• 한국수자원학회논문집
• /
• 제30권5호
• /
• pp.423-430
• /
• 1997

수자원개발 계획과 설계를 위한 설계홍수량 추정에 가장 중요한 문제의 하나가 유효우량 추정이다. 우리나라 수공구조물의 설계홍수량 추정에는 미국 SCS에서 개발한 유출곡선번호(curve number)로부터 유효우량을 추정하고 홍수도달시간을 고려하여 단위도를 합성하는 방법이 자주 사용되고 있다. 그러나, 우리나라의 경우 시간별 강우-유출량 자료가 충분하지 못한 상태이므로 SCS 유출곡선번호 방법을 그대로 적용하여 유효우량을 추정할 때에는 신중을 기해야 한다. 왜냐하면 우리나라의 토양, 식생 토지이용, 배수조건 등의 유출특성이 미국 유역의 유출특성과 다르고 특히 논이라는 독특한 토이이용형태가 13%나 차지하고 있기 때문이다. 이에 본 연구에서는 유역이 가장 건조한 상태의 유출곡선번호 CN-I을 SCS 유출곡선번호에서 구하지 않고 강우-유출모형인 DAWAST(DAily WAtershed STreamflow, 김태철, 1992) 모형의 유역 최대잠재저류능인 Umax로부터 구하는 방법을 제시하였다. 이매개변수 Umax는 우리나라 유역에서 관측된 일별 강우-유출량 자료를 최적화 기법으로 보정하여 구했으므로 이로부터 추정된 유출곡선번호는 우리나라의 유역특성이 반영되었다고 볼 수 있다.

• Nuclear Engineering and Technology
• /
• 제40권4호
• /
• pp.255-268
• /
• 2008

The greater demand for electricity and the available capacity within safety margins in some operating NPPs are prompting nuclear utilities to request license modification to enable operation at a higher power level, beyond their original license provisions. Such plant modifications require an in-depth safety analysis to evaluate the possible safety impact. The analysis must consider the thermo hydraulic, radiological and structural aspects, and the plant behavior, while taking into account the capability of the structures, systems and components, and the reactor protection and safeguard systems set points. The purpose of this paper is to introduce international experiences and approaches for implementation of power uprates related to the reactor thermal power of nuclear power plants. The paper is intended to give the reader a general overview of the major processes, work products, issues, challenges, events, and experiences in the power uprates program. The process of increasing the licensed power level of a nuclear power plants is called a power uprate. One way of increasing the thermal output from a reactor is to increase the amount of fissile material in use. It is also possible to increase the core power by increasing the performance of the high power bundles. Safety margins can be maintained by either using fuels with a higher performance, or through the use of improved methods of analysis to demonstrate that the required margins are retained even at the higher power levels. The paper will review all types of power uprates, from small to large, and across various reactor types, including light and heavy water, pressurized, and boiling water reactors. Generally, however, the content of the report focuses on power uprates of the stretch and extended type. The International Atomic Energy Agency (IAEA) is developing a technical guideline on power uprates and side effects of power uprates in nuclear power plants.

• 한국토양비료학회지
• /
• 제43권6호
• /
• pp.782-788
• /
• 2010

Detail management standard on soil conditions in 'Kyoho' grapes were not yet made. Therefore, this study was carried out to investigate the optimum soil environmental conditions on production of high fruit quality in 'Kyoho' grapes. We established using correlation between fruit quality and soil condition. These results were used to develop soil management guideline with promoting efficiency and minuteness in grape vineyard. Soil conditions were analyzed at total 80 vineyards in major grape producing areas such as Ansung, and Cheonan (40 orchards an area). The soil environmental factors affected fruit weight were soil pH of 36.6%, cultivation layer depth of 23.3%, and cation of 17.8%. The soil condition factors affected sugar content were soil hardness of 24.4%, cation of 24.1% and organic matter content of 22.1%. Cultivation layer depth, soil texture, and phosphate content were low as relative contribution. Coloring was involved with organic matter content, CEC (cation exchange capacity), and saturated hydraulic conductivity. while soil pH, cultivation layer depth, and phosphate content showed low contribution. Finally, relative contribution on fruit quality related with sugar content, fruit weight, and coloring were soil hardness of 28.0%, organic matter content of 25.0%, soil pH of 12.9%.

