Browse > Article
http://dx.doi.org/10.3744/SNAK.2019.56.2.175

The Analysis of Collapse Load of Thick Pressure Cylinder under External Hydrostatic Pressure  

Lee, Jae-Hwan (Naval Architecture and Ocean Engineering, Chungnam National University)
Park, Byoungjae (Korea Research Institute of Ships and Ocean Engineering (KRISO))
Publication Information
Journal of the Society of Naval Architects of Korea / v.56, no.2, 2019 , pp. 175-186 More about this Journal
Abstract
Number of studies on the buckling of thin cylindrical pressure vessels, such as submarine pressure hull and pipe with a large ratio of diameter/thickness, have been carried out in the naval and ocean engineering. However, research about thick cylinder pressure vessel has not been active except for the specific application in nuclear area. There are not many papers for the estimation of buckling and ultimate load capacity of thick cylinders for the deep sea usage. Thus, it is important to understand the theoretical bases of the buckling and collapse process and the derivation process of such loads for the proper design and structural analysis. The objective of this study is to survey the collapse behavior, to analyse and clarify the derivation procedure and to estimate the ultimate collapse load for thick cylinder by analyzing relevant books and papers. It is found that the yielding begins at the internal surface of the thick cylinder and plasticity develops from the internal surface to the external surface to generate collapse. Also the initial imperfection of cylinder develops flattening and consequently accelerates buckling and finally ultimate collapse. By comparing the collapse loads of aluminum thick cylinder by applying equations herein, it is shown that the equations analyzed are appropriate to obtain collapse load for thick cylinder.
Keywords
Thick cylinder; Pressure vessel; External pressure; Hydraulic pressure; Buckling load; Collapse load; Ovality; Imperfection;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 ASME BPVC (Boiler and Pressure Vessel Code) 2010. Section VIII, Division 1; Rules for Construction of Pressure Vessels.
2 Bickell M., & Ruiz, B. C., 1967. Pressure Vessel Design and Analysis, Macmillan Education.
3 Choi, H-J. Lee, J-H., Kim, J-M., Lee, S-G., & Maring, K., 2016. The Design, Structural Analysis and High Pressure Chamber Test of a Thick Pressure Cylinder for 2000 m Water Depth. Journal of the Society of Naval Architects of Korea, 53(2), pp.144-153.   DOI
4 Corradi, L., Cammi, A., & Luzzi, L., 2011. Collapse Behavior of Moderately Thick Tubes Pressurized from Outside. Nuclear Power - Control, Reliability and Human Factors, Chapter 14, pp.257-274.
5 Corradi, L.., Marcell, V.D., Luzzi, L., & Trudi, F., 2009. A numerical assessment of the load bearing capacity of externally pressurized moderately thick tubes. International Journal of Pressure vessels and Piping, 86, pp.525-532.   DOI
6 Harvey, J.F., 1991. Theory and Design of Pressure Vessels. Van Nostrand Reinhold.
7 Kardomateas, G.A., 1993. Buckling of thick orthotropic cylindrical shells under external pressure. Journal of Applied Mechanics-Transactions of ASME 60, pp.195-202.   DOI
8 Kardomateas, G.A., 2000. Effect of normal strains in buckling of thick orthotropic shells. Journal of Aerospace Engineering, 13(3), pp.85-91.   DOI
9 Kim, H., Shin, Y., Kim, S., Shin S., Chung, B., Jo, J., & Kim, H., 2012. Structural design of small submarine pressure hull. Journal of the Society of Naval Architects of Korea, 49(2), pp.116-123.   DOI
10 Koiter, W.T., 1960. General theorems of elastic plastic solids mechanics, 1, North-Holland, Amsterdam, pp.65-221.
11 Marin J., & Weng, T-L, 1963, Strength of thick-walled cylindrical pressure vessels. Journal of Engineering for Industry, Nov. pp.405-415.   DOI
12 Nho, I., Ryu, J., Lim., S.., Cho, S., & Cho, Y., 2017. Buckling analysis of circular cylinders with initial imperfection subjected to hydraulic pressure. Journal of the Society of Naval Architects of Korea, 54(3), pp.267-273.   DOI
13 Papadakis, G. 2008. Buckling of thick cylindrical shells under external pressure. International Journal of Solids and Structures, 45, pp.5308-5321.   DOI
14 Ross, C.T.F., 1990, Pressure vessels under external pressure: statics and dynamics, Elsevier Applied Science.
15 Sadowski A.J. & Rotter, J.M., 2013. Solid or shell finite elements to model thick cylindrical tubes and shells under global bending. International Journal of Mechanical Sciences, 74, pp.143-153.   DOI
16 Simonen, F.A. & Shippell, R..J. Jr., 1982. Collapse of thick-walled cylinders under external pressure. Experimental Mechanics, pp.41-48.
17 Timoshenko, S.P., & Gere, J.M., 1961. Theory of elastic stability. McGraw-Hill Book Company.
18 Voyiadjis, G.Z., & Baluch, M.H., 1981. Refined theory for flexural motions of isotropic elastic plates. Journal of Sound and Vibration. 76(1), pp.57-64.   DOI
19 Kardomateas, G.A., & Philobos, M.S., 1995. Buckling of thick orthotropic cylindrical shells under combined external pressure and axial compression. AIAA., 33(10), pp.1946-1953.   DOI
20 Voyiadjis, G.Z., & Shi, G., 1991. A refined two-dimensional theory for thick cylindrical shells. International Journal of Solids and Structures. 27(3), pp.261-282.   DOI
21 Voyiadjis, G.Z., & Woelke, P., 2004. A refined theory for thick spherical shells. International Journal of Solids and Structures. 41, pp.3747-3769.   DOI
22 Yoo, Y., Huh, N., Choi, Su., Kim, T., & Kim, J., 2010. Collapse pressure estimates and the application of a partial safety factor to cylinders subject to experimental pressure. Nuclear Engineering and Technology. 42(4), pp.450-459.   DOI