• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.2
• /
• pp.223-228
• /
• 2016

A digital micromirror system was proposed for future smart learning. This system is the compact micro-projector with a built-in CMOS sensor modules. It can provide the various interfaces. The basis of interface is to recognize the finger tip on projected image. But the recognition rate of finger tip is very low due to various image degradations. In this paper, we propose the finger tip recognition algorithm that minimize the image degradation factors by using the Retinex transform and IR structuring light. By verifying the availability of the algorithm through experiment, the performance of finger tip recognition was confirmed. Therefore, the user interface can be able to be enhanced significantly in DMS.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.5
• /
• pp.672-677
• /
• 2010

The goal of this study is to simplify the measurement process of the flat zone length produced by a flexible disk grinding system for the process automation. The image of workpiece in the grinding process is obtained, and the cutting speed and the feeding speed are controlled carefully to maximize the flat zone length. The gradient, the inflection point and the length of the line in the image are calculated, and the length is also measured by using a projector. Processing conditions and inversely proportional to flat zone length was changing. The flat zone length is estimated by Neural network algorithm considering the process conditions with the estimated error range as 0.06~3.61%, the Neural network algorithm for the grinding process estimation is found to be useful for building the process automation database.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.6
• /
• pp.67-74
• /
• 2006

In this paper, a tiled display system is developed to get a high-resolution image in visualization of large-scale structural analysis data with low-resolution display devices and low-cost cluster computer system. Concerning the hardware system, some of the crucial points are investigated, and a new beam-projector positioner is designed and manufactured to resolve the keystone phenomena which result in distorted image. In the development of tiled display software, Qt and OpenGL are utilized for GUI and rendering, respectively. To obtain the entire tiled image, LAM-MPI is utilized to synchronize the several sub-images produced from each cluster computer node.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.3
• /
• pp.219-226
• /
• 2013

A distortion correction technique is presented to enhance the 3D scanning performance of a micro-size camera-projector system. Recently, several types of micro-size digital projectors and cameras are available. However, there have been few effort to develop a micro-size 3D scanning system. We develop a micro-sized 3D scanning system which is based on the structured light technique. Three images of phase-shifted sinusoidal patterns are projected, captured, and analyzed by the system to reconstruct 3D shapes of very small objects. To overcome inherent optical imperfection of the micro 3D sensor, we correct the vignetting and blooming effects which cause distortions in the phase image. Error analysis and 3D scanning results on small real objects are presented to show the performance of the developed 3D scanning system.

• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.305-311
• /
• 2016

If the automated image calibration system is performed in the position of non-experts, an expert will be required in every case inefficiently. But this requires an expert only when absolutely necessary. As well as the rapid system operation and efficient workforce can be managed. Image correction to perform projector inspection and management skills and to filter SW plug-in correction is that special theater system maintenance is not only managed efficiently, but also combined image analysis techniques can improve the technical perfection. This paper is to minimize the economic loss by developing a 10-bit High-depth and high-resolution $360^{\circ}$ projection image analysis technique and is to development of the special theater calibration system to effectively support quality.

• Journal of Biomedical Engineering Research
• /
• v.24 no.5
• /
• pp.473-480
• /
• 2003

Iterative reconstruction methods have played a prominent role in emission computed tomography due to their remarkable advantages over the conventional filtered backprojection method. However, since iterative reconstructions typically are comprised of repeatedly projecting and backprojecting the data, the computational load required for reconstructing an image depends highly on the performance of the projector-backprojector pair used in the algorithm. In this work we compare quantitative performance of representative methods for implementing projector-backprojector pairs. To reduce the overall cost for the projection-backprojection operations for each method, we investigate how previously computed results can be reused so that the number of redundant calculations can be minimized. Our experimental results demonstrate that the ray tracing method not only outperforms other methods in computation time, but also provides improved reconstructions with good accuracy.

• Proceedings of the IEEK Conference
• /
• 2000.06c
• /
• pp.173-176
• /
• 2000

In this study, a new multimedia data converter is proposed. Also the PC interfacing met hod using the parallel port of is suggested. The image compression/decompression is based on the JPEG algorithm, which is widely used for an effective compression in the image processing industry. The suggested interfacing method is based on the IEEE1284 and IEEE1284.3 protocol, which is a standard in the PC's parallel port interface.

• Journal of Biomedical Engineering Research
• /
• v.20 no.6
• /
• pp.523-529
• /
• 1999

방출컴퓨터단층영상술을 위한 영상재구성법에 있어서 기대값 최대화(EM)를 사용한 maximum likeihood 방법이 기존의 filtered backprojection 방법에 비해 현저한 장점을 지니고 있다는 점에서 지속적으로 그 가치가 인정되어 왔다. 그러나, 이러한 방법은 projection 및 backprojection 의 반복계산을 요하므로 영상재구성을 위한 총 계산시간이 projector 및 backprojector 의 성능에 크게 좌우된다. 본 논문에서는 EM에 근거한 영상재구성 알고리즘의 계산량을 감소시키는 방법에 관하여 논한다. 특히, projection 및 backprojection 계산을 위한 행렬의 원소중 중요한 양들을 구하는 방법과 이들을 미리 계산하여 적절한 양의 메모리에 저장하는 방법에 관하여 고찰한다. 실험에서 제안된 방법을 사용할 경우 EM 알고리즘의 계산시간을 92%까지 현저히 감소시킬 수있음을 보였다.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.248-251
• /
• 2007

In this paper, we are propose a method to estimate the 2-D mesh from structured light image for reconstruction of 3-D face image. To acquire the structured light image, we are project structured light on the face using the projector. we are extract the projected cross points from the acquire image. The 2-D mesh image is extracted from the position and angle of cross points. In the extraction processing, the error was fixed to extract the correct 2-D mesh.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.1
• /
• pp.73-85
• /
• 2008

We have manufactured a photoresist which has excellent dispersity and good applying property due to 330cps of viscosity for environment-friendly and economical maskless screen plate making. And the photoresist applied on the screen stretched was exposed without mask by beam projector with CRT light source. Then it was developed by air spray with $1.7kgf/cm^2$ of injection pressure. The pencil hardness and solvent resistance of curing photoresist film were worse than those of conventional photoresist film and the maximum resolution of line image formed by maskless screen plate making was 0.5 mm since the exposure system for maskless plate making has weak light intensity and the diffusion of light. But we could obtain maskless screen plate which has sharp edges of line image and confirm a possibility of dry development process by air spray method.