• Restorative Dentistry and Endodontics
• /
• v.30 no.3
• /
• pp.158-169
• /
• 2005

This study was done to evaluate the shear bond strength between light-cured glass ionomer cement (GIC) base and resin cement for luting indirect resin inlay and to observe bonding aspects which is produced at the interface between them by SEM. Two types of light cured GIC (Fuji II LC Improved, GC Co. Tokyo, Japan and Vitrebond$^{TM}$, 3M, Paul Minnesota U.S.A) were used in this study. For shear bond test, GIC specimens were made and immersed in 37$^{\circ}C$ distilled water for 1 hour, 24 hours, 1 week and 2 weeks. Eighty resin inlays were prepared with Artglass$^{(R)}$ (Heraeus Kultzer Germany) and luted with Variolink$^{(R)}$ II (Ivoclar Vivadent, Liechtenstein). Shear bond strength of each specimen was measured and fractured surface were examined. Statistical analysis was done with one-way ANOVA. Twenty four extracted human third molars were selected and Class II cavities were prepared and GIC based at axiopulpal lineangle. The specimens were immersed in 37$^{\circ}C$ distilled water for 1 hour, 24 hours, 1 week and 2 weeks. And then the resin inlays were luted to prepared teeth. The specimens were sectioned vertically with low speed saw. The bonding aspect of the specimens were observed by SEM (JSM-5400$^{(R)}$, Jeol, Tokyo, Japan) .There was no significant difference between the shear bond strength according to storage periods of light cured GIC base. And cohesive failure was mostly appeared in GIC On scanning electron micrograph, about 30 - 120 $\mu$m of the gaps were observed on the interface between GIC base and dentin. No gaps were observed on the interface between GTC and resin inlay.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.73-83
• /
• 1993

The purpose of this study was to evaluate the effect of various acid treatments on dentin bonding. Freshly extracted human teeth were uprightly embedded in self curing acrylic resin, and their occlusal surfaces were grinded to expose flat dentin surfaces. The specimens were divided into 4 groups. Specimens of one group were not treated so as to be a control and those of the other three groups were threated with 10% polyacrylic acid, 10% phosphoric acid, and 10-3 solution(10% citric acid/3% ferric chloride) respectively. Primer, bonding resin and composite resin were applied over the treated dentin surfaces sequentially. All specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured and the treated dentin surfaces and fracured dentin surfaces were examined under a scanning electron microscope. The results were as follows: Bond strengths of acid-treated groups were higher than those of the untreated group. In the acid-treated groups, bond strength was found to be the highest in the 10-3 solution group followed by the 10% phosphoric acid group and the 10% polyacrylic acid group(P<0.01). On SEM examination of dentin surfaces, the untreated dentin surface showed a remaining smear layer and closed dentinal tubules. Dentin surfaces treated with 10 % polyacrylic acid showed a clean dentin surface without the smear layer, but showed remaining smear plugs in dentinal tubules. A dentin surface treated with 10% phosphoric acid or 10-3 solution showed open dentinal tubules without the smear layer or smear plugs. On SEM observation of the fractured dentin-resin interface, the untreated group showed that failure occurred in the smear layer. The group treated with 10% polyacrylic acid showed no resin tag remained in the dentinal tubules, but resin tags in the dentinal tubules were observed in the group treated with the 10% phosphoric acid or the 10-3 solution. On the failure mode examination, the higher the bond strength of the group, the higher the frequency of cohesive failure. The coefficient between bond strength and cohesive failure rate was 0.71.

