• 전기학회논문지P
• /
• 제58권4호
• /
• pp.447-450
• /
• 2009

In order to protect conductors from oscillations or vibrations due to winds, spacer dampers are installed on overhead transmission lines. Generally the spacer damper clamp can move slightly according to oscillation directions, namely in longitudinal, vertical & horizontal directions. This is for reducing fatigue phenomena of the conductor. But the high longitudinal- displacement of the clamp raises a doubt for its necessity. Then this paper carried out oscillation tests by using 4 bundle test lines, to know the relation between longitudinal displacement and oscillation. and suggests design necessity of the longitudinal articulation part for spacer damper clamps.

• Journal of the Optical Society of Korea
• /
• 제4권1호
• /
• pp.58-61
• /
• 2000

Viewing zone shape and size perform a key role in creating viewing comfort for the viewer. The horizontal and vertical sizes of viewing zones, formed by a full color transmission type holographic screen with a stereoscopic image projection are investigated. The screens have been recorded as holograms of a narrow stripe shaped object with different width; to extend the vertical size of the viewing zone the holograms were exposed two times with the hologram shifting between exposures. The viewing zone parameters were measured as a function of the stripe width of the object and of the exit pupil size of projection optics for several holographic screens having the size of the 30 $\times$ 40 $\textrm{cm}^2$.

• 한국전자파학회논문지
• /
• 제9권2호
• /
• pp.141-148
• /
• 1998

빔 성형 안테나를 개발하기 위해서 변형된 전송선로형 안테나(MTLA)의 둘레 및 수평, 수직 소자 길이를 가변한다. 빔 틸트 특성의 검증을 위해 각각의 변형된 형상을 갖는 MTLA에 대한 수직면 방사패턴을 모먼트법으로 해석한다. 해석 결과로부터 구현될 수 있는 최대 빔 틸트는 주로 수직 소자길이에따라 결정된다는 사실올 확 인하였다. 최대 빔 틸트를 갖는 안테나를 셜게하고 입력 임피던스 및 방사 특성을 이론적으로 계산하고 실험에 의하여 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1804-1806
• /
• 1997

Route conditions, applied voltage and the condition of stringing conductors should be considered in determining standard types and skeleton diagrams of towers. In skeleton diagrams the necessary number of insulators and the air clearance have been decided by the results of studies on insulation coordination. Galloping, sleet-jumping, sag characteristics and the possibility of closeness of conductors should be considered according to the condition of stringing conductor and the span. After reviewing those factors, it is necessary to determine the minimum vertical and horizontal distance for the safety of transmission lines under any circumstances. Also it should be economical.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.421-424
• /
• 2000

This paper investigates the characteristics of analytical models in prediction of sound transmission loss for the multi-layered panels with high density mineral wools. The results show that the sandwich model is more adequate to account for sound insulation performance of those panels than the poro-elastic model. In order to improve STC(Sound Transmission Class), the effect of fiber directions of mineral wools is examined, analytically and experimentally. From the comparison of the measurements with the predictions, it is evident that the vertical fiber directions of mineral wools enhance STC value up to 6 dB, compared to that of the horizontal fiber directions.

• 한국공간구조학회논문집
• /
• 제20권4호
• /
• pp.45-52
• /
• 2020

In this study, performance experiments were performed on the shape of steel dampers that affect the rocking behavior. Three types of strut shapes of SI type, SV type and SS type were considered as experimental variables. As a result of the experiment, the capacity to resist the moment and drift ratio according to the strut shape of the steel damper was evaluated as very close. Finally, it was evaluated that the SV type steel damper has stable deformation and energy dissipation capability. As a result of the evaluation of the proposed damper transmission force, it is considered that the damper transmission force is evaluated larger than the applied horizontal force, and it is necessary to supplement it.

• 전기의세계
• /
• 제17권3호
• /
• pp.43-56
• /
• 1968

The design of this antenna tower on the publication had been prepared by writer in order to compare with that of towers for power transmission line or to show the differences on designs existing on their design standards. The design of this antenna tower is also featuring on the following points; (1) the height of tower is 150meters high, (2) combined steel angles are adopted besides angles, (3) the direction of 45degree wind is taken account into design, (4) the additional stresses of horizontal members located in the bending points of main posts are contemplated though these additional stressess are not shown on stress diagram.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.609-611
• /
• 2005

In this study electromagnetic wave fields under power lines arc derived by dipole antenna theory and electromagnetic fields under 3 phase power lines with horizontal and vertical configuration are formulated. The calculation results by those formulas were consistent with the results of reference. The formulas were applied to 345[kV] and 765[kV] transmission lines constructed in our country.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.819-821
• /
• 2000

The purpose of swing analysis for prefabricated jumper devices are to prevent flashover between jumper device and tower post. To prevent flashover. proper weight is add to the horizontal rod. This paper is a proposed to the analysis methods and the effects for unbalanced swing characteristics of prefabricated jumper devices. And the proposed technique is applied with the 345kV and 765kV transmission lines.

• 한국결정성장학회지
• /
• 제18권3호
• /
• pp.101-104
• /
• 2008

GaN films were grown on the vertical and horizontal reactors by the hydride vapour phase epitaxy (HVPE). The structural and optical characteristics of the GaN films were investigated depending on the reactor-type. GaN epilayers were characterized by double crystal X-ray diffraction (DC-XRD), transmission electron microscopy (TEM) and photoluminescence (PL). Surface defects of two kinds of the GaN films were revealed by the wet chemical etching method, using $H_3PO_4$ acid at $200^{\circ}C$ for 8 minutes. Hexagonal etch pits were analyzed by optical microscopy and SEM. Etch pit densities were calculated to be approximately $1.4{\times}10^7$ and $1.2{\times}10^6\;cm^{-2}$ for GaN layers grown on horizontal and vertical reactors, respectively. Those results show GaN grown in the vertical reactor having a better quality of optical properties and crystallinity than that in the horizontal reactor.