• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.483-486
• /
• 2005

In order to study the effect of strain states on the formation of shear textures during rolling in fcc metals, the evolution of textures was simulated by the full constrain model using various ideal strain states. Considering rolling as a two-dimensional problem, i.e., $\varepsilon_{22}\;=\;\varepsilon_{12}\;=\;\varepsilon_{23}\;=\;0$, the deviation from the plane-strain state manifest itself as nonzero contribution of $\varepsilon_{13}$. With increasing variations of $\varepsilon_{13}$, shear textures develop. The sign of ell hardly affects the evolution of textures. The texture simulation with various idealized strain states indicates that the ratio $\mid\varepsilon_{13}\mid/\mid\varepsilon_{11}\mid$ in each time interval in a roll gap plays a dominant role in the evolution of textures during rolling.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.58-69
• /
• 1995

The present paper is devoted to constructing a numerical algorithm for solving un steady problems on generation, propagation and interaction of nonlinear waves at a surface of ideal fluid, within the framework of the potential-flow model. The numerical scheme is implicit. with non-linearity iteration at every step of time. the finite-difference method with boundary-fitted coordinates are presented in favor for validity and high efficiency of the numerical model developed. Among these arguments, there are the results of calculations of two test problems-on stretching of a liquid ellipse and on wave generation by lifting a portion of a bottom.

• Journal of Korea Water Resources Association
• /
• v.39 no.8 s.169
• /
• pp.703-716
• /
• 2006

The flow duration curves in the present and the ideal hydrologic cycle were derived using SWAT model. The present situation is the landuse and the groundwater withdrawal in the year of 2000 and the ideal situation is the landuse of 1975 and no groundwater withdrawal. These results were compared with the previous instream flow requirements which are the larger flow between the average drought flow and environmental control flow. As a result, the present and ideal drought flows of Ojeoncheon, Hakuicheon, Samseongcheon, and Sammakcheon, were the same and the drought flows of Samseongcheon and Sammakcheon were even zero since the baseflow is very little due to the small and mountainous watersheds. The previous instream flow requirement for the riverine function is also larger than the low flow of the ideal hydrologic cycle. The present method to set the instream flow requirement is not proper for the small mountainous watershed since it can be usually overestimated and drive the artificial measures to secure the streamflow Therefore, another method should be developed such as the low flow and the average flow between the drought flow and the low flow of the ideal hydrologic cycle using the proper hydrologic simulation model such as SWAT which can consider the landuse.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.10
• /
• pp.1689-1696
• /
• 2007

Equilibrium molecular dynamics (EMD) simulations are used to evaluate the transport coefficients of argonkrypton mixtures at two liquid states (state A: 94.4 K and 1 atm; state B: 135 K and 39.5 atm) via modified Green-Kubo formulas. The composition dependency of the volume at state A obeys close to the linear model for ideal liquid mixture, while that at state B differs from the linear model probably due to the high pressure. The radial distribution functions for the Ar-Kr mixture (x = 2/3) show a mixing effect: the first peak of g11 is higher than that of g(r) for pure Ar and the first peak of g22 is lower than that of g(r) for pure Kr. An exponential model of engineering correlation for diffusion coefficient (D) and shear viscosity (η) is superior to the simple linear model for ideal liquid mixtures. All three components of thermal conductivity (λpm, λtm, and λti) at state A and hence the total thermal conductivity decrease with the increase of x. At state B, the change in λtm is dominant over those in λpm and λti, and hence the total thermal conductivity decrease with the increase of x.

• Journal of the Korean housing association
• /
• v.27 no.5
• /
• pp.37-44
• /
• 2016

The purpose of this study is to investigate the relationship of architectural ideology and characteristics of spatial composition between Moisei Ginzburg's Narkomfin communal house and Le Corbusier's Unite d'Habitation. Narkomfin communal house and Unite d'Habitation is considered as example of experiment to construct ideal community housing model. Moisei Ginzburg designed Narkomfin communal house to make typical housing model for socialist city. Meanwhile, Le Corbusier is considered as a leader of modern functionalism architecture. His Unite d'Habitation in Marseille is important experiment for housing model in modern period. Unite d'Habitation is known to be affected by Narkomfin communal house in terms of architectural ideology and its spatial composition. This study focuses on comparative analysis between Narkomfin communal house and Unite d'Habitation through drawings, pictures and various literatures. Narkomfin communal house and Unite d'Habitation have common ideology to realize ideal community housing model. Moreover, both of them have considerable similarities in their spatial composition. First of all, unit housing of Narkomfin and Unite d'Habitation are maisonette type. Secondly, both of them have unique system that one corridor serve two of housing unit. Also, both have common facility such as laundry, childcare which is connected with their housing.

