• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.46-50
• /
• 2012

Stainless steel and titanium used for orthopedic prosthetic metal, magnetic resonance imaging was measured quantitatively the extent of distortion. Based on reading tests at varying metal magnetic resonance imaging (MRI) were investigated. To two image acquisition conditions for having three metal bodies mutually quantitative it compared analyzed the image of cross direction and the image of lengthwise. As for the distortion of the magnetic resonance image, as for the distortion of image it became small in the order of Clip, Strainless and Titanium. In addition, with T1WI and T2WI which are image acquisition condition T2WI the distortion of image became small. As for the distortion of the image by the metal, you could see the distortion of image in elliptical shape, the metal a bigger image distortion appeared in many parts. If clinical doctor has the condition of the same operation, use the Titanium material, it can, raising the diagnostic value of magnetic resonance image inspection after the operating from Stainless.

• 한국광학회지
• /
• 제34권2호
• /
• pp.61-65
• /
• 2023

본 논문은 고보 조명 광학계의 image mask에 사전 왜곡을 적용하여, image를 선명하게 조사 및 보정하는 방법을 연구하였다. 고보 조명 광학계의 경우, 일반적으로 기울여 조사되는 경우가 많기 때문에 image에서 상·하 방향의 왜곡이 심하게 발생한다. 이러한 문제점을 해결하기 위해 비례식을 이용해 image의 보정 좌표를 도출하고, 이를 image mask에 적용하여 왜곡을 보정하였다. 그 결과, 기존 image mask를 사용하였을 경우에 비해 왜곡이 64.5% 감소되는 것을 확인하였다.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.270-276
• /
• 2012

An off-axis integral floating system using a concave mirror is analyzed to resolve the image distortion incurred by the off-axis optical arrangement. The concave mirror can be adopted as the floating device to improve the optical efficiency. The image distortion due to the tilting axis of the concave mirror needs to be analyzed precisely to generate the pre-distortion image. In this paper, we calculate the image deformation in the off-axis structure of the concave mirror using the geometrical optics. Using the calculation results, the compensated elemental image can be generated for the pre-distortion integrated image, which can be projected to the floating 3D image without image distortion. The basic experiments of the off-axis integral floating are presented to prove and verify the proposal.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.490-495
• /
• 1996

Though the increment of using computer vision system in modern industry, there are lots of difficulties to measure precisely because of measurement error distortion phenomenon. Among these reasons, the distortion of edge is dominant reason which is occurred by the blurred image. The blurred image is happened when camera can not discriminate its precise focus. To calibrate and generalize distortion phenomenon is important. Thus, we must fix the discrimination criteria which is collected by image recognition of precise focus. Also, radial distortion causes an inward or outward displacement of a given image point from its ideal location. This type of distortion is mainly caused by flawed radial curvature curve of the elements. Thus, we were analyzed the distortion in terms of the changed with lens magnification.

• 한국멀티미디어학회논문지
• /
• 제18권2호
• /
• pp.106-112
• /
• 2015

In this paper, we propose a method for correction of perspective distortion on a taken image. An image taken by a camera is caused perspective distortion depending on the direction of the camera when objects are projected onto the image. The proposed method in this paper is to obtain the normal vector of the plane through the depth information using a depth camera and calculate the direction of the camera based on this normal vector. Then the method corrects the perspective distortion to the view taken from the front side by performing a rotation transformation on the image according to the direction of the camera. Through the proposed method, it is possible to increase the processing speed than the conventional method such as correction of perspective distortion based on color information.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.18-21
• /
• 2021

This paper analyzes the distortion correction of the in the micro DMD(digital micro mirror device) projector system using 0.25 or less optical throwing distance ratio. The distortion of projected image occurs depending on the performance of the optical lens, the installation location of the projection system, and the tilt of the screen. This study analyzed the physical tilt values influencing of the distortion of projected image, removed the tilt distortion of throwing distance ratio optical lens, and adjusted the distortion image by the simulation of calibration displacements. The results of this study demonstrated within 5% TV distortion reference. Moreover, the correction method reduced the pin-distortion correction of projection system.