• Restorative Dentistry and Endodontics
• /
• v.35 no.2
• /
• pp.125-133
• /
• 2010

Objectives: Rapid polymerization of overlying composite resin causes high polymerization shrinkage stress at the adhesive layer. In order to alleviate the shrinkage stress, increasing the light intensity over the first 5 seconds was suggested as an exponential curing mode by an LED light curing unit (Elipar FreeLight2, 3M ESPE). In this study, the effectiveness of the exponential curing mode on reducing stress was evaluated with measuring microtensile bond strength of three adhesives after the overlying composite resin was polymerized with either continuous or exponential curing mode. Methods: Scotchbond Multipurpose Plus (MP, 3M ESPE), Single Bond 2 (SB, 3M ESPE), and Adper Prompt (AP, 3M ESPE) were applied onto the flat occlusal dentin of extracted human molar. The overlying hybrid composite (Denfil, Vericom, Korea) was cured under one of two exposing modes of the curing unit. At 48h from bonding, microtensile bond strength was measured at a crosshead speed of 1.0 mm/min. The fractured surfaces were observed under FE-SEM. Results: There was no statistically significant difference in the microtensile bond strengths of each adhesive between curing methods (Two-way ANOVA, p > 0.05). The microtensile bond strengths of MP and SB were significantly higher than that of AP (p < 0.05). Mixed failures were observed in most of the fractured surfaces, and differences in the failure mode were not observed among groups. Conclusion: The exponential curing method had no beneficial effect on the microtensile dentin bond strengths of three adhesives compared to continuous curing method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.75-88
• /
• 2009

This paper presents a video quality assessment method based on quality degradation factors of real-time multimedia streaming services. The video quality degradation is caused by video source compression and network states. In this paper, we propose a blocky metric on an image domain to measure quality degradation by video compression. In this paper, the proposed boundary strength index for the blocky metric is defined by ratio of the variation of two pixel values adjacent to $8{\times}8$ block boundary and the average variation at several pixels adjacent to the two boundary pixels. On the other hand, unnatural image movement caused by network performance deterioration such as jitter and delay factors can be observed. In this paper, a temporal-Jerkiness measurement method is proposed by computing statistics of luminance differences between consecutive frames and play-time intervals between frames. The proposed final Perceptual Video Quality Metric (PVQM) is proposed by consolidating both blocking strength and temporal-jerkiness. To evaluate performance of the proposed algorithm, the accuracy of the proposed algorithm is compared with Difference of Mean Opinion Score (DMOS) based on human visual system.

• Journal of the Korea Concrete Institute
• /
• v.24 no.4
• /
• pp.369-379
• /
• 2012

The collapse of concrete structures by extreme loads such as impact, explosion, and blast from terrorist attacks causes severe property damage and human casualties. Concrete has excellent impact resistance to such extreme loads in comparison with other construction materials. Nevertheless, existing concrete structures designed without consideration of the impact or blast load with high strain rate are endangered by those unexpected extreme loads. In this study, to improve the impact resistance, the static and impact behaviors of concrete beams caste with steel fiber reinforced concrete (SFRC) with 0~1.5% (by volume) of 30 mm long hooked steel fibers were assessed. Test results indicated that the static and impact resistances, flexural strength, ductility, etc., were significantly increased when higher steel fiber volume fraction was applied. In the case of the layered concrete (LC) beams including greater steel fiber volume fraction in the tensile zone, the higher static and impact resistances were achieved than those of the normal steel fiber reinforced concrete beam with an equivalent steel fiber volume fraction. The impact test results were also compared with the analysis results obtained from the single degree of freedom (SDOF) system anaysis considering non-linear material behaviors of steel fiber reinforced concrete. The analysis results from SDOF system showed good agreement with the experimental maximum deflections.

• Journal of Korean society of Dental Hygiene
• /
• v.2 no.1
• /
• pp.97-113
• /
• 2002

