Browse > Article
http://dx.doi.org/10.12989/gae.2021.27.6.537

Research on no coal pillar protection technology in a double lane with pre-set isolation wall  

Liu, Hui (Key Laboratory of Gas and Fire Control for Coal Mines, Ministry of Education, China University of Mining and Technology)
Li, Xuelong (Mine Disaster Prevention and Control-Ministry of State Key Laboratory Breeding Base, Shandong University of Science and Technology)
Gao Xin (College of Energy and Mining Engineering, Shandong University of Science and Technology)
Long, Kun (State Key Laboratory of Coal Mine Disaster Dynamics and Control, College of Resource and Safety Engineering, Chongqing University)
Chen, Peng (School of Safety Engineering, North China Institute of Science & Technology)
Publication Information
Geomechanics and Engineering / v.27, no.6, 2021 , pp. 537-550 More about this Journal
Abstract
There are various technical problems need to be solved in the construction process of pre-setting an isolation wall into a double lane in the outburst prone mine. This study presents a methodology that pre-setting an isolation wall into a double lane without a coal pillar. This requires the excavation of two small section roadways to dig a wide section roadway, followed by construction of the separation wall. During this process the connecting lane is reserved. In order to ensure the stability of the separation wall, the required bearing capacity of the isolation wall is 4.66 MN/m and the deformation of the isolation wall is approximately 25 cm. To reduce the difficulty of implementing support the roadway is driven by 5 m/d. After the construction of the separation wall, the left side coal wall is brushed 1.5 m to make the width of the gas roadway reach 2.5 m and the roadway support utilizes anchor rod, ladder beam, anchor cable beam and net configuration. During construction, the concrete pump and removable self-propelled hydraulic wall mold are used to pump and pour the concrete of the isolation wall. In the process of mining, the stress distribution of coal body and isolation wall is detected and measured on site. The results demonstrate that the deformation of the surrounding rock of roadway and separation of roof in the roadway is small. The stress of the bolt and anchor cable is within equipment tolerance validating their selection. The roadway is well supported and the intended goal is achieved. The methodology can be used for reference for similar mine gas control.
Keywords
double lane with pre-set isolation wall; high gas mine; mining monitor; roadway protection without coal pillar;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Zhang, Z.B., Wang, E.Y., Liu, X.N., Zhang, Y., Li, S., Khan, M. and Gao, Y. (2021), "Anisotropic characteristics of ultrasonic transmission velocities and stress inversion during uniaxial compression process", J. Appl. Geophys., 186, 104274. https://doi.org/10.1016/j.jappgeo.2021.104274.   DOI
2 Sander, R. and Connell, L.D. (2012), "Methodology for the economic assessment of enhanced coal mine methane drainage (ECMM) as a fugitive emissions reduction strategy", International J. Greenhouse Gas Control, 8, 34-44. https://doi.org/10.1016/j.ijggc.2012.01.009.,   DOI
3 Chen, K., Song, M. and Wei, W. (2018), "Structure optimization of parallel air-cooled battery thermal management system with Utype flow for cooling efficiency improvement", Energy, 145(2), 603-613. https://doi.org/10.1016/j.energy.2017.12.110.   DOI
4 Cheng, S., Ma, Z. and Gong, P. (2020), "Controlling the deformation of a small coal pillar retaining roadway by non-penetrating directional pre-splitting blasting with a deep hole: A case study in Wangzhuang coal mine", Energies, 13(12), 3084. https://doi.org/10.3390/en13123084.   DOI
