• The Korean Journal of Ecology
• /
• v.20 no.4
• /
• pp.239-244
• /
• 1997

Hybrid poplar (Populus trichocarpa $\times$ P. deltoides) clones were fumigated with ozone. Fumigation was applied for 6 to 8 hours each day for approximately 3 months at ozone concentrations of 0.090 to 0.115 ppm using by open-top chambers. Growth and biomass of hybrid poplar seedlings were reduced by ozone exposure. Mean percentage of falling leaves in ozone-treated plant was 6 times higher than that of charcoal-filtered plant. Among physiological responses, rate of photosynthesis, stomatal conductance, transpiration and initial Rubisco activity were significantly lower in seedlings grown in ozone environment compared seedlings grown in charcoal-filtered air. All these physiological results supported that biochemical process to be a key feature to understand reduction in photosynthesis.

• Journal of Korean Society of Forest Science
• /
• v.105 no.1
• /
• pp.103-107
• /
• 2016

This study aims to select the most appropriate poplar clones for planting on short rotation coppice poplar plantations in a riparian area. The research investigated biomass production, nitrogen and carbon absorption with 2-year-old poplar (Populus spp.) clones including P. euramericana clone Eco28, P. deltoides hybrid clone 97-18, and P. alba ${\times}$ P. glandulosa hybrid clone 72-30. The average number of stems per stump was five and P. euramericana clone Eco28 had the greatest average number of live stems per stump with 5.9. The average stem diameter was 23.2 mm, and P. deltoides hybrid clone 97-18 achieved the largest average diameter with 25.4 mm. The average annual above-ground biomass production of Populus deltoides hybrid clone 97-18 was 16.1 ton/ha/year, followed by P. alba ${\times}$ P. glandulosa hybrid clone 72-30 and P. euramericana clone Eco28, 12.3 and 5.4 ton/ha/year, respectively. The average annual nitrogen uptake of poplar clones was 46.5 kg/ha/year. P. alba ${\times}$ P. glandulosa hybrid clone 72-30 had the highest average, 63.1 kg/ha/year. The average of annual carbon absorption was estimated 5.3 ton/ha/year and Populus deltoides hybrid clone 97-18 showed the best results with 7.7 ton/ha/year. Based on the results given above, P. deltoides hybrid aspen clone 97-18 is considered as the most suitable poplar clones for wood biomass production on riparian areas.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.252-254
• /
• 2004

In the past several years phytoremediation, defined as the use of plants for removing contaminants from media such as soils or water, has attracted a great deal of interest as a potentially useful remediation technology. In this study, we have attempted to asses the effectiveness of phytoremeidation of disel contaminate soils using hybrid poplar species. 3 poplar species had removed disel from soil effectively and toxic effect was also observed over 2500mg/kg disel contaminated soil, which indicating reducing disel removal.

• KSBB Journal
• /
• v.7 no.2
• /
• pp.85-91
• /
• 1992

The role of NAA(1-Naphthaleneacetic acid) and BA(6-Benzyladenine) in the adventitious shoot regeneratlon from Populus leaf segments and changes in the pattern of RNA and protein synthesis were investigated. The adventitious shoot regeneration octured at the basal cut end of Populus leaf segments. This process was effected by many factors, including wounding culture conditions, light and plant growth regulators etc. The highest adventitious shoot regeneration frequency was obtained at $0.01mg/\ell$ NAA with $0.2mg/\ell$ BA. In this condition adventitious shoot starved to regenerate on the 13th day of oullure. The most optimal hormone composition for RNA and protein synthesis was $0.01mg/\ell$ NAA with $0.2mg/\ell$ BA. The content of RNA and protein was greater at the proximal part. In the course of adventitious shoot regeneration, the proteins associated with polar-regeneration appeared at the proximal part of populus leaf segment.

• Journal of Plant Biotechnology
• /
• v.3 no.3
• /
• pp.131-134
• /
• 2001

In $\lambda$-Zap II vector system, a cDNA library was constructed for the developing secondary xylem mRNA from hybrid poplar, Populus nigra x maximowiczii. A cDNA clone of 1.5 kb in size, pOMTB1.4 encoding a lignin-bispecific O-methyltransferase was screened by plaque hybridization using a probe of 540 bp cDNA amplified by polymerase chain reaction from the cDNA library and identified by nucleotide sequencing. Its nucleotide sequence contains one open reading frame of 366 amino acids. The deduced amino acid sequence in comparison with that of Populus tremuloides showed the differences of 9 amino acids and revealed 85-99% homology among alfalfa, poplar and aspen.