This research is an attempt to establish a basic material in discovering the subjective types of the dental coordinators occupational consciousness, utilizing the Q-Method Theory, which is capable of measuring the subjective nature of human being by scientific and systematic method. The characteristics of each type were analyzed so as to have the dental coordinator to possess the desirable understanding of the occupational view together for them to have self-confidence as a lifetime specialty occupation. Upon completion of the study, it was found that there are three types of subjective views pertaining to the occupational consciousness on the dental coordinator. The result on the analysis of the characteristics is as follows : Type 1 is the Taking Serious View on the Patient Service, which priority is placed on kindness and looking after any difficulties of the patient, namely, it is the type that puts the importance on the high level medical examination and treatment based on good service. Because of the kind service to the patient, those under this category considered their job satisfaction have been improved. It goes without saying that they were developing the services, which satisfy themselves, and it was confirmed that they thought that they should make things smooth for any development of problems that may arise between the patient and the dentist. Type 2 is the Taking Serious View on Career and Organizational Strength. This is a type that aims on the systematic nature of the internal job, namely, organizational strength itself viewed from the stand point thai either self-confident or work merit is proportional to experience. This type is to actively treat the problem and endeavor to solve the issue when dissatisfaction is held by the dental hospital system, which is either followed according to the work responsibility or by an organization having an appropriate system on remuneration, Type 3 is the Placing of Importance on the Overall Circumstances. This is the type that places importance on the overall now of the dental hospital, and it is the type, that most greatly recognizes the importance of the role of the dental coordinator. The dental coordinator should provide the sense of reliability to both the dentist and to the staff of the medical examination and treatment and should be able to adjust smoothly the overall now of the medical treatment. The dental coordinator is expected to be a medical service specialist, who is capable to solve the problems of the staff of the medical treatment intuitively and to adjust the relation between the employees. With the above result, it was found that although there was no mutual exclusiveness between the respective types, there are particular characteristics among each type. Therefore, this research has discovered and analyzed the subjective view types relative to the occupational consciousness of the dental coordinator for the proper understanding on the characteristics of each type to enable the dental sanitary students and the graduates of the Dental Sanitary Department, who are aspiring to become dental coordinator, as the basic guide material to be actively utilized.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.289-301
• /
• 2017

As earthquakes have frequently happened all over the world, huge losses of human life and property have occurred. Therefore, retrofitting and strengthen technologies of non-seismically designed structures in Korea are urgent. Also, there has been a growing interest about seismic retrofitting, where researches on the topic have been actively pursued in Korea. The study results showed that ductility inducing retrofitting method is more superior stiffness inducing method. In Japan, Super Reinforcement with Flexibility (SRF) was introduced. Therefore, in this study, seismic performance evaluation was performed through pseudo dynamic test and uniaxial compression test for RC column retrofitted by PolyUrea for ductility inducing retrofitting material. Uniaxial compression test results showed that strength of all specimens retrofitted by PolyUrea was higher than that of RC specimens. Also, all specimens retrofitted by PolyUrea also showed ductile fracture behavior. In pseudo dynamic test, by appling real earthquake record, the seismic behavior of RC column reinforced by PolyUrea was evaluated through relative displacement, reinforcement strain, displacement ductility, and dissipation energy. The results showed that PolyUrea helped to enhance seismic performance of RC columns.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.552-557
• /
• 2015

Recent performed by recognizing a user's location, various services have been tailored focus on short-range wireless communication technology. A beacon in which is attracting attention as next-generation technology. Beacon is a terminal by utilizing the frequency of the non-audible area can not be bluetooth and human sending and receiving terminals and information, Apple recently iBeacon like a low-power Bluetooth (BLE; bluetooth low energy) based beacon showing a tendency to rise into the mainstream there. Services using a beacon is basically installs the terminal in a certain place indoor. It is characterized by providing the user the services to catch the user's position, even automatically take a separate action. Various types of location-based service provided by the target interior space began to attract attention. A variety of location-based services are provided in the interior space in order to be successfully deployed and provide guidance to the interior space, the movement route and the like are essentially required to build various types of information. In this paper, for efficient indoor positioning by varying the signal strength of the beacon in such areas were measured and analyzed.