• Membrane and Water Treatment
• /
• 제10권1호
• /
• pp.91-97
• /
• 2019

Application of bioretention systems in Korea is highly considered due to its minimal space requirements, appropriateness as small landscape areas and good pollutant removal and peak hydraulic flow reduction efficiency. In this study, the efficiency of two lab-scale bioretention types having different physical properties, media configuration and planted with different shrubs and perennials was investigated in reducing heavy metal pollutants in stormwater runoff. Type A bioretention systems were planted with shrubs whereas type B were planted with perennials. Chrysanthemum zawadskii var. latilobum (A-CL) and Aquilegia flabellata var. pumila (A-AP) respectively were planted in each type A bioretention reactors while Rhododendron indicum linnaeus (B-RL) and Spiraea japonica (B-SJ), respectively were planted in each type B bioretention reactors. Results revealed that the four lab-scale bioretention reactors significantly reduced the influent total suspended load by about 89 to 94% (p<0.01). Type B-RL and B-SJ reactors reduced soluble Cr, Cu, Zn, and Pb by 28 to 45% that were 15 to 35% greater than the soluble metal reduction of type A-CL and A-AP reactors, respectively. Among the pollutants, total Cr attained the greatest discharged fraction of 0.52-0.81. Excluding the effect of soil media, total Pb attained the greatest retention fraction in the bioretention systems amounting to 0.15-0.34. Considering the least discharge fraction of heavy metal in the bioretention system, it was observed that the bioretention systems achieved effectual reduction in terms of total Cu, Zn and Pb. These findings were associated with the poor adsorption capacity of the soil used in each bioretention system. The results of this study may be used for estimating the maintenance requirements of bioretention systems.

• 대한조선학회논문집
• /
• 제56권2호
• /
• pp.175-186
• /
• 2019

Number of studies on the buckling of thin cylindrical pressure vessels, such as submarine pressure hull and pipe with a large ratio of diameter/thickness, have been carried out in the naval and ocean engineering. However, research about thick cylinder pressure vessel has not been active except for the specific application in nuclear area. There are not many papers for the estimation of buckling and ultimate load capacity of thick cylinders for the deep sea usage. Thus, it is important to understand the theoretical bases of the buckling and collapse process and the derivation process of such loads for the proper design and structural analysis. The objective of this study is to survey the collapse behavior, to analyse and clarify the derivation procedure and to estimate the ultimate collapse load for thick cylinder by analyzing relevant books and papers. It is found that the yielding begins at the internal surface of the thick cylinder and plasticity develops from the internal surface to the external surface to generate collapse. Also the initial imperfection of cylinder develops flattening and consequently accelerates buckling and finally ultimate collapse. By comparing the collapse loads of aluminum thick cylinder by applying equations herein, it is shown that the equations analyzed are appropriate to obtain collapse load for thick cylinder.

• 한국수처리학회지
• /
• 제26권6호
• /
• pp.3-12
• /
• 2018

The objective of this study was to evaluate the radius of influence of effluent of water treatment system developed for the purpose of improvement of reservoir water quality using fluorescent dye (Rhodamine-WT) tracer experiment and 3-D numerical model. The tracer experiment was carried out in a medium-sized agricultural reservoir with a storage capacity of $227,000m^3$ and an average depth of 1.6 m. A guideline with a total length of 160 m was installed at intervals of 10 m in the horizontal direction from the discharge part, and a Rhodamine measurement sensor (YSI 6130, measurement range $0-200{\mu}g/L$) was used to measure concentration changes in time, distance, and depth. Experimental design was established in advance through Jet theory and the diffusion process was simulated using ELCOM, a three dimensional hydraulic dynamics model. As a result of the study, the direct effect radius of the jet emitted from the applied water treatment system was about 50-70 m, and the radius of physical effect by the advection diffusion was judged to be 100-120 m. The numerical simulations of effluent advection-diffusion of the water treatment system using ELCOM showed very similar results to those of the impact radius analysis using the tracer experiment and jet flow empirical equations. The results provide valuable information on the spatial extent of the water quality improvement devices installed in the reservoir and the facility layout design.

