• 한국환경과학회지
• /
• 제19권1호
• /
• pp.9-16
• /
• 2010

This pilot study evaluated fueling feasibility of sewage sludge, which contains a large amount of water content, by applying melting of thermoplastic polyethylene (PE). This study has identified a simultaneous achievement of drying and heating value improvement of the sewage sludge. The sewage sludge collected from a sewage sludge treatment plant during a winter period had a water content of 83.7 wt%, a combustible volatile content of 12.5 wt%, and an ash content of 3.8 wt%. The higher heating value (HHV) of the dried sewage sludge, before impregnation or coating of PE, was 4,600 kcal/kg. The collected sewage sludge was immersed into the melted PE solution, which had a HHV of 11,070 kcal/kg, and kept immersing with increasing reaction time. As the reaction (immersing or coating or impregnation) time increased, the water content of the sludge decreased. However, the HHV of the sludge increased with increasing the reaction time. The HHVs of the sewage sludge immersed or dipped into the melted PE solution for 15 min ranged from 6,780 to 8,170 kcal/kg with water content less than 7 wt%. This result indicates the melted PE solution can be utilized as an improvement technology for dryness and heating value of the sewage sludge with high water content. The sewage sludge impregnated or coated with melted PE can be utilized as potential fuel or energy resources.

• 한국가구학회지
• /
• 제18권2호
• /
• pp.111-119
• /
• 2007

An experiment was conducted to know the safranine impregnation distance from surface to inward using 6 different hardwood species. During impregnation, 3 parameters were applied-vacuum, pressure and soaking time. Only vacuum treatment did not increase the permeability of wood. Vacuum followed by pressure increased the penetration depth of safranine in radial, tangential and longitudinal direction. Longitudinal penetration was found easy to impregnate. Comparing with radial and tangential direction, radial penetration was found easy. There was a striking difference among sapwood and heartwood permeability. Safranine input depth was found highest in diffused porous wood rather than in ring porous wood. At increased vacuum and pressure, safranine penetration was found easy.

• 한국수소및신에너지학회논문집
• /
• 제10권3호
• /
• pp.159-170
• /
• 1999

Recently Ni/MH secondary battery have been studied very extensively because of containing no pollutants as well as superior performance. However comparing to widely studying high capacity of hydrogen storage alloys electrode, the capacity of Ni electrode is inferior. Using for high capacity Ni/MH battery as a anodic materials, the study about high capacity Ni electrode is necessary. To making high capacity Ni electrode, active materials were impregnated in various polarization impregnation conditions. Plaque, milling for 6hr and sintered at $800^{\circ}C$, indicated porosity over 80%, and porosity were increased with proper condition electrochemical etching treatment. Proper impregnation condition was 40~80mA/cm, polarizing time was 5~10min.

• 전기학회논문지P
• /
• 제59권3호
• /
• pp.311-316
• /
• 2010

According to increase of combined cycle power generation, the manufacturing market of gas turbine generator has become more competitive, so there is high pressure on the manufacturer to reduce generator price. Global VPI(vacuum pressure impregnation) method is effective to save the production cost and time for manufacturing stator windings, but it has an abrasion problem by vibration between stator windings and slots. This paper presents the insulation breakdown case, which is for VPI type generator during high voltage insulation tests, and also shows the cause analysis, repair works as well as reliability test. the purpose of this paper is to understand the insulation properties of VPI type generator and to know prevention of insulation weakness.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.88-95
• /
• 2013

Effects of beating and water immersion time on fiber swelling and paper properties were elucidated for the fundamental study of producing high bulk paper. Chemical pulps were beaten for various freeness and the beaten pulp was immersed in water up to 24 hours. Fiber swelling was evaluated by measuring water retention value (WRV). It was found that fiber swelling, bulk and paper strength were quickly changed at the initial stage of beating. Immersion in water did not significantly increase WRV, paper density and strength, implying that soaking in water alone could not effectively swell fiber wall. In order to swell further, hydrogen bonds between fibrils in fiber wall and hence fiber wall structure shall be broken by mechanical force during beating.