• Journal of the Korea Safety Management & Science
• /
• v.22 no.1
• /
• pp.61-68
• /
• 2020

The purpose of this study was to measure the job aspiration and examine the relationship between that and job satisfaction for wage-earners using the fourth Korean Working Conditions Survey(KWCS). We use the stochastic frontier model for measuring the job aspiration and testing its effect on the job satisfaction. Fstochastic frontier model is introduced to explain that each company potentially produces less than it might due to a degree of job aspiration, measured by decomposing the residuals. In this model framework, it can be regard that the upper bound of the job satisfaction is the ideal frontier, and the bias between the ideal condition and the reality is the job aspiration. If this concept is applicable to the job aspiration, we can measure this bias and investigate a relationship with the job satisfaction. We find that there exists the job aspiration, and it is significantly negatively correlated with the job satisfaction. This result supports that if job aspiration increases, job satisfaction level decreases.

• Korean Journal of Food Science and Technology
• /
• v.22 no.5
• /
• pp.575-581
• /
• 1990

The existence of the equivalent point for a thermal processing system was demonstrated using arbitrarily chosen ideal direct heating curves. i.e. isothermal heating curves at $120^{\circ}C$ for 10min and at $135^{\circ}C$ for 10sec. Under these conditions, G-values and F-values were calculated at various values of Ea- and z-values by applying the Arrhenius and the Bigelow models respectively. The equivalent time and equivalent temperature were determined by both line intersection and linear regression methods. The equivalent points estimated by both the line intersection and the linear regression methods were consistent and their values were the same as the heating time and temperature of the ideal direct heating curves.

• Archives of Plastic Surgery
• /
• v.50 no.4
• /
• pp.340-347
• /
• 2023

Background Though in facial plastic surgery, the ideal nasal characteristics are defined by average European-American facial features known as neoclassical cannons, many ethnicities do not perceive these characteristics as suitable. Methods To investigate the preferences for nasofrontal angle, nasolabial angle, dorsal height, alar width, and nasal tip projection, manipulated pictures of one male and one female model were shown to 203 volunteer patients from a tertiary university hospital's facial plastic clinic. Results The most aesthetically preferred nasofrontal angles were 137.64 ± 4.20 degrees for males and 133.55 ± 4.53 degrees for females. Acute nasofrontal angles were more desirable in participants aged 25 to 44. The most preferred nasolabial angles were 107.56 ± 5.20 degrees and 98.92 ± 4.88 degrees, respectively. Volunteers aged 19 to 24 preferred more acute male nasolabial angles. A straight dorsum was the most desirable in both genders (0.03 ± 0.78 and 0.26 ± 0.75 mm, respectively). The ideal male and female alar widths were -0.51 ± 2.26 and -1.09 ± 2.18 mm, respectively. More 45- to 64-year-old volunteers preferred alar widths equal to intercanthal distance. The ideal female and male tip projections were 0.57 ± 0.01 and 0.56 ± 0.01, respectively. Conclusion Results indicate that the general Iranian patients prefer thinner female noses with wider nasofrontal angles for both genders. However, the ideal nasolabial angles, dorsal heights, and tip projections were consistent with the neoclassical cannons. Besides ethnic differences, the trend of nasal beauty is also affected by gender, age, and prior history of aesthetic surgery.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.4
• /
• pp.415-423
• /
• 2009

To investigate low frequency acoustic transmissions in the Sub-Polar Front(SPF) of the East Sea, numerical experiments are conducted with Range dependent Acoustic Model(RAM) using Circulation Research of the East Asian Marginal Seas(CREAMS) data and Autonomous Profiling Explorer(APEX)) data. Significant seasonal variations of sea water properties are existed across the Sub-Polar Front(SPF) region from the north and the south. The model results show that Transmission Loss(TL) decrease(about 20dB) with ideal front in the warm region whereas TL increase(about 25dB) with ideal front in the cold region. Regardless of season(both in summer and winter), when the sound source is located in the cold region of the SPF, the model results show weak TL, compared to the case of the source in the warm region(Maximum difference of TL reaches 28dB). This difference between the cases when the source is located in the cold region and the warm region, is accounted for from the different vertical profiles of sound speed in both regions.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.656-663
• /
• 1990

To investigate the optimum design conditions of Stirling Engines at the preliminary design stage, comparative study between adoabatoc analysis based on an approximate analytical solution to the Ideal Adiabatic Model and the existing isothermal analysis has been carried out. The optimum phase angle obtained from adiabatic analysis to achieve the maximum work with given combination of design parameters is greater than that from isothermal analysis, while the optimum swept volume ratio is smaller. Effect of variation in the temperature ratio on the work parameter is proved to be stronger in adiabatic analysis. On the contrary, the work parameter by adiabatic analysis is less sensitive to a change in the dead volume ratio. Especially in adiabatic analysis there exists the optimum dead volume ratio maximizing the work parameter, which may provide a lower limit of it. Considering that the adiabatic model is more reasonable, signifiant differences between two methods lead to the conclusion that adiabatic analysis is preferable to isothermal one for the preliminary design of Stirling Engines.