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.665-675
• /
• 2022

The safety problems of giant hydraulic structures such as dams caused by terrorist attacks, earthquakes, and wars often have an important impact on a country's economy and people's livelihood. For the national defense department, timely and effective assessment of damage to or impending damage to dams and other structures is an important issue related to the safety of people's lives and property. In the field of damage assessment and vulnerability analysis, it is usually necessary to give the damage assessment results within a few minutes to determine the physical damage (crack length, crater size, etc.) and functional damage (decreased power generation capacity, dam stability descent, etc.), so that other defense and security departments can take corresponding measures to control potential other hazards. Although traditional numerical calculation methods can accurately calculate the crack length and crater size under certain combat conditions, it usually takes a long time and is not suitable for rapid damage assessment. In order to solve similar problems, this article combines simulation calculation methods with machine learning technology interdisciplinary. First, the common concrete gravity dam shape was selected as the simulation calculation object, and XFEM (Extended Finite Element Method) was used to simulate and calculate 19 cracks with different initial positions. Then, an LSTM (Long-Short Term Memory) machine learning model was established. 15 crack paths were selected as the training set and others were set for test. At last, the LSTM model was trained by the training set, and the prediction results on the crack path were compared with the test set. The results show that this method can be used to predict the crack propagation path rapidly and accurately. In general, this article explores the application of machine learning related technologies in the field of mechanics. It has broad application prospects in the fields of damage assessment and vulnerability analysis.

• Geomechanics and Engineering
• /
• 제27권6호
• /
• pp.537-550
• /
• 2021

There are various technical problems need to be solved in the construction process of pre-setting an isolation wall into a double lane in the outburst prone mine. This study presents a methodology that pre-setting an isolation wall into a double lane without a coal pillar. This requires the excavation of two small section roadways to dig a wide section roadway, followed by construction of the separation wall. During this process the connecting lane is reserved. In order to ensure the stability of the separation wall, the required bearing capacity of the isolation wall is 4.66 MN/m and the deformation of the isolation wall is approximately 25 cm. To reduce the difficulty of implementing support the roadway is driven by 5 m/d. After the construction of the separation wall, the left side coal wall is brushed 1.5 m to make the width of the gas roadway reach 2.5 m and the roadway support utilizes anchor rod, ladder beam, anchor cable beam and net configuration. During construction, the concrete pump and removable self-propelled hydraulic wall mold are used to pump and pour the concrete of the isolation wall. In the process of mining, the stress distribution of coal body and isolation wall is detected and measured on site. The results demonstrate that the deformation of the surrounding rock of roadway and separation of roof in the roadway is small. The stress of the bolt and anchor cable is within equipment tolerance validating their selection. The roadway is well supported and the intended goal is achieved. The methodology can be used for reference for similar mine gas control.

• 한국지반공학회논문집
• /
• 제38권9호
• /
• pp.53-67
• /
• 2022

마이크로파일은 소구경 현장타설말뚝으로, 시공방법이 간단하고 공사비용이 상대적으로 저렴하여 건축물을 비롯한 각종 구조물의 보수보강 및 증축 시 기초보강 등에 활용되고 있다. 시공이 용이하고 간단한 메커니즘의 구조체를 선단에 장착하여 지지력을 증대시키는 선단 확장형 마이크로파일이 개발되었으며, 이에 대한 수치해석, 내구성시험, 원심모형시험 등의 연구가 수행되어 왔다. 본 연구에서는, 기존에 수행된 수치모델링을 고도화하여 연직하중 재하에 의해 연결강봉 근입 시 고정 지압구가 활착되는 거동 메커니즘을 확인하고, 원심모형실험과 동일한 조건에서의 수치해석을 수행하여 그 결과를 비교하였다. 또한, Lab-scale 수치해석 결과를 바탕으로 고정 지압구의 형상 개선안을 도출하고, Field-scale 수치해석을 통해 일반 마이크로파일 대비 지지력 증대효과를 비교·검증하였다.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4134-4145
• /
• 2022

The collimator is one of the high-heat-flux components used to avoid a series of vacuum and thermal problems. In this paper, the heat load distribution throughout the collimator is first calculated through experimental data, and a transient thermodynamic simulation analysis of the original model is carried out. The error of the pipe outlet temperature between the simulated and experimental values is 1.632%, indicating that the simulation result is reliable. Second, the model is optimized to improve the heat transfer performance of the collimator, including the contact mode between the pipe and the flange, the pipe material and the addition of a twisted tape in the pipe. It is concluded that the convective heat transfer coefficient of the optimized model is increased by 15.381% and the maximum wall temperature is reduced by 16.415%; thus, the heat transfer capacity of the optimized model is effectively improved. Third, to adapt the long-pulse steady-state operation of the experimental advanced superconducting Tokamak (EAST) in the future, steady-state simulations of the original and optimized collimators are carried out. The results show that the maximum temperature of the optimized model is reduced by 37.864% compared with that of the original model. The optimized model was changed as little as possible to obtain a better heat exchange structure on the premise of ensuring the consumption of the same mass flow rate of water so that the collimator can adapt to operational environments with higher heat fluxes and long pulses in the future. These research methods also provide a reference for the future design of components under high-energy and long-pulse operational conditions.