• Journal of Plant Biotechnology
• /
• v.42 no.2
• /
• pp.93-103
• /
• 2015

The isolation, cloning, and characterization of an R2R3-MYB transcription factor gene (MtMYB70) from the model legume Medicago truncatula is reported. MtMYB70 consists of a 768-bp coding sequence corresponding to 255 amino acids. Sequence alignment revealed that MtMYB70 cDNA contains conserved R2R3-type MYB domains with highly divergent C terminal regions. MtMYB70 was found to have relatively low sequence homology with known R2R3-MYB genes. Phylogenetic analysis placed the R2R3-MYB domain of MtMYB70 closest to PtMYB1, a known activator of lignin biosynthesis. Overexpression of MtMYB70 under the control of the 35S promoter in transgenic poplar did not cause a significant difference in total lignin content relative to the control, but glucan content was significantly increased in transgenic poplar. Therefore, MtMYB70 might have regulatory role in the biosynthesis of cell wall structural carbohydrates.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.5 s.133
• /
• pp.66-75
• /
• 2005

Soybean-based adhesives have recently been reconsidered as alternatives to petroleum-based adhesives due to the uncertainty of availability of petrochemical products and the increased demand for wood adhesives. This study was conducted to investigate the adhesive properties of alkaline phenolic soy (APS) resin for hybrid poplar flakeboard. The APS resin was formulated by crosslinking an alkaline soy flour hydrolyzate with lab-prepared PF resin in the soy hydrolyzate to PF resin weight ratios of 70/30, 60/40, and 50/50. The APS resins were used to fabricate homogeneous hybrid poplar flakeboards with different resin solid levels (5%, 7%, and 9%), press temperatures (175 and $200^{\circ}C$), and press times of 8 and 10 minutes. The IB, wet MOR, and dimensional stability properties of board improved with increasing press time, press temperature, and PF level in APS resins. Increasing press time can be used to offset poor IB strength associated with a 9% resin solid level and the excessive moisture content in the mat. The following conditions were concluded to meet the requirements of the CSA standard for exterior-grade flakeboard: a 50% PF level, a 5% resin content, a $200^{\circ}C$ press temperature, and an 8 minute press time.

• Journal of Korea Foresty Energy
• /
• v.22 no.2
• /
• pp.1-17
• /
• 2003

Populus species have been as a model species in tree breeding and we have enormous varieties resulting from the poplar breeding because of their fast growth performance and short rotation age. New varieties developed in Korea are common italian poplar(P euramericana, I-214, I-476), P euramericana“Eco 28”(Italian poplar No.1) and p. deltoides“Lux”(Italian poplar No.2), which were introduced from foreign countries. As hybrid polars, Hyun-Sasi(p. alba ${\times}$ P. glandulosa No.1, No.2, No.3, No4.), P. nigra x P. maximowiczii and P. koreana x P. nigra val. italica, were developed, and P. davidiana was selected as the result of selection breeding The total plantation areas covered with the new varieties are 935,162ha that include 745,773ha of P. euramericana, 184,636ha of P. alba x P. glandulosa, and other new varieties are 4,735ha. The new poplars are contributed to increase farmer's income as well as bare land tree-planting in Korea. The technologies associated with the poplar species were developed, such as the determination of optimum site for new the poplar species, the crossing method between incompatible poplar species, and the vegetative mass propagation. In the future, poplar species will be considered for phytoremediation species at contaminated areas such as landfill sites or with lives stock's waste water as well as wood production, a shade tree like road-side tree and public park tree.

• Korean Journal of Plant Resources
• /
• v.21 no.3
• /
• pp.204-209
• /
• 2008

We have cloned an LTP gene (PoLTP1) from poplar (Populus alba ${\times}$ P. tremula var. glandulosa) suspension cells and examined changes in its expression levels in response to various stresses and ABA treatment. The full-length PoLTP1 cDNA clone encodes a polypeptide of 116 amino acids with typical characteristics of LTPs, notably a conserved arrangement of cysteine residues. Southern blot analysis indicate that two or three copies of the PoLTP1 are present in the genome of the investigated hybrid poplar. In addition, northern analysis of samples from soil-grown plants indicate that PoLTP1 is tissue-specifically expressed in the leaves and flowers. The gene is significantly up-regulated by treatment with mannitol, NaCl and ABA, but not by either cold or wounding. These results indicate that PoLTP1 is involved in osmotic stress responses in poplar plants and suspension cells.

• Journal of Forest and Environmental Science
• /
• v.36 no.4
• /
• pp.259-266
• /
• 2020

Poplar trees from the Salicaceae family over the years have been utilized for various reasons which include prevention of deforestation as well as phytoremediation. This study aims to determine the optimal pre-treatment and soil conditions required for propagation of poplar cuttings for increased initial adaptability and survival rate. Five poplar clones (Hanan, 110, 107, DN-34, 52-225) were selected for IBA, soil composition treatments on propagation. IBA pre-treatment of cuttings were utilized 0, 10, and 100 mg l-1 concentrations. Soil compositions were amended with TKS-2+perlite 2:1 (v:v) and sandy clay loam mixed with artificial soil. According to the greenhouse results 10 mg l-1 of IBA showed a significant increase in plant height whereas 100 mg l-1 inhibited plant growth except in clone 110. Soil composition severely affected root growth and hence overall growth of the clones. Sandy clay loam soil had poor to stunted growth compared to TKS-2+perlite.