5 Diller, David, E. and Shuck, T. (2015), "Estimation and interpretation of high-confidence microseismic source mechanisms", Leading Edge, 34.8, 918-924. https://doi.org/10.1190/tle34080918.1.   DOI
6 Bai, Q.S., Tu, S.H. and Zhang, C. (2016), "Discrete element modeling of progressive failure in a wide coal roadway from water-rich roofs", Int. J. Coal Geology, 167, 215-229. https://doi.org/10.1016/j.coal.2016.10.010.   DOI
7 Guo, W., Wang, H. and Chen, S. (2016), "Coal pillar safety and surface deformation characteristics of wide strip pillar mining in deep mine", Arabian J. Geosci., 9(2), 1-9. https://doi.org/10.1007/s12517-015-2233-5.   DOI
8 Hu, S.B., Pang, S.G. and Yan, Z.Y. (2019), "A new dynamic fracturing method: deflagration fracturing technology with carbon dioxide", Int. J. Fracture, 220(1), 99-111. https://doi.org/10.1007/s10704-019-00403-8.   DOI
9 Kong, X.G., Wang, E.Y. and Li, S.G. (2019), "Dynamic mechanical characteristics and fracture mechanism of gas-bearing coal based on SHPB experiments", Theor. Appl. Fract. Mech., 105, 102395. https://doi.org/10.1016/j.tafmec.2019.102395.   DOI
10 Yan, H., Zhang, J.X. and Li, L.Y. (2018), "Prediction of upper limit position of bedding separation overlying a coal roadway within an extra-thick coal seam", J. Central South Univ., 25(2), 448-460. https://doi.org/10.1007/s11771-018-3749-0.   DOI
11 Yang, X.L., Wen, G.C. and Dai, L.C. (2019), "Ground subsidence and surface cracks evolution from shallow-buried close-distance multi-seam mining: A case study in Bulianta coal mine", Rock Mech. Rock Eng., 52(8), 2835-2852. https://doi.org/10.1007/s00603-018-1726-4.   DOI
12 Zhang, C.L., Xu, J. and Yin, G.Z. (2019), "A novel large-scale multifunctional apparatus to study the disaster dynamics and gas flow mechanism in coal mines", Rock Mech. Rock Eng., 52(2), 2889-2898. https://doi.org/10.1007/s00603-018-1610-2.   DOI
13 Zhang, R., Liu, J. and Sa, Z.Y. (2020), "Fractal characteristics of acoustic emission of gas-bearing coal subjected to true triaxial loading", Measurement, https://doi.org/10.1016/j.measurement.2020.108349.   DOI
14 Wang, C., Song, D.Z., Zhang, C.L., Liu, L., Zhou, Z.H. and Huang, X.C. (2019), "Research on the classification model of coal's bursting liability based on database with large samples", Arabian J. Geosci., 12(13), 411 https://doi.org/10.1007/s12517-019-4562-2.   DOI
15 Tinnea, R., Tinnea, J. and Kuder, K. (2016), "High-early-strength, high-resistivity concrete for direct-current light rail", J. Mater. Civil Eng., 29(4), 04016260. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001812.   DOI
16 Najafi, M., Jalali, S.E. and Bafghi, A.R.Y. (2011), "Prediction of the confidence interval for stability analysis of chain pillars in coal mines", Saf. Sci., 49(5), 651-657. https://doi.org/10.1016/j.ssci.2010.11.005.   DOI
17 Rezaei M., Hossaini, M.F. and Majdi, A. (2015), "Determination of Longwall Mining-Induced Stress Using the Strain Energy Method", Rock Mech. Rock Eng., 48(6), 2421-2433. https://doi.org/10.1007/s00603-014-0704-8.   DOI
18 Shen, W.L., Wang, M. and Cao, Z.Z. (2019), "Mining-induced failure criteria of interactional hard roof structures: A case study", Energies, 12, 3016:1-17. https://doi.org/10.3390/en12153016.   DOI
19 Soares, C.G. and Cherneva, Z. (2005), "Spectrogram analysis of the time-frequency characteristics of ocean wind waves", Ocean Eng., 2005, 32(14-15), 1643-1663. https://doi.org/10.1109/ECTC.2013.6575605.   DOI
20 Song, Z. (2015), "A new method to improve operating performance for underground hard rock mining with new scheduling, controlling and forecasting techniques", IEEE T. Magn., 33(5), 4113-4115. https://doi.org/10.1109/20.619680.