• 보존과학회지
• /
• 제37권4호
• /
• pp.312-321
• /
• 2021

Underwater archaeology relies heavily on photography and video image recording during surveillances and excavations like ordinary archaeological studies on land. All underwater images suffer poor image quality and distortions due to poor visibility, low contrast and blur, caused by differences in refractive indices of water and air, properties of selected lenses and shapes of viewports. In the Yellow Sea (between mainland China and the Korean peninsula), the visibility underwater is far less than 1 m, typically in the range of 30 cm to 50 cm, on even a clear day, due to very high turbidity. For photographing 1 m x 1 m grids underwater, a very wide view angle (180°) fisheye lens with an 8 mm focal length is intentionally used despite unwanted severe barrel-shaped image distortion, even with a dome port camera housing. It is very difficult to map wide underwater archaeological excavation sites by combining severely distorted images. Development of practical compensation methods for distorted underwater images acquired through the fisheye lens is strongly desired. In this study, the source of image distortion in underwater photography is investigated. We have identified the source of image distortion as the mismatching, in optical axis and focal points, between dome port housing and fisheye lens. A practical image distortion compensation method, using customized image processing software, was explored and verified using archived underwater excavation images for effectiveness in underwater archaeological applications. To minimize unusable area due to severe distortion after distortion compensation, practical underwater photography guidelines are suggested.

• 한국방사선학회논문지
• /
• 제7권4호
• /
• pp.301-305
• /
• 2013

Cone Beam CT 데이터를 3차원 컴퓨터 프로그램을 이용하여 기존의 파노라마 영상과 재구성된 파노라마 영상을 재현해서 악궁형태에 따른 치아의 왜곡을 분석하고자 하였다. Cone Beam CT의 횡단면 영상과 재구성 파노라마에서 측정된 치아의 직경은 전치부에서 구치부로 갈수록 큰 변화없이 일치되는 것을 알 수 있었다. 하지만 파노라마는 전치부에서 약간의 왜곡이 보이다가 구치부로 갈수록 왜곡이 더 심한 것을 알 수 있었다. 환자 개개인의 악궁에 맞게 재구성된 파노라마가 일반적으로 사용되는 파노라마 촬영보다 왜곡이 더 감소한다는 것을 알 수 있었다. 또한 파노라마는 전치부에서 구치부로 갈수록 왜곡이 더 심해지는 것을 알 수 있었는데, 이 또한 재구성된 파노라마 영상에서는 왜곡이 감소한다는 것을 알 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.789-792
• /
• 2003

Pipe inspection has a great importance to ensure safety for the nuclear power plant. In this paper, we designed visual inspection module for the tube internal, which diameter is 15${\sim}$20mm. And we made inspection module which consisted of CCD camera and light. And the relation between image and real world coordinate is established. Image processing is performed to calculate mapping parameter and analyze the size of defect. For the calculation of mapping parameter, experiment is performed using grid type test pattern. Acquired image is processed to extract image coordinate. Edge detection, thresholding, median filtering and morphology filtering is applied to extract grid pattern. Extracted image coordinate is used to calculate image to real world mapping. Lens distortion was considered and corrected to get exact data. Coordinate transformation data is provided for the users to recognize easily. Experiment was performed using grid type test pattern, we extracted lens distortion parameter and real coordinate of defect point. Radial distortion of lens was corrected but tangential distortion was not considered. As continuum to this study, the tangential distortion of lens is considered and improvement of analy zing technique for the tube internal be explored continuously.

• 대한공간정보학회지
• /
• 제19권4호
• /
• pp.55-63
• /
• 2011

어안렌즈는 사각이 넓어서 터널 내부 벽면의 영상을 취득하는 데 유용하다. 원통투영의 원리를 이용하여 어안렌즈터널 영상을 우리의 눈에 익숙한 일반 영상으로 변환시킬 수 있는데, 이 과정에서 여러 종류의 왜곡이 발생하게 된다. 본 논문은 투영영상의 터널 바닥면과 벽면 사이 경계선에서 발생하는 왜곡을 다루고 있다. 경계선 왜곡의 발생 원인을 분석하고 모형을 제작하여 보정량 계산식을 유도하였다. Visual C++로 제작한 소프트웨어를 이용하여 계산된 보정량을 투영영상에 적용한 결과 경계선이 보정된 영상을 얻을 수 있었다. 투영영상에 나타난 다른 왜곡에 대한 연구가 추가된다면 어안렌즈 영상을 통해 실제 터널 벽면과 유사한 영상을 얻을 수 있을 것으로 기대된다.