• Korean Chemical Engineering Research
• /
• 제61권3호
• /
• pp.472-478
• /
• 2023

본 연구에서는 공기청정기 필터용 활성탄의 아세트알데하이드 제거 특성이 금속 촉매 첨착 및 관능기 도입 방법을 사용하여 조사되었다. 야자각 차의 KOH 활성화를 통해 고 비표면적(1700 m²/g)과 미세기공이 발달한 활성탄을 제조하였으며, 금속촉매 첨착과 관능기 개질을 위해 침지 후 기공 내 건조조건에 따른 첨착 효율을 조사하였다. 제조된 활성탄의 물성은 비표면적 및 기공 분석(BET), 유도결합 플라즈마 분광 분석(ICP), 유기 원소 분석(EA) 및 푸리에변환 적외선 분광 분석(FT-IR) 등을 통해 분석하였으며, 활성탄 성능 확인을 위해 침지 농도에 따른 아세트알데하이드 흡착성능을 가스크로마토그래피(GC)로 분석하였다. 첨착용액의 농도가 증가함에 따라 금속촉매 첨착량은 증가하였으며, 비표면적은 감소하는 경향을 보였다. 각 금속촉매 첨착 및 표면개질 활성탄의 파과시험 결과 MgO10@AC, CaO10@AC, EU10@AC, H-U3N1@AC 조성에서 우수한 아세트알데하이드 흡착성능을 보여주었다. 흡착성능이 가장 뛰어난 MgO10@AC에 대해 파과 시간은 533.8 분, 흡착량은 57.4 mg/g으로 측정되었으며, 이는 활성탄에 나노 크기의 MgO 촉매를 첨착할 경우 아세트알데하이드의 카보닐기와 상호작용하여 흡착성능이 개선됨을 알 수 있었다.

• 한국응용과학기술학회지
• /
• 제20권1호
• /
• pp.72-79
• /
• 2003

The impregnated activated carbons were prepared by the incipient wetness method with the contents of $KIO_3$ varied from 1.0${\sim}$10 wt% as the impregnation material. The specific surface area and micropore volume of the rice hulls activated carbon were $2,600{\sim}2,800$ $m^2$/g and 1.1${\sim}$1.4 cc/g, respectively. With increasing the contents of impregnation materials, the surface area and micropore volume decreased by 3${\sim}$21%. However, The amounts of hydrogen sulfide adsorbed increased by 2.1${\sim}$2.8 times depending on the impregnation content. The optimum contents of $KIO_3$ were 2.4 wt%. Although the breakthrough time and adsorption capacity of hydrogen sulfide decreased with increasing temperature in the case of the unimpregnated activated carbons, they increased by 1.2${\sim}$ 3.2 times for the case of the impregnated activated carbons. The optimum aspect ratio(L/D) was 1.0 and the adsorption amount of hydrogen sulfide enhanced with increasing the gas flow rate. The regeneration temperature was determined as 400$^{\circ}C$ from the TGA experiment. The adsorption capacity of hydrogen sulfide with the impregnated activated carbon decreased gradually as the regeneration continued. The hydrogen sulfide adsorption amount of the regenerated activated carbon up to 4 times was still higher than that of the unimpregnated activated carbon.

