/min으로 공급하며 플라즈마를 발생시킨 결과 아크발생 없이 균일한 플라즈마가 생성되었다. 감압 플라즈마에 의한 온도 상승은 5분 처리 시 ${10^{\circ}C}$ 내외, 10분 처리 시 ${25^{\circ}C}$ 미만이었으며, 기체 종류별로는 공기, 산소, 질소 순으로 상승도가 낮았다. 감압 플라즈마 5분간 처리로 E. coli는 5 log 이상 감소하였으며, 이후 감소율이 둔화되어 10분간 처리 후 6-7 log 정도의 감소를 보였다. 감압 플라즈마에 의한 E. coli 살균패턴은 살균속도가 높은 초기와 낮은 후기로 구분되는 2단계 1차 반응으로 확인되었으며, 초기 살균속도상수($k_{1}$)는 공기, 산소, 질소 순으로 감소하였다. 감압 공기플라즈마 살균의 작은 D값 또한 식품 표면의 오염도를 낮추기 위한 비열살균기술로서의 가능성을 제시하였다.

• 한국축산식품학회지
• /
• 제18권3호
• /
• pp.269-275
• /
• 1998

The purpose of this study was to determine the thermal inactivation of Salmonella enteritidis, Salmonella typhimurium and E. coli O111 in liquid cultures treated with microwave energy. Furthermore, this study was to introduce new methodologies for studying nonthermal microwave effects on microorganisms, using controlled microwave energy and specially designed apparatuses. For the automatic temperature control during microwave heating, the real time data acquisition and computation system is designed with BASIC routine. The automatic temperature control system used in the experiments perform relatively stable control at the experiment temperature of 45, 50, 55 60$^{\circ}C$ and 65$^{\circ}C$ for 30 minutes. The effects of microwave heating on liquid cultures was compared with that of conventional heating, still reduces effectively the number of pathogenic bacteria in liquid cultures. While no particular differences between microwave heating and conventional heating was observed in the activation of E. coli at 45$^{\circ}C$ test, the activation of Sal. enteritidis and Sal. typhimurium was slightly reduced during the microwave treatments.

• Environmental Engineering Research
• /
• 제12권2호
• /
• pp.64-71
• /
• 2007

The necessity of disinfecting playground soil is an important issue, because pathogenic protozoa, bacteria, and parasite eggs remain viable for several months and can infect children. UV irradiation has been used to decontaminate water but its effectiveness on soil is unclear. We determined the efficacy of UV radiation for inactivation of an indicator bacteria, E. coli (strain ATCC 8739), on playground soil. While 99% inactivation of E. coli in the soil was readily achieved by UV radiation within 55 min at $0.4\;mW\;cm^{-2}$, complete inactivation was not achieved, even after prolonged treatment at $4\;mW\;cm^{-2}$. This was attributed to the irregular surface of the soil. A small number of E. coli escaped the UV radiation because they were situated in indentations or under small particles on the soil surface. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) confirmed that the surface characteristics of the soil is the major limiting factor in the inactivation of E. coli by UV radiation. Thus UV treatment may not be adequate for disinfecting some soils and should be carefully evaluated before being used on playground soils.