• Restorative Dentistry and Endodontics
• /
• v.24 no.3
• /
• pp.465-472
• /
• 1999

The aim of this study was to determine the shear bond properties of four dentin bonding systems to internal cervical dentin, and to investigate the effect of the pretreatment for removing smear layer and position of dentin on shear bond strength of dentin bonding agents. The materials tested in this study were consisted of four commercially available dentin bonding systems[Allbond 2(AB), Clearfil Linerbond 2(CL), Optibond FL(OP), Scotchbond Multi-purpose(SB)], a restorative light-cured composite resin[Z100]J and a chelating agent[RC-prep(RC)]. Fifty-six freshly extracted human molars were used in this study. Dentin specimens were prepared by first cutting the root of the tooth 1mm below the cementoenamel junction with a diamond bur in a high speed handpiece under air-water coolant, and then removing occlusal part at pulp horn level by means of a second parallel section, The root canal areas were exposed by means of cutting the dent in specimens perpendicular to the root axis. Dentin specimens were randomly assigned to two groups(pretreated group, not-pretreated group) based on the pretreatment method of dentin surface. In pretreated group, RC was applied to dentin surface for 1minute and then rinsed with NaOCl. In not-pretreated group, dentin surface was rinsed with saline Each groups were subdevided into four groups according to dentin bonding systems. Four dentin bonding systems and a restorative resin were applied according to the directions of manufacturer. The dentin-resin specimens were embedded in a cold cure acrylic resin, and were cut with a low speed diamond saw to the dimension of $1{\times}1mm$. The cut specimens were divided into three groups according to the position of internal cervical dentin. The shear bond properties of dentin-resin specimens were measured with Universal testing machine (Zwick, 020, Germany) with the cross head speed of 0.5mm/min. From this experiment. the following results were obtained : 1. In case of shear bond strength, there was no significant difference among dentin bonding systems in not-pretreated groups, whereas in pretreated groups, the shear bond strengths of AB and of SB were statistically significantly higher than those of CL and of OP. 2. The shear bond strengths of AB and of SB in pretreated groups were significantly higher than those in not-pretreated groups. 3. The shear bond strengths of radicular layer of OP were higher than those of occlusal layer of OP in not-pretreated groups, and of AB in pretreated groups. The shear bond strengths of radicular layer of AB and of CL in not-pretreated groups were higher than those in pretreated group.

• Child Health Nursing Research
• /
• v.5 no.2
• /
• pp.185-197
• /
• 1999

In the family life cycle, the most important task the families with school children should perform is ‘child education’ and ‘socialization’ However, economic stress on poor families with school children presents multiple problems through the shortage of resources necessary for child education and socialization, inappropriateness of family appraisal, and the insufficiency of the control channels for the efficient management of these confined resources and appropriate appraisal. The objectives of this article are : First, to report research on the actual conditions of the poor families in one area of Cheju and on the relevant health welfare policy, and to examine the appropriateness of the direction and the substance of this policy in terms of the intervention in economic stress on the poor families under the categories of resource management and control of appraisal. Second, to analyze qualitative data extracted from the memoirs of single-parent families living in several areas of Korea under the conceptual framework constructed by literature review in order to get a better understanding of the stress which poor families with school children have experienced. And third, to confirm the factors that can be risk factor but, at the same time, strength to these poor families from presented data and to use them as the basic data from which an intervention model can be developed, based on resource management and control of appraisal. The findings of this article are : First, while the number of absolute poor families in one area of Cheju is increasing and, as a result, the danger of the possibility that multiple problems will occur is also growing, the supporting level of the current policy is no more than a direct resource offer and there is no evidence that resource management is being professionally carried out. When it comes to control of appraisal, due to absence of the professional human resources in this matter, policy performances such as technical education training can have a negative impact. Second, a conceptual framework introduced in this article, ; Economic Pressure → Helplessness → Poor self-esteem → Marital Conflict → Parent-Child financial conflict → Inappropriate socialization → Poor child social competence : is partly verified. And third, judging from the results of the qualitative data, it is confirmed that the healing families, having overcome poverty, show several positive characteristics including : hope, strength, and social support. These findings are identified with the factors of resiliency considered above. According to these results, this article suggests the following. The anti -poverty policy in the future should focus not only on a direct resource offer but also on resource management and the control of appraisal that can magnify its effects. In particular, close attention should be paid to school children since they are in the most crucial period for socialization. Moreover, an emotional labor is such an essential resource for intervention that skilled nurses should play pivotal roles.