• Applied Chemistry for Engineering
• /
• v.18 no.3
• /
• pp.296-302
• /
• 2007

A trivalent chromate conversion coating solution which is composed with $KCr_2(SO_4)$ as main component was investigated to test a feasibility of use as an alternative six-valent chromate conversion coating for improvement of anti-corrosion of zinc plating. The proposed trivalent convesion coating was consisted of $KCr(SO_4)$ 35~45 g/L as trivalent chromium source, $NaH_2PO_4$ 20~30 g/L as phosphate, $CoSO_4$, 10~20 g/L, $ZnSO_4$ 10~20 g/L as metallic sulfates. This trivalent chromate films which are coated by this chromate conversion coating solution under pH 2.0~2.2, immersion time of 20~25 s at room temperature are able to achieve over 120 h in neutral salt spray test to 5% white rust.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.380-381
• /
• 2012

Bioinspired sea urchin-like structures were fabricated on silicon by inductively coupled plasma (ICP) etching using lens-like shape hexagonally patterned photoresist (PR) patterns and subsequent metal-assisted chemical etching (MaCE) [1]. The lens-like shape PR patterns with a diameter of 2 ${\mu}m$ were formed by conventional lithography method followed by thermal reflow process of PR patterns on a hotplate at $170^{\circ}C$ for 40 s. ICP etching process was carried out in an SF6 plasma ambient using an optimum etching conditions such as radio-frequency power of 50 W, ICP power of 25 W, SF6 flow rate of 30 sccm, process pressure of 10 mTorr, and etching time of 150 s in order to produce micron structure with tapered etch profile. 15 nm thick Ag film was evaporated on the samples using e-beam evaporator with a deposition rate of 0.05 nm/s. To form Ag nanoparticles (NPs), the samples were thermally treated (thermally dewetted) in a rapid thermal annealing system at $500^{\circ}C$ for 1 min in a nitrogen environment. The Ag thickness and thermal dewetting conditions were carefully chosen to obtain isolated Ag NPs. To fabricate needle-like nanostructures on both the micron structure (i.e., sea urchin-like structures) and flat surface of silicon, MaCE process, which is based on the strong catalytic activity of metal, was performed in a chemical etchant (HNO3: HF: H2O = 4: 1: 20) using Ag NPs at room temperature for 1 min. Finally, the residual Ag NPs were removed by immersion in a HNO3 solution. The fabricated structures after each process steps are shown in figure 1. It is well-known that the hierarchical micro- and nanostructures have efficient light harvesting properties [2-3]. Therefore, this fabrication technique for production of sea urchin-like structures is applicable to improve the performance of light harvesting devices.

• Korean Journal of Materials Research
• /
• v.22 no.12
• /
• pp.664-668
• /
• 2012

ZnO nanorods were successfully fabricated on Zn foil by chemical bath deposition (CBD) method. The ZnO precursor concentration and immersion time affected the surface morphologies, structure, and electrical properties of the ZnO nanorods. As the precursor concentration increased, the diameter of the ZnO nanorods increased from ca. 50 nm to ca. 150 nm. The thicknesses of the ZnO nanorods were from ca. $1.98{\mu}m$ to ca. $2.08{\mu}m$. ZnO crystalline phases of (100), (002), and (101) planes of hexagonal wurtzite structure were confirmed by XRD measurement. The fabricated ZnO nanorods showed a photoluminescene property at 380 nm. Especially, the ZnO nanorods deposited for 6 h in solution with a concentration of 0.005M showed a stronger (101) peak than they did (100) or (002) peaks. In addition, these ZnO nanorods showed a good electrical property, with the lowest resistance among the four samples, because the nanorods were densely in contact and relatively without pores. Therefore, a ZnO nanorod substrate is useful as a highly sensitive biochip substrate to detect biomolecules using an electrochemical method.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.3
• /
• pp.109-122
• /
• 2020

In recent, projection mapping, which has attracted high attention in the field of realistic media, is regarded as a technology to increase the users' immersion. However, most existing methods perform projection mapping on static objects. In this paper, we developed a technology to track the movements of users and dynamically map the media contents to the users' bodies. The projected media content is built by predefined gestures just using the user's bare hands without the special devices. An interactive immersive media system has been implemented by integrating these dynamic projection mapping technologies and gesture-based drawing technologies. The proposed realistic media system recognizes the movements and open / closed states of the user 's hands, selects the functions necessary to draw a picture. The users can freely draw the picture by changing the color of the brush using the colors of any real objects. In addition, the user's drawing is dynamically projected on the user's body, allowing the user to design and wear his t-shirt in real-time.

• Clean Technology
• /
• v.3 no.2
• /
• pp.36-46
• /
• 1997

CFC and organic chlorine solvents has been used in the fine machinery and electronics industries for a long time since they have various excellent properties as cleaning agents. However, it is inevitable that alternative cleaning agents should be used since CFC and organic chlorine solvents were identified as ozone-depleting chemicals. There are various alternative cleaning agents. Among them, aqueous/semi-aqueous cleaning agents are environmentally friendly and promising in the long term. And their use and developement are on the increase in advanced countries, but few in our countries. In this paper, the charactistics and major components aqueous/semi-aqueous cleaning agents are analyzed and compared. And various cleaning equipments for aqueous/semi-aqueous cleaning agents such as immersion cleaner, ultronsonic cleaners, power spray cleaner, and vibration or rotational cleaners are compared and evaluated. Finally, important consideration points for selction of a cleaning system are analyzed and suggested in this paper.

