References
- Feilzer AJ, de Gee AJ, Davidson CL. Curing contraction of composites and glass-ionomer cements. J Prosthet Dent 59:297-300, 1988. https://doi.org/10.1016/0022-3913(88)90176-X
- Davidson CL, Feilzer AJ. Polymerization shrinkage and polymerization shrinkage stress in polymer-based restoratives. J Dent 25(6):435-440, 1997. https://doi.org/10.1016/S0300-5712(96)00063-2
- Davidson CL, De Gee AJ, Feilzer A. The competition between the composite-dentin bond strength and the polymerization contraction stress. J Dent Res 63(12):396-1399, 1984.
- Feilzer AJ, de Gee AJ, Davidson CL. Setting stress in composite resin in relation to configuration of the restoration. J Dent Res 66(11):1636-1639, 1987. https://doi.org/10.1177/00220345870660110601
- Kempt-Scholte CM, Davidson CL. Marginal integrity related to bond strength and strain capacity of composite resin restorative systems. J Prosthet Dent 64:658-664, 1990. https://doi.org/10.1016/0022-3913(90)90291-J
- Chye CH, Yap AUJ, Laim YC, Soh MS. Post-gel polymerization shrinkage associated with different light curing regimens. Oper Dent 30(4):474-480, 2005.
- Davidson CL. Resisting the curing contraction with adhesive composites. J Prosthet Dent 55(4):446-447, 1986. https://doi.org/10.1016/0022-3913(86)90173-3
- Mehl A, Hickel R, Kunzelmann KH. Physical properties and gap formation of light-cured composites with and without 'softstart-polymerization'. J Dent 25(3-4):321-330, 1997. https://doi.org/10.1016/S0300-5712(96)00044-9
- Uno S, Asmussen E. marginal adaptation of a restorative resin polymerized at reduced rate. Scand J Dent Res 99:440-444, 1991.
- Sakaguchi RL, Berge HX. Reduced light energy density decreases post-gel contraction while maintaining degree of conversion in composites. J Dent 26(8):695-700, 1998. https://doi.org/10.1016/S0300-5712(97)00048-1
- Unterbrink GL, Muessner R. Influence of light intensity on two restorative systems. J Dent 23(3):183-189, 1995. https://doi.org/10.1016/0300-5712(95)93577-O
- Oberholzer G, Botha CT, Preez IC. Advances in light curing units and curing techniques : a literature review. SADJ 60(10):451-454, 2005.
- Suh BI. Controlling and understanding the polymerization shrinkage-induced stresses in light-cured composites. Compend Contin Educ Dent Suppl 20:s34-s41, 1999.
- Price RBT, Ehrnford L, Andreou P, Felix CA. Comparison of quartz-tungsten-halogen, light-emitting diode, and plasma arc curing lights. J Adhes Dent 5:193-207, 2003.
- Miyazaki M, Oshida Y, Moore BK, Onose H. Effect of light exposure on fracture toughness and flexural strength of light-cured composites. Dent Mater 12(6):328-332, 1996. https://doi.org/10.1016/S0109-5641(96)80042-X
- 임미영, 조경모, 홍찬의. 가변광도 중합에 따른 복합레진의 중합수축에 관한 연구. 대한치과보존학회지 32(1):28-36, 2007.
- Burgess JO, Walker RS, Porche CJ, rappold AJ. Light curing-an update. Compednd Cont Educ Dent 23(10):889-906, 2002.
- Goracci G, Casa de Martinis L, Mori G. Curing lightintensity and marginal leakage of resin composite restoration. Quintessence Int 27:355-362, 1996.
- Bouschlicher MR, Rueggeberg FA. Effect of ramped light intensity on polymerization force and conversion in a photoactivated composite. J Esthet Dent 12:328-339, 2000. https://doi.org/10.1111/j.1708-8240.2000.tb00242.x
- Deliperi S, Bardwell DN. An alternative method to reduce polymerization shrinkage in direct posterior composite restorations. J Am Dent Assoc 133:1387-1398, 2002. https://doi.org/10.14219/jada.archive.2002.0055
- Yap AUJ, Soh MS. Curing efficacy of a new generation high-power LED lamp. Oper Dent 30(6):758-763, 2005.