• 청정기술
• /
• 제16권4호
• /
• pp.265-271
• /
• 2010

경유차 매연저감장치에서 비활성화된 디젤산화촉매(DOC)를 대상으로 여러 가지 조건에서 재제조한 후, 재제조된 DOC의 일산화탄소(CO)와 탄화수소화합물(THC)의 저감효율과 촉매물성 특성을 분석하여 비활성화된 DOC 촉매에 대한 재제조 효과를 관찰하였다. 재제조된 DOC촉매에 대한 오염물질 저감성능 평가는 디젤엔진 다이나모 장치를 이용, 배기가스를 일부 우회시켜 온도와 공간속도조절이 가능한 촉매반응장치로 수행하였으며, 촉매물성 분석은 광학현미경, EDX, ICP, TGA 그리고 porosimeter를 이용하였다. 연구수행 결과 비활성화된 DOC 촉매를 본 연구에서 적용된 고온배소세정, 산성/염기성용액에 의한 초음파세정, 세정 후 촉매활성성분 재함침에 의한 재제조를 수행할 경우, 재제조된 DOC 촉매의 성능이 신품 성능의 90% 이상으로 회복되는 것을 확인하였으며, 광학현미경, EDX, TGA와 ICP등의 분석을 통해 본 연구조건에서의 재제조 과정으로, 촉매의 활성 저하 원인이 되었던 각종 불순 성분 대부분이 비활성화된 DOC 촉매로부터 제거되는 것을 확인하였다.

• 한국화재소방학회논문지
• /
• 제29권6호
• /
• pp.1-5
• /
• 2015

본 논문은 편백 루버에 붕산, 붕사 및 인산암모늄 수용액을 가압함침 후 외부 복사열원(25, 30 및 $50kW/m^2$)에 따른 점화시간, 임계 열유속 및 질량감소속도 등의 연소특성을 측정하였다. 실험에 사용된 시료의 크기는 $100{\times}100{\times}10mm$이며, 각 외부 복사열원에서 5분간 변화를 3회 반복 측정하였다. 연구결과, $25kW/m^2$의 외부 복사열원에 있어서 착화시간은 Type C-H를 제외하고는 17.4~21.3%의 지연효과를 나타낸 반면 35 및 $50kW/m^2$에서는 큰 차이가 없음을 알 수 있었으며, 평균질량감소속도는 Type A-H와 Type D-H에서 Type N-H보다 낮게 측정되었다. 또한, 외부 복사열원에 따른 착화시간으로부터 임계 열유속은 $14.79{\sim}17.17kW/m^2$로 $10.7kW/m^2$인 Type N-H보다 38.22~60.46% 높게 예측됨에 따라 초기 화재시 화재확대에 대한 지연효과가 있을 것으로 예상된다.

• Clinical and Experimental Reproductive Medicine
• /
• 제2권1호
• /
• pp.19-38
• /
• 1975

A total of 185 vasovasostomies were carried out for 11 years. Various factors which are of importance in fluencing the successful vasovasostomies are analysed and presented as follows: In recent years, demand of reanastomosis of the vas deferens increased considerably. An average age of the subjects is 39, and that of their wives, 33 in this series. An average interval between vasectomy and vasovasostomy is 4 years. An average number of living chidren is 2.6 at the time of vasectomy. and 2.1 at the time of time of vasovasostomy. Merchant and public official are the most commonly encounterd occupation in the present series. Coital frequencies are 2.2/week after vasovasostomy. The most common reasons for requesting the vasovasostomy are remarriage and deaths of children, especially son. Success rate is considerably higher among younger group than that of the older. Success rate is somewhat higher among groups of shorter interval between the operations (vasectomy and vasovasostomy) than that of longer interval group. Success rate is higher among bilateral vasovasostomy group than that of any others. Success rate is higher in solid splint group and no splint group than hollow splint group. The closed dressing technique of the end of splint on the scrotum is found to be reasonably effective in preventing infection. Ordinary end-to-end anastomosis and folded side-to-side anastomosis techniques are proved to be the most ideal form of modified operation for the successful vasovasostomies. The most common causes of failure are infection, injuries of blood supply, avascular necrosis due to extensive mobilization, inadequate approximation of both vasal end, hematoma, changes of epididymal environment, and early ambulation in this series. Overall success rate of the author's series is found the 81 per cent, and impregnation rate is 35 per cent. Overall results reported by other workers are that success rate regarding appearance of sperm in the semen after operation is 64 per cent, and that of impregnation after vasovasostomy is 33 per cent. The results of semen assessment performed on same cases prior to vasectomy and following vasovasostomy showed that post-vasovasostomy sperm count scarcely reached three-quaters of pre-vasectomy count.