• Journal of Digital Convergence
• /
• v.16 no.9
• /
• pp.383-390
• /
• 2018

The purpose of this study is to find out how the evolution of digital play in virtualization and digital play tools are combined with and stereotyping the properties of traditional play. Virtualization characteristics and play theory were examined and the case was derived in four types and analyzed in four play properties with Roser Cailliois. In the case of Agon, the targets of mutual competition are expanded to singular and plural, computer and oneself of the future, and Mimicry showed the ambiguity of the segments and boundaries crossing the on-off line boundary, and in the case of Alea, the diversity of accident occurrence by immediacy and simultaneity has been strengthened, and in the case of Ilinx, the maximization of immersion has been developed and experimented with a variety of techniques for the utilization of senses and tools and the virtuality for this. As a result, play is developing due to the tendency to expand and coexist in time and space by various fusion combinations.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.3
• /
• pp.147-154
• /
• 2017

This research was conducted to investigate the electrochemical properties of the thin air-formed oxide film-covered AZ31 Mg alloy. Native air-formed oxide films on AZ31 Mg alloy samples were prepared by knife-abrading method and the changes in the electrochemical properties of the air-formed oxide film were investigated in seven different electrolytes containing the following anions $Cl^-$, $F^-$, $SO{_4}^{2-}$, $NO_3{^-}$, $CH_3COO^-$, $CO{_3}^{2-}$, and $PO{_4}^{3-}$. It was observed from open circuit potential (OCP) transients that the potential initially decreased before gradually increasing again in the solutions containing only $CO{_3}^{2-}$ or $PO{_4}^{3-}$ ions, indicating the dissolution or transformation of the native air-formed oxide film into new more protective surface films. The Nyquist plots obtained from electrochemical impedance spectroscopy (EIS) showed that there was growth of new surface films with immersion time on the air-formed oxide film-covered specimens in all the electrolyte. The least resistive surface films were formed in fluoride and sulphate baths whereas the most protective film was formed in phosphate bath. The potentiodynamic polarization curves illustrated that passive behaviour of AZ31 Mg alloy under anodic polarization appears only in $CO{_3}^{2-}$, or $PO{_4}^{3-}$ ions containing solutions and at more than $-0.4V_{Ag/AgCl}$ in $F^-$ ion containing solution.

• Animal cells and systems
• /
• v.13 no.3
• /
• pp.331-337
• /
• 2009

Twenty-eight Anopheles species has been so-far identified in Iran, while only 8 species was proved as malaria vector. In this study, we principally examined the cuticular hydrocarbon (CHC) potency in identification of Iranian vectors of malaria and then differentiation of vector and non-vector species of Anopheles. Seven species of malaria vectors and the non-vector species, Anopheles claviger were collected throughout Iran. Female extracts were made out of every five conspecific specimens by surface immersion in pure n-hexane. Each sample was injected into a FID-GC instrument along with the known concentrations of standards. CHC profiles of the eight Anopheles species indicated no qualitative difference. The average mass of each eluted CHC were compared using Repeated ANOVA and Mann-Whitney tests. Results confirmed a significant difference in mass of each single CHC at a specific retention time (RT). Statistical comparison of CHC mass in An. sacharovi, An. stephensi, An. culicifacies and An. fluviatilis at RT 39.6 indicated significant differences (P<0.05) among these species. Analysis of CHC mass of An. dthali, An. superpictus & An. sacharovi at RT 28.5, An. stephensi & An. sacharovi at RT 30.7 and An. sacharovi & An. claviger at RT 30.6 similarly indicated significant differences (P<0.05). An. sacharovi could be distinguished from other species, which showed only trace, by integratable peaks at retention times of 29.7, 31 and 32.6. Similarly, An. claviger could be distinguished from the other species with a trace peak at RT 30.6. In order to separate An. stephensi from the five other species, the integratable peak at RT 30.7 was used. An. dthali could be identified at RT 26.2 by an integratable peak v.s. the trace peaks of other species. An. superpictus had indicator peaks at RTs 27.4 & 28.5 v.s. trace peaks of other species. An. maculipennis with its trace peak at RT 39.6 could be easily differentiated from An. fluviatilis & An. culicifacies. This study proved that all of the examined species of Anopheles could be well identified based on their quantitative differences in CHCs, except for An. fluviatilis & An. culicifacies for which no CHC indicator peak was detected.

• Elastomers and Composites
• /
• v.43 no.4
• /
• pp.264-270
• /
• 2008

$\alpha$-D-mannosyl fullerene[$C_{60}$]-functionalized gold nanoparticle films were selfassembled using the layer-by-layer method on the reactive of glass slides functionlized with 3-aminopropyltrimethoxysilane. The functionalized glass slides were alternately soaked in the solutions containing $\alpha$-D-mannosyl fullerene[$C_{60}$] and 4-aminothiophenoxide/hexanethiolate-protected gold nanoparticles. $\alpha$-D-mannosyl fullerene[$C_{60}$]-functionalized gold nanoparticle films have grown up to 5 layers depending on the immersion time. The self-assembled nanoparticle films were characterized using UV-vis spectroscopy showed that the surface plasmon band of gold at 530 nm gradually became more evident as successive layers were added to the films.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.2
• /
• pp.179-190
• /
• 2001

In this proposed study, observing and analyzing contrast enhanced abdominal CT images, we segmented the liver automatically. We computed the ratio of each gray value from the estimated gray value range. With the average value of mesh image, we distinguished the liver from the noise parts. We divided the region based on immersion simulation. The threshold value is determined from the mesh image which is generated from each gray value portion of the liver and is used in dividing the liver to the noise region. To get the outline of the liver, we generated template image which represents the lump of the liver, and subtracted it from the binary image. With the results we use the proposed algorithm using 8-connectivity instead of the present opening algorithm, to reduce the processing time. We computed the volume from the segmented organ size and presented a clinical demonstration with the animal experiment