- Hofmann N, Hunecke A. Influence of curing methods and matrix type on the marginal seal of class II resinbased composite restorations in vitro. Oper Dent 31(1):97-105, 2006. https://doi.org/10.2341/04-194
- Koran P, Kurschner R. Effect of sequential versus continuous irradiation of a light-cured resin composite on shrinkage, viscosity, adhesion, and degree of polymerization. Am J Dent 11(1):17-22, 1998.
- Silikas N, Eliades G, Watts DC. Light intensity effects on resin-composite degree of conversion and shrinkage strain. Dent mater 16(4):292-296, 2000. https://doi.org/10.1016/S0109-5641(00)00020-8
- Friedl KH, Schmalz G, Hiller KA, Markl A. Marginal adaptation of Clss V restorations with and without softstart-polymerization. Oper Dent 23(1):26-32, 2000.
- Yap AUJ, Seneviratne C. Influence of light energy density on effectiveness of composite cure, Oper Dent 26:460-466, 2001.
- Van Meerbeek B, Willems G, Celis JP, Roos JR, Braem M, Lambrechts P, Vanherle G. Assessment by nanoindentation of the hardness and elasticity of the resindentin bonding area. J Dent Res 72:1434-1442, 1993. https://doi.org/10.1177/00220345930720101401
- Venz S, Dickens B. Modified surface-active monomers for adhesive bonding to dentin. J Dent Res 72:582-586, 1993. https://doi.org/10.1177/00220345930720030501
- Perdigao J, Ramos J, Lambrechts P. In vitro interfacial relationship between human dentin and one-bottle dental adhesives. Dent Mater 13:218-227, 1997. https://doi.org/10.1016/S0109-5641(97)80032-2
- Choi KK, Condon JR, Ferracane JL. The effects of adhesive thickness on polymerization contraction stress of composite. J Dent Res 79:812-817, 2000. https://doi.org/10.1177/00220345000790030501
- Zheng L, Pereira PNR, Nakajima M, Sano H, Tagami J. Relationship between adhesive thickness and microtensile bond strength. Oper Dent 26:97-104, 2001.
- Cho BH, Dickens SH. Effects of the acetone content of single solution dentin bonding agents on the adhesive layer thickness and the microtensile bond strength. Dent Mater 20:107-115, 2004. https://doi.org/10.1016/S0109-5641(03)00071-X
- Dickens SH, Cho BH. Interpretation of bond failure through convesion and residual solvent measurements and Weibull analyses of flexural and microtensile bond strengths of bonding agents. Dent Mater 21:354-364, 2005. https://doi.org/10.1016/j.dental.2004.05.007
- Scherrer SS, Denry I, Wiskott A, Belser U. Effect of water exposure on the fracture toughness and flexural strength of a dental glass. Dent Mater 17:367-371, 2001. https://doi.org/10.1016/S0109-5641(01)00002-1
- Price RB, Bannerman RA, Rizkalla AS, Hall GC. Effect of stepped vs. continuous light curing exposure on bond strengths to dentin. Am J Dent 13:123-128, 2000.
- Caldwell R, Kulkarni G, Titley K. Does single versus stepped curing of composite resins affect their shear bond strength? J Can Dent Assoc 67(10):588-592, 2001.
- Dauvillier BS, Aarnts MP, Feilzer AJ. Developments in shrinkage control of adhesive restoratives. J Esthet Dent 12(6):291-299, 2000. https://doi.org/10.1111/j.1708-8240.2000.tb00238.x
- Dennison JB, Yaman P, Seir R, Hamilton JC. Effect of variable light intensity on composite shrinkage. J Prosthet Dent 84(5):499-505, 2000. https://doi.org/10.1067/mpr.2000.110494
- Park JG, Cho BH, Lee IB, Kwon HC, Um CM. The effects of various light intensity on the polymerization of resin composites. J Kor Acad Cons Dent 26(1): 86-94, 2001.
- 윤용환, 박성호. 복합레진의 간헐적 광중합 방법이 변연적합도에 미치는 영향. 대한치과보존학회지 32(3): 248-259, 2007. https://doi.org/10.5395/JKACD.2007.32.3.248
Cited by
- The effect of the strength and wetting characteristics of Bis-GMA/TEGDMA-based adhesives on the bond strength to dentin vol.36, pp.2, 2011, https://doi.org/10.5395/JKACD.2011.36.2.139