21 Tiskumara, R., Joshi, R.P. and Mauch, D. (2015), "Analysis of high field effects on the steady-state current-voltage response of semi-insulating 4h-sic for photoconductive switch applications", J. Appl. Phys., 118(9), 1732-G193. https://doi.org/10.1063/1.4929809.   DOI
22 Zhou, C., Jiang, F. and Xu, D. (2020), "A calculation model to predict the impact stress field and depth of plastic deformation zone of additive manufactured parts in the process of ultrasonic impact treatment", J. Mater. Process. Technol., 280, 116599. https://doi.org/10.1016/j.jmatprotec.2020.116599.   DOI
23 Feng, J.J., Wang, E.Y. and Huang, Q.S. (2020), "Study on coal fractography under dynamic impact loading based on multifractal method", Fractals, 28(1), 2050006. https://doi.org/10.1142/S0218348X20500061.   DOI
24 Vladimir, M. Anastasia, M. and Shevtsov, B. (2017), "Application of sensor signal analysis network complex for distributed, time synchronized analysis of electromagnetic radiation", E3s Web of Conferences, 20, 02010. https://doi.org/10.1051/e3sconf/20172002010.
25 Brunschwiler, T., Madhour, Y. and Tick, T. (2013), "Investigation of novel solder patterns for power delivery and heat removal support", Electronic Components & Technology Conference, IEEE. https://doi.org/10.1109/ECTC.2013.6575605.
26 Li, X.L., Chen, S.J. and Zhang, Q.M. (2021), "Research on theory, simulation and measurement of stress behavior under regenerated roof condition", Geomech. Eng., 26(1), 49-61. https://doi.org/10.12989/gae.2021.26.1.049.   DOI
27 Li, X.L., Cao, Z.Y. and Xu, Y.L. (2020), "Characteristics and trends of coal mine safety development", Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-14. https://doi.org/10.1080/15567036.2020.1852339.   DOI
28 Li, X.L., Chen, S.J. and Li, Z.H. (2021), "Rockburst mechanism in coal rock with structural surface and the microseismic (MS) and electromagnetic radiation (EMR) response", Eng. Fail. Anal., 124(6), 105396. https://doi.org/10.1016/j.engfailanal.2021.105396.   DOI
29 Li, X.L., Chen, S.J. and Liu, S.M. (2021), "AE waveform characteristics of rock mass under uniaxial loading based on Hilbert-Huang transform", J. Central South Univ., 28(6), 1843-1856. https://doi.org/10.1007/s11771-021-4734-6.   DOI
30 Zhang, X., He, M. and Yang, J. (2020), "An innovative non-pillar coal-mining technology with automatically formed entry: A case study", Engineering, https://doi.org/10.1016/j.eng.2020.01.014.   DOI
31 Wang, S.F., Li, X.B. and Yao, J. (2019), "Experimental investigation of rock breakage by a conical pick and its application to non-explosive mechanized mining in deep hard rock", Int. J. Rock Mech. Min. Sci., 122, 104063. https://doi.org/10.1016/j.ijrmms.2019.104063.   DOI
32 Wang, X., Bai, J. and Wang, R. (2015), "Bearing characteristics of coal pillars based on modified limit equilibrium theory", Int. J. Min. Sci. Technol., 25(6), 943-947. https://doi.org/10.1016/j.ijmst.2015.09.010.   DOI
33 Wang, X., Yuan, W. and Yan, Y. (2020b), "Scale effect of mechanical properties of jointed rock mass: A numerical study based on particle flow code", Geomech. Eng., 21(3), 259-268. https://doi.org/10.12989/gae.2020.21.3.259.   DOI
