• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.46-50
• /
• 2012

Stainless steel and titanium used for orthopedic prosthetic metal, magnetic resonance imaging was measured quantitatively the extent of distortion. Based on reading tests at varying metal magnetic resonance imaging (MRI) were investigated. To two image acquisition conditions for having three metal bodies mutually quantitative it compared analyzed the image of cross direction and the image of lengthwise. As for the distortion of the magnetic resonance image, as for the distortion of image it became small in the order of Clip, Strainless and Titanium. In addition, with T1WI and T2WI which are image acquisition condition T2WI the distortion of image became small. As for the distortion of the image by the metal, you could see the distortion of image in elliptical shape, the metal a bigger image distortion appeared in many parts. If clinical doctor has the condition of the same operation, use the Titanium material, it can, raising the diagnostic value of magnetic resonance image inspection after the operating from Stainless.

• Korean Journal of Optics and Photonics
• /
• v.34 no.2
• /
• pp.61-65
• /
• 2023

This paper studies a method of applying pre-distortion to the image mask of the gobo illumination optical system to correct an irradiated image and irradiate a clear image. In the case of the gobo illumination optical system, since it is generally irradiated with a tilt, distortion in the upper and lower directions occurs severely in the image. To solve this problem, the correction coordinates of the image were derived using a proportional equation, and the distortion was corrected by applying them to the image mask. As a result, it was confirmed that the distortion was reduced by 64.5% compared to the case of using the existing image mask.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.170-183
• /
• 2024

In producing anamorphic 3D advertisement projects, it is necessary to apply the principles of illusion art to distort the images output to the screen (Image Distortion) so that their display aligns with our visual perception in a real three-dimensional environment. We focuse on the methods of image distortion in the creation of content for anamorphic 3D advertisement screens in this thesis. We propose using Unity 3D's real-time rendering instead of the offline rendering method of compositing method, and employing UV grid mapping to replace the manual correction in Adobe After Effects(AE). The significance of this paper lies in simplifying the image distortion processing workflow in anamorphic 3D projects and optimizing the image distortion creation methods used in compositing method. In outdoor anamorphic 3D advertisement projects, the proposed image distortion creation method demonstrates significant advantages in terms of production time, process simplification, flexibility, and expansion possibilities. Our research provides new perspectives and methods for the creation of anamorphic 3D content, offering theoretical and methodological references for professionals working on similar contents.

• Journal of the Optical Society of Korea
• /
• v.16 no.3
• /
• pp.270-276
• /
• 2012

An off-axis integral floating system using a concave mirror is analyzed to resolve the image distortion incurred by the off-axis optical arrangement. The concave mirror can be adopted as the floating device to improve the optical efficiency. The image distortion due to the tilting axis of the concave mirror needs to be analyzed precisely to generate the pre-distortion image. In this paper, we calculate the image deformation in the off-axis structure of the concave mirror using the geometrical optics. Using the calculation results, the compensated elemental image can be generated for the pre-distortion integrated image, which can be projected to the floating 3D image without image distortion. The basic experiments of the off-axis integral floating are presented to prove and verify the proposal.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.490-495
• /
• 1996

Though the increment of using computer vision system in modern industry, there are lots of difficulties to measure precisely because of measurement error distortion phenomenon. Among these reasons, the distortion of edge is dominant reason which is occurred by the blurred image. The blurred image is happened when camera can not discriminate its precise focus. To calibrate and generalize distortion phenomenon is important. Thus, we must fix the discrimination criteria which is collected by image recognition of precise focus. Also, radial distortion causes an inward or outward displacement of a given image point from its ideal location. This type of distortion is mainly caused by flawed radial curvature curve of the elements. Thus, we were analyzed the distortion in terms of the changed with lens magnification.

• Journal of Korea Multimedia Society
• /
• v.18 no.2
• /
• pp.106-112
• /
• 2015

In this paper, we propose a method for correction of perspective distortion on a taken image. An image taken by a camera is caused perspective distortion depending on the direction of the camera when objects are projected onto the image. The proposed method in this paper is to obtain the normal vector of the plane through the depth information using a depth camera and calculate the direction of the camera based on this normal vector. Then the method corrects the perspective distortion to the view taken from the front side by performing a rotation transformation on the image according to the direction of the camera. Through the proposed method, it is possible to increase the processing speed than the conventional method such as correction of perspective distortion based on color information.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.18-21
• /
• 2021

This paper analyzes the distortion correction of the in the micro DMD(digital micro mirror device) projector system using 0.25 or less optical throwing distance ratio. The distortion of projected image occurs depending on the performance of the optical lens, the installation location of the projection system, and the tilt of the screen. This study analyzed the physical tilt values influencing of the distortion of projected image, removed the tilt distortion of throwing distance ratio optical lens, and adjusted the distortion image by the simulation of calibration displacements. The results of this study demonstrated within 5% TV distortion reference. Moreover, the correction method reduced the pin-distortion correction of projection system.

• Journal of Conservation Science
• /
• v.37 no.4
• /
• pp.312-321
• /
• 2021

Underwater archaeology relies heavily on photography and video image recording during surveillances and excavations like ordinary archaeological studies on land. All underwater images suffer poor image quality and distortions due to poor visibility, low contrast and blur, caused by differences in refractive indices of water and air, properties of selected lenses and shapes of viewports. In the Yellow Sea (between mainland China and the Korean peninsula), the visibility underwater is far less than 1 m, typically in the range of 30 cm to 50 cm, on even a clear day, due to very high turbidity. For photographing 1 m x 1 m grids underwater, a very wide view angle (180°) fisheye lens with an 8 mm focal length is intentionally used despite unwanted severe barrel-shaped image distortion, even with a dome port camera housing. It is very difficult to map wide underwater archaeological excavation sites by combining severely distorted images. Development of practical compensation methods for distorted underwater images acquired through the fisheye lens is strongly desired. In this study, the source of image distortion in underwater photography is investigated. We have identified the source of image distortion as the mismatching, in optical axis and focal points, between dome port housing and fisheye lens. A practical image distortion compensation method, using customized image processing software, was explored and verified using archived underwater excavation images for effectiveness in underwater archaeological applications. To minimize unusable area due to severe distortion after distortion compensation, practical underwater photography guidelines are suggested.

• Journal of the Korean Society of Radiology
• /
• v.7 no.4
• /
• pp.301-305
• /
• 2013

This thesis intends to analyze tooth distortion by mandibular arch form by reproducing existing panorama image and reconstructed panorama image of Cone Beam CT data with the three-dimensional computer program. The diameter of tooth measured in Cone Beam CT's cross-section image and reconstructed panorama was synchronized without any big change from incisors to posteriors. But, panorama showed serious distortion as going to posteriors after showing a little distortion in incisors. The panorama reconstructed for patients' individual arch showed reduced distortion than panoramas used generally. In addition, panorama showed serious distortion from incisors to posteriors and it means that distortion is reduced in reconstructed panorama.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.789-792
• /
• 2003

Pipe inspection has a great importance to ensure safety for the nuclear power plant. In this paper, we designed visual inspection module for the tube internal, which diameter is 15${\sim}$20mm. And we made inspection module which consisted of CCD camera and light. And the relation between image and real world coordinate is established. Image processing is performed to calculate mapping parameter and analyze the size of defect. For the calculation of mapping parameter, experiment is performed using grid type test pattern. Acquired image is processed to extract image coordinate. Edge detection, thresholding, median filtering and morphology filtering is applied to extract grid pattern. Extracted image coordinate is used to calculate image to real world mapping. Lens distortion was considered and corrected to get exact data. Coordinate transformation data is provided for the users to recognize easily. Experiment was performed using grid type test pattern, we extracted lens distortion parameter and real coordinate of defect point. Radial distortion of lens was corrected but tangential distortion was not considered. As continuum to this study, the tangential distortion of lens is considered and improvement of analy zing technique for the tube internal be explored continuously.