34 Wohlford, A., Ravindran, S. and Kidane, A. (2019), "Energy absorption characteristics of graded foams subjected to high velocity loading: Proceedings of the 2018 annual conference on experimental and applied mechanics", Dynam. Behavior of Mater., 1, 229-232. https://doi.org/10.1007/978-3-319-95089-1_41.   DOI
35 Zhu, G.L., Sousa, R.L. and He, M.C. (2020), "Stability analysis of a non-pillar-mining approach using a combination of discrete fracture network and discrete-element method modeling", Rock Mech. Rock Eng., 53(1), 269-289. https://doi.org/10.1007/s00603-019-01901-w.   DOI
36 Zou, Q., Liu, H. and Cheng, Z. (2020), "Effect of slot inclination angle and borehole-slot ratio on mechanical property of pre-cracked coal: Implications for ECBM recovery using hydraulic slotting", Nat. Resour. Res., 29(3), 1705-1729. https://doi.org/10.1007/s11053-019-09544-y.   DOI
37 Liu, S.M., Li, X.L. and Wang, D.K. (2021), "Experimental study on temperature response of different ranks of coal to liquid nitrogen soaking", Nat. Resour. Res., 32(2), 1467-1480. https://doi.org/10.1007/s11053-020-09768-3.   DOI
38 Wang, Q., Feng, J.J. and Yan, P.Y. (2011), "An explanation for the negative effect of elevated temperature at early ages on the late-age strength of concrete", J. Mater. Sci., 46(22), 7279-7288. https://doi.org/10.1007/s10853-011-5689-z.   DOI
39 Singh, R., Singh, A.K. and Maiti, J. (2011), "An observational approach for assessment of dynamic loading during underground coal pillar extraction", Int. J. Rock Mech. Min.ences, 48(5), 794-804. https://doi.org/10.1016/j.ijrmms.2011.04.003.   DOI
40 Wu, N., Liang, Z.Z. and Zhou, J.R. (2020), "Energy evolution characteristics of coal specimens with preformed holes under uniaxial compression", Geomech. Eng., 20(1), 55-66. https://doi.org/10.12989/gae.2020.20.1.055.   DOI
41 Pokharel, F.M. (2010), "Coupled effects of sulphate and temperature on the strength development of cemented tailings backfills: Portland cement-paste backfill", Cement Concrete Compos., 32(10), 819-828. https://doi.org/10.1016/j.cemconcomp.2010.08.002.   DOI
42 Lobanova, T., Lindin, G. and Trofimova, O. (2017), "Rock mass diagnostics based on microseismic monitoring data at sheregesh deposit", Proceedings of the IOP Conference Series Earth and Environmental ence, 53, 012006. https://doi.org/10.1088/1755-1315/53/1/012006.
43 Mahdi, A., Shakibaeinia, A. and Dibike, Y.B. (2020), "Numerical modelling of oil-sands tailings dam breach runout and overland flow", The Science of the Total Environment, 703(PT.2),134568.1-134568.10. https://doi.org/10.1016/j.scitotenv.2019.134568   DOI
44 Mcclung, R.C. (2010), "Crack closure and plastic zone sizes in fatigue. Fatigue & Fracture of Engineering", Mater. Struct., 14(4), 455-468. https://doi.org/10.1111/j.1460-2695.1991.tb00674.x.   DOI
45 Qin, Y., Liang, J. and Huang, Z. (2016), "Painting the roadway embankment with non-white high reflective pigments to raise the albedo", Environ. Earth Sci., 75(4), 1-7. https://doi.org/10.1007/s12665-016-5273-6.   DOI
46 Rezagholilou, A., Nikraz, H. and Green, P.P. (2015), "Effects of nano-silica on cement-fly ash modified crushed rocks base materials", 2(1), 1-6. https://doi.org/10.15436/2377-1372.15.007.   DOI
47 Singh, R., Mandal, P.K. and Singh, A.K. (2011), "Coal pillar extraction at deep cover: With special reference to Indian coalfields", Int. J. Coal Geology, 86(2-3), 276-288. https://doi.org/10.1016/j.coal.2